lkml.org 
[lkml]   [2020]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: allwinner: h6: add eMMC voltage property for Beelink GS1
Hi Clément,

On Mon, Oct 05, 2020 at 08:47:19PM +0200, Clément Péron wrote:
> On Mon, 5 Oct 2020 at 11:21, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Clément,
> >
> > On Sat, Oct 03, 2020 at 11:20:01AM +0200, Clément Péron wrote:
> > > Sunxi MMC driver can't distinguish at runtime what's the I/O voltage
> > > for HS200 mode.
> >
> > Unfortunately, that's not true (or at least, that's not related to your patch).
> >
> > > Add a property in the device-tree to notify MMC core about this
> > > configuration.
> > >
> > > Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board")
> > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > ---
> > > arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > > index 049c21718846..3f20d2c9bbbb 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> > > @@ -145,6 +145,7 @@ &mmc2 {
> > > vqmmc-supply = <&reg_bldo2>;
> > > non-removable;
> > > cap-mmc-hw-reset;
> > > + mmc-hs200-1_8v;
> > > bus-width = <8>;
> > > status = "okay";
> > > };
> >
> > I'm not really sure what you're trying to fix here, but as far as MMC
> > goes, eMMC's can support io voltage of 3.3, 1.8 and 1.2V. Modes up until
> > HS DDR (50MHz in DDR) will use an IO voltage of 3.3V, higher speed modes
> > (HS200 and HS400) supporting 1.8V and 1.2V.
>
> Some users report that the eMMC is not working properly on their
> Beelink GS1 boards.
>
> > The mmc-hs200-1_8v property states that the MMC controller supports the
> > HS200 mode at 1.8V. Now, I can only assume that since BLDO2 is set up at
> > 1.8V then otherwise, the MMC core will rightfully decide to use the
> > highest supported mode. In this case, since the driver sets it, it would
> > be HS-DDR at 3.3V, which won't work with that fixed regulator.
> >
> > I can only assume that enabling HS200 at 1.8V only fixes the issue you
> > have because otherwise it would use HS-DDR at 3.3V, ie not actually
> > fixing the issue but sweeping it under the rug.
> >
> > Trying to add mmc-ddr-1_8v would be a good idea
>
> Thanks for the explanation, this is indeed the correct one.
> So It looks like the SDIO controller has an issue on some boards when
> using HS-DDR mode.
>
> Is this patch acceptable with the proper commit log?

If HS-DDR works, yes, but I assume it doesn't?

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-10-08 17:11    [W:1.404 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site