lkml.org 
[lkml]   [2020]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/2 V2] scripts: coccicheck: Change default value for parallelism
By default, coccicheck utilizes all available threads to implement
parallelisation. However, when all available threads are used,
a decrease in performance is noted. The elapsed time is minimum
when at most one thread per core is used.

For example, on benchmarking the semantic patch kfree.cocci for
usb/serial using hyperfine, the outputs obtained for J=5 and J=2
are 1.32 and 1.90 times faster than those for J=10 and J=9
respectively for two separate runs. For the larger drivers/staging
directory, minimium elapsed time is obtained for J=3 which is 1.86
times faster than that for J=12. The optimal J value does not
exceed 6 in any of the test runs. The benchmarks are run on a machine
with 6 cores, with 2 threads per core, i.e, 12 hyperthreads in all.

To improve performance, modify coccicheck to use at most only
one thread per core by default.

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>

---
Changes in V2:
- Change commit message as suggested by Julia Lawall
Changes in V3:
- Use J/2 as optimal value for machines with more
than 8 hyperthreads as well.
---
scripts/coccicheck | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/scripts/coccicheck b/scripts/coccicheck
index e04d328210ac..a72aa6c037ff 100755
--- a/scripts/coccicheck
+++ b/scripts/coccicheck
@@ -75,8 +75,13 @@ else
OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
fi

+ # Use only one thread per core by default if hyperthreading is enabled
+ THREADS_PER_CORE=$(lscpu | grep "Thread(s) per core: " | tr -cd [:digit:])
if [ -z "$J" ]; then
NPROC=$(getconf _NPROCESSORS_ONLN)
+ if [ $THREADS_PER_CORE -gt 1 -a $NPROC -gt 2 ] ; then
+ NPROC=$((NPROC/2))
+ fi
else
NPROC="$J"
fi
--
2.25.1
\
 
 \ /
  Last update: 2020-10-06 21:07    [W:0.038 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site