lkml.org 
[lkml]   [2020]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/2] dt-bindings: usb: Add binding for discrete onboard USB hubs
On Mon, Oct 5, 2020 at 11:06 AM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> On Sat, Oct 03, 2020 at 08:41:42AM -0400, Alan Stern wrote:
> > On Fri, Oct 02, 2020 at 05:58:22PM -0500, Rob Herring wrote:
> > > On Fri, Oct 2, 2020 at 1:36 PM Alan Stern <stern@rowland.harvard.edu> wrote:
> > > > Regardless of how the situation is represented in DT, there remains the
> > > > issue of where (i.e., in which driver module) the appropriate code
> > > > belongs. This goes far beyond USB. In general, what happens when one
> > > > sort of device normally isn't hooked up through a power regulator, so
> > > > its driver doesn't have any code to enable a regulator, but then some
> > > > system does exactly that?
> > > >
> > > > Even worse, what if the device is on a discoverable bus, so the driver
> > > > doesn't get invoked at all until the device is discovered, but on the
> > > > new system it can't be discovered until the regulator is enabled?
> > >
> > > Yep, it's the same issue here with USB, MDIO which just came up a few
> > > weeks ago, MMC/SD which hacked around it with 'mmc-pwrseq' binding
> > > (not something I want to duplicate) and every other discoverable bus.
> > > What do they all have in common? The kernel's driver model being
> > > unable to cope with this situation. We really need a common solution
> > > here and not bus or device specific hack-arounds.
> >
> > To me this doesn't seem quite so much to be a weakness of the kernel's
> > driver model.
> >
> > It's a platform-specific property, one that is not discoverable and
> > therefore needs to be represented somehow in DT or ACPI or something
> > similar. Something that says "Device A cannot operate or be discovered
> > until power regulator B is enabled", for example.
> >
> > The decision to enable the power regulator at system startup would be
> > kernel policy, not a part of the DT description. But there ought to be
> > a standard way of recognizing which resource requirements of this sort
> > should be handled at startup. Then there could be a special module (in
> > the driver model core? -- that doesn't really seem appropriate) which
> > would search through the whole DT database for resources of this kind
> > and enable them.
>
> This might work for some cases that only have a single resource or multiple
> resources but no timing/sequencing requirements. For the more complex cases
> it would probably end up in something similar to the pwrseq series
> (https://lore.kernel.org/patchwork/project/lkml/list/?series=314989&state=%2A&archive=both),
> which was nack-ed by Rafael, Rob also expressed he didn't want to go
> down that road.

TBC, I'm against repeating a 'pwrseq binding' like MMC has which is a
separate node. That's how the referenced binding started out IIRC, but
I was fine with what's in v16. I'm not against common/generic code for
handling pwrseq for 'simple' cases, but we need to allow for complex
cases and not try to keep extending some generic binding to handle
every last quirk.

Rob

\
 
 \ /
  Last update: 2020-10-05 21:22    [W:0.698 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site