lkml.org 
[lkml]   [2020]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] mtd: spi-nor: Fix address width on flash chips > 16MB
Date
If a flash chip has more than 16MB capacity but its BFPT reports
BFPT_DWORD1_ADDRESS_BYTES_3_OR_4, the spi-nor framework defaults to 3.

The check in spi_nor_set_addr_width() doesn't catch it because addr_width
did get set. This fixes that check.

Signed-off-by: Bert Vermeulen <bert@biot.com>
---
drivers/mtd/spi-nor/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0369d98b2d12..a2c35ad9645c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3009,13 +3009,15 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
/* already configured from SFDP */
} else if (nor->info->addr_width) {
nor->addr_width = nor->info->addr_width;
- } else if (nor->mtd.size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
} else {
nor->addr_width = 3;
}

+ if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ }
+
if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
dev_dbg(nor->dev, "address width is too large: %u\n",
nor->addr_width);
--
2.17.1
\
 
 \ /
  Last update: 2020-10-04 23:32    [W:0.124 / U:25.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site