lkml.org 
[lkml]   [2020]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v13 2/8] mtd: rawnand: rockchip: NFC drivers for RK3308, RK2928 and others
From
Date
Hi Yifeng,

In some functions you deselect the chips.
The MTD frame work has a functions for that and also keeps track of its
select status, so I think that you shouldn't poke with that yourself and
should therefore remove the deselections from your driver.

/**
* nand_deselect_target() - Deselect the currently selected target
* @chip: NAND chip object
*
* Deselect the currently selected NAND target. The result of operations
* executed on @chip after the target has been deselected is undefined.
*/
void nand_deselect_target(struct nand_chip *chip)
{
if (chip->legacy.select_chip)
chip->legacy.select_chip(chip, -1);

chip->cur_cs = -1;
}
EXPORT_SYMBOL_GPL(nand_deselect_target);


On 10/31/20 12:58 PM, Johan Jonker wrote:

[..]

> On 10/28/20 10:53 AM, Yifeng Zhao wrote:

[..]

>> +
>> +static int rk_nfc_write_page_raw(struct nand_chip *chip, const u8 *buf,
>> + int oob_on, int page)
>> +{
>> + struct mtd_info *mtd = nand_to_mtd(chip);
>> + struct rk_nfc *nfc = nand_get_controller_data(chip);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> + int ret = 0;
>> + u32 i;
>> +
>
> /*
> * Normal timing and ECC layout size setup is already done in
> * the rk_nfc_select_chip() function.
> */
>
> How about the ECC layout size setup for a boot block?
>
>> + if (!buf)
>> + memset(nfc->buffer, 0xff, mtd->writesize + mtd->oobsize);
>> +> + for (i = 0; i < ecc->steps; i++) {
>> + /* Copy data to nfc buffer. */
>> + if (buf)
>> + memcpy(rk_nfc_data_ptr(chip, i),
>> + rk_nfc_buf_to_data_ptr(chip, buf, i),
>> + ecc->size);
>
>> + /*
>> + * The first four bytes of OOB are reserved for the
>> + * boot ROM. In some debugging cases, such as with a
>> + * read, erase and write back test these 4 bytes stored
>> + * in OOB also need to be written back.
>> + */
>
>
> /*
> * The first four bytes of OOB are reserved for the
> * boot ROM. In some debugging cases, such as with a
> * read, erase and write back test these 4 bytes stored
> * in OOB also need to be written back.
> *
> * The function nand_block_bad detects bad blocks like:
> *
> * bad = chip->oob_poi[chip->badblockpos];
> *
> * chip->badblockpos == 0 for a large page NAND Flash,
> * so chip->oob_poi[0] is the bad block mask (BBM).
> *
> * The OOB data layout on the NFC is:
> *
> * PA0 PA1 PA2 PA3 | BBM OOB1 OOB2 OOB3 | ...
> *
> * or
> *
> * 0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ...
> *
> * The code here just swaps the first 4 bytes with the last
> * 4 bytes without losing any data.
> *
> * The chip->oob_poi data layout:
> *
> * BBM OOB1 OOB2 OOB3 |......| PA0 PA1 PA2 PA3
> *
> * The rk_nfc_ooblayout_free() function already has reserved
> * these 4 bytes with:
> *
> * oob_region->offset = NFC_SYS_DATA_SIZE + 2;
> */
>
>
>> + if (!i)
>> + memcpy(rk_nfc_oob_ptr(chip, i),
>> + rk_nfc_buf_to_oob_ptr(chip, ecc->steps - 1),
>> + NFC_SYS_DATA_SIZE);
>> + else
>> + memcpy(rk_nfc_oob_ptr(chip, i),
>> + rk_nfc_buf_to_oob_ptr(chip, i - 1),
>> + NFC_SYS_DATA_SIZE);
>> + /* Copy ECC data to the NFC buffer. */
>> + memcpy(rk_nfc_oob_ptr(chip, i) + NFC_SYS_DATA_SIZE,
>> + rk_nfc_buf_to_oob_ecc_ptr(chip, i),
>> + ecc->bytes);
>> + }
>> +
>> + nand_prog_page_begin_op(chip, page, 0, NULL, 0);
>> + rk_nfc_write_buf(nfc, buf, mtd->writesize + mtd->oobsize);
>> + ret = nand_prog_page_end_op(chip);
>> +

>> + /*
>> + * Deselect the currently selected target after the ops is done
>> + * to reduce the power consumption.
>> + */
>> + rk_nfc_select_chip(chip, -1);
>
> Does the MTD framework always select again?

Remove.
Do not assume that the MTD framework or user space knows that you have
deselected the chip.

>
>> +
>> + return ret;
>> +}
>> +
>> +static int rk_nfc_write_oob(struct nand_chip *chip, int page)
>> +{
>> + return rk_nfc_write_page_raw(chip, NULL, 1, page);
>> +}
>> +
>> +static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>> + int oob_on, int page)
>> +{
>> + struct mtd_info *mtd = nand_to_mtd(chip);
>> + struct rk_nfc *nfc = nand_get_controller_data(chip);
>> + struct rk_nfc_nand_chip *rknand = rk_nfc_to_rknand(chip);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> + int oob_step = (ecc->bytes > 60) ? NFC_MAX_OOB_PER_STEP :
>> + NFC_MIN_OOB_PER_STEP;
>> + int pages_per_blk = mtd->erasesize / mtd->writesize;
>> + int ret = 0, i, boot_rom_mode = 0;
>> + dma_addr_t dma_data, dma_oob;
>> + u32 reg;
>> + u8 *oob;
>> +
>> + nand_prog_page_begin_op(chip, page, 0, NULL, 0);
>> +
>> + memcpy(nfc->page_buf, buf, mtd->writesize);
>> +
>> + /*
>> + * The first blocks (4, 8 or 16 depending on the device) are used
>> + * by the boot ROM and the first 32 bits of OOB need to link to
>> + * the next page address in the same block. We can't directly copy
>> + * OOB data from the MTD framework, because this page address
>> + * conflicts for example with the bad block marker (BBM),
>> + * so we shift all OOB data including the BBM with 4 byte positions.
>> + * As a consequence the OOB size available to the MTD framework is
>> + * also reduced with 4 bytes.
>> + *
>
>> + * PA0 PA1 PA2 PA3 | BBM OOB1 OOB2 OOB3 | ...
>
>
> * PA0 PA1 PA2 PA3 | BBM OOB1 OOB2 OOB3 | ...
>
> keep layouts aligned
>
>> + *
>> + * If a NAND is not a boot medium or the page is not a boot block,
>> + * the first 4 bytes are left untouched by writing 0xFF to them.
>> + *
>> + * 0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ...
>> + *
>> + * Configure the ECC algorithm supported by the boot ROM.
>> + */
>> + if ((page < pages_per_blk * rknand->boot_blks) &&
>
> if ((page < (pages_per_blk * rknand->boot_blks)) &&
>
>> + (chip->options & NAND_IS_BOOT_MEDIUM)) {
>> + boot_rom_mode = 1;
>> + if (rknand->boot_ecc != ecc->strength)
>> + rk_nfc_hw_ecc_setup(chip, ecc,
>> + rknand->boot_ecc);
>> + }
>> +
>> + for (i = 0; i < ecc->steps; i++) {
>> + if (!i) {
>> + reg = 0xFFFFFFFF;
>> + } else {
>> + oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
>> + reg = oob[0] | oob[1] << 8 | oob[2] << 16 |
>> + oob[3] << 24;
>> + }
>> + if (!i && boot_rom_mode)
>> + reg = (page & (pages_per_blk - 1)) * 4;
>> +
>> + if (nfc->cfg->type == NFC_V9)
>> + nfc->oob_buf[i] = reg;
>> + else
>> + nfc->oob_buf[i * (oob_step / 4)] = reg;
>> + }
>> +
>> + dma_data = dma_map_single(nfc->dev, (void *)nfc->page_buf,
>> + mtd->writesize, DMA_TO_DEVICE);
>> + dma_oob = dma_map_single(nfc->dev, nfc->oob_buf,
>> + ecc->steps * oob_step,
>> + DMA_TO_DEVICE);
>> +
>> + reinit_completion(&nfc->done);
>> + writel(INT_DMA, nfc->regs + nfc->cfg->int_en_off);
>> +
>> + rk_nfc_xfer_start(nfc, NFC_WRITE, ecc->steps, dma_data,
>> + dma_oob);
>> + ret = wait_for_completion_timeout(&nfc->done,
>> + msecs_to_jiffies(100));
>> + if (!ret)
>> + dev_warn(nfc->dev, "write: wait dma done timeout.\n");
>> + /*
>> + * Whether the DMA transfer is completed or not. The driver
>> + * needs to check the NFC`s status register to see if the data
>> + * transfer was completed.
>> + */
>> + ret = rk_nfc_wait_for_xfer_done(nfc);
>> +
>> + dma_unmap_single(nfc->dev, dma_data, mtd->writesize,
>> + DMA_TO_DEVICE);
>> + dma_unmap_single(nfc->dev, dma_oob, ecc->steps * oob_step,
>> + DMA_TO_DEVICE);
>> +
>
>> + if (boot_rom_mode && rknand->boot_ecc != ecc->strength)
>> + rk_nfc_hw_ecc_setup(chip, ecc, ecc->strength);
>> +
>
>> + if (ret) {
>> + ret = -EIO;
>> + dev_err(nfc->dev,
>> + "write: wait transfer done timeout.\n");
>> + }
>> +
>
>> + if (ret)
>> + return ret;
>
> remove, always deselect
>
> if (!ret) {
>
>> +
>> + ret = nand_prog_page_end_op(chip);
>
> }
>

>> +
>> + /*
>> + * Deselect the currently selected target after the ops is done
>> + * to reduce the power consumption.
>> + */
>> + rk_nfc_select_chip(chip, -1);
>
> Does the MTD framework always select again?

Remove.
Do not assume that the MTD framework or user space knows that you have
deselected the chip.

>
>> +
>> + return ret;
>> +}
>> +
>> +static int rk_nfc_read_page_raw(struct nand_chip *chip, u8 *buf, int oob_on,
>> + int page)
>> +{
>> + struct mtd_info *mtd = nand_to_mtd(chip);
>> + struct rk_nfc *nfc = nand_get_controller_data(chip);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> + int i;
>> +
>
> /*
> * Normal timing and ECC layout size setup is already done in
> * the rk_nfc_select_chip() function.
> */
>
> How about the ECC layout size setup for a boot block?
>
>> + nand_read_page_op(chip, page, 0, NULL, 0);
>> + rk_nfc_read_buf(nfc, nfc->buffer, mtd->writesize + mtd->oobsize);
>> +

>> + /*
>> + * Deselect the currently selected target after the ops is done
>> + * to reduce the power consumption.
>> + */
>> + rk_nfc_select_chip(chip, -1);

Remove.
Do not assume that the MTD framework or user space knows that you have
deselected the chip.

>> +
>> + for (i = 0; i < ecc->steps; i++) {
>> + /*
>> + * The first four bytes of OOB are reserved for the
>> + * boot ROM. In some debugging cases, such as with a read,
>> + * erase and write back test, these 4 bytes also must be
>> + * saved somewhere, otherwise this information will be
>> + * lost during a write back.
>> + */
>> + if (!i)
>> + memcpy(rk_nfc_buf_to_oob_ptr(chip, ecc->steps - 1),
>> + rk_nfc_oob_ptr(chip, i),
>> + NFC_SYS_DATA_SIZE);
>> + else
>> + memcpy(rk_nfc_buf_to_oob_ptr(chip, i - 1),
>> + rk_nfc_oob_ptr(chip, i),
>> + NFC_SYS_DATA_SIZE);
>> + /* Copy ECC data from the NFC buffer. */
>> + memcpy(rk_nfc_buf_to_oob_ecc_ptr(chip, i),
>> + rk_nfc_oob_ptr(chip, i) + NFC_SYS_DATA_SIZE,
>> + ecc->bytes);
>> + /* Copy data from the NFC buffer. */
>> + if (buf)
>> + memcpy(rk_nfc_buf_to_data_ptr(chip, buf, i),
>> + rk_nfc_data_ptr(chip, i),
>> + ecc->size);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int rk_nfc_read_oob(struct nand_chip *chip, int page)
>> +{
>> + return rk_nfc_read_page_raw(chip, NULL, 1, page);
>> +}
>> +
>> +static int rk_nfc_read_page_hwecc(struct nand_chip *chip, u8 *buf, int oob_on,
>> + int page)
>> +{
>> + struct mtd_info *mtd = nand_to_mtd(chip);
>> + struct rk_nfc *nfc = nand_get_controller_data(chip);
>> + struct rk_nfc_nand_chip *rknand = rk_nfc_to_rknand(chip);
>> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> + int oob_step = (ecc->bytes > 60) ? NFC_MAX_OOB_PER_STEP :
>> + NFC_MIN_OOB_PER_STEP;
>> + int pages_per_blk = mtd->erasesize / mtd->writesize;
>> + dma_addr_t dma_data, dma_oob;
>
>> + int ret = 0, i, boot_rom_mode = 0;
>
> int ret = 0, i, cnt, boot_rom_mode = 0;
>
>> + int bitflips = 0, bch_st;
>> + u8 *oob;
>> + u32 tmp;
>> +
>> + nand_read_page_op(chip, page, 0, NULL, 0);
>> +
>> + dma_data = dma_map_single(nfc->dev, nfc->page_buf,
>> + mtd->writesize,
>> + DMA_FROM_DEVICE);
>> + dma_oob = dma_map_single(nfc->dev, nfc->oob_buf,
>> + ecc->steps * oob_step,
>> + DMA_FROM_DEVICE);
>> +
>> + /*
>> + * The first blocks (4, 8 or 16 depending on the device)
>> + * are used by the boot ROM.
>> + * Configure the ECC algorithm supported by the boot ROM.
>> + */
>
>> + if ((page < pages_per_blk * rknand->boot_blks) &&
>
>> + if ((page < (pages_per_blk * rknand->boot_blks)) &&
>
>> + (chip->options & NAND_IS_BOOT_MEDIUM)) {
>> + boot_rom_mode = 1;
>> + if (rknand->boot_ecc != ecc->strength)
>> + rk_nfc_hw_ecc_setup(chip, ecc,
>> + rknand->boot_ecc);
>> + }
>> +
>> + reinit_completion(&nfc->done);
>> + writel(INT_DMA, nfc->regs + nfc->cfg->int_en_off);
>> + rk_nfc_xfer_start(nfc, NFC_READ, ecc->steps, dma_data,
>> + dma_oob);
>> + ret = wait_for_completion_timeout(&nfc->done,
>> + msecs_to_jiffies(100));
>> + if (!ret)
>> + dev_warn(nfc->dev, "read: wait dma done timeout.\n");
>> + /*
>> + * Whether the DMA transfer is completed or not. The driver
>> + * needs to check the NFC`s status register to see if the data
>> + * transfer was completed.
>> + */
>> + ret = rk_nfc_wait_for_xfer_done(nfc);
>
> add empty line
>
>> + dma_unmap_single(nfc->dev, dma_data, mtd->writesize,
>> + DMA_FROM_DEVICE);
>> + dma_unmap_single(nfc->dev, dma_oob, ecc->steps * oob_step,
>> + DMA_FROM_DEVICE);
>> +
>> + if (ret) {
>
>> + bitflips = -EIO;
>
> ret = -EIO;
>
> return only "0" or official error codes
>
>> + dev_err(nfc->dev,
>> + "read: wait transfer done timeout.\n");
>> + goto out;
>> + }
>> +
>> + for (i = 1; i < ecc->steps; i++) {
>> + oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
>> + if (nfc->cfg->type == NFC_V9)
>> + tmp = nfc->oob_buf[i];
>> + else
>> + tmp = nfc->oob_buf[i * (oob_step / 4)];
>> + *oob++ = (u8)tmp;
>> + *oob++ = (u8)(tmp >> 8);
>> + *oob++ = (u8)(tmp >> 16);
>> + *oob++ = (u8)(tmp >> 24);
>> + }
>> +
>> + for (i = 0; i < (ecc->steps / 2); i++) {
>> + bch_st = readl_relaxed(nfc->regs +
>> + nfc->cfg->bch_st_off + i * 4);
>> + if (bch_st & BIT(nfc->cfg->ecc0.err_flag_bit) ||
>> + bch_st & BIT(nfc->cfg->ecc1.err_flag_bit)) {
>> + mtd->ecc_stats.failed++;
>
>> + bitflips = 0;
>
> max_bitflips = -1;
>
> use max_bitflips only for the error warning, not as return value
>
>> + } else {
>
>> + ret = ECC_ERR_CNT(bch_st, nfc->cfg->ecc0);
>
> use ret only with "0" or official error codes, use cnt instead
>
> cnt = ECC_ERR_CNT(bch_st, nfc->cfg->ecc0);
>
>> + mtd->ecc_stats.corrected += ret;
> mtd->ecc_stats.corrected += cnt;
>
>> + bitflips = max_t(u32, bitflips, ret);
>
> bitflips = max_t(u32, bitflips, cnt);
>
>> +
>> + ret = ECC_ERR_CNT(bch_st, nfc->cfg->ecc1);
>
> cnt = ECC_ERR_CNT(bch_st, nfc->cfg->ecc1);
>
>> + mtd->ecc_stats.corrected += ret;
>
> mtd->ecc_stats.corrected += cnt;
>
>> + bitflips = max_t(u32, bitflips, ret);
>
> bitflips = max_t(u32, bitflips, cnt);
>> + }
>> + }
>> +out:
>> + memcpy(buf, nfc->page_buf, mtd->writesize);
>> +
>
>> + if (boot_rom_mode && rknand->boot_ecc != ecc->strength)
>> + rk_nfc_hw_ecc_setup(chip, ecc, ecc->strength);
>> +
>
>> + if (bitflips > ecc->strength)
>
> if (bitflips == -1) {
> ret = -EIO;
>
>> + dev_err(nfc->dev, "read page: %x ecc error!\n", page);
>
> }
>

>> +
>> + /*
>> + * Deselect the currently selected target after the ops is done
>> + * to reduce the power consumption.
>> + */
>> + rk_nfc_select_chip(chip, -1);


Remove.
Do not assume that the MTD framework or user space knows that you have
deselected the chip.

>> +
>
>> + return bitflips;
>
> return ret;
>
> Return only "0" or official error codes
> If you want to do a "bad block scan" function in user space analyse/use
> "mtd->ecc_stats" instead.
>
>> +}
>> +

\
 
 \ /
  Last update: 2020-10-31 14:46    [W:0.116 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site