lkml.org 
[lkml]   [2020]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] mtd: rawnand: stm32_fmc2: fix broken ECC
Hi Christophe,

Christophe Kerello <christophe.kerello@st.com> wrote on Fri, 30 Oct
2020 14:33:39 +0100:

> Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user
> input parsing bits"), ECC are broken in FMC2 driver in case of
> nand-ecc-step-size and nand-ecc-strength are not set in the device tree.
> To avoid this issue, the default settings are now set in
> stm32_fmc2_nfc_attach_chip function.
>
> Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
> Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
> ---
> Changes in v2:
> - move default ECC settings in stm32_fmc2_nfc_attach_chip function.
>
> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> index b31a581..550bda4 100644
> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> @@ -1708,6 +1708,13 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
> return -EINVAL;
> }
>
> + /* Default ECC settings in case they are not set in the device tree */
> + if (!chip->ecc.size)
> + chip->ecc.size = FMC2_ECC_STEP_SIZE;
> +
> + if (!chip->ecc.strength)
> + chip->ecc.strength = FMC2_ECC_BCH8;
> +
> ret = nand_ecc_choose_conf(chip, &stm32_fmc2_nfc_ecc_caps,
> mtd->oobsize - FMC2_BBM_LEN);
> if (ret) {
> @@ -1727,8 +1734,7 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
>
> mtd_set_ooblayout(mtd, &stm32_fmc2_nfc_ooblayout_ops);
>
> - if (chip->options & NAND_BUSWIDTH_16)
> - stm32_fmc2_nfc_set_buswidth_16(nfc, true);
> + stm32_fmc2_nfc_setup(chip);
>
> return 0;
> }
> @@ -1952,11 +1958,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
> chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE |
> NAND_USES_DMA;
>
> - /* Default ECC settings */
> - chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
> - chip->ecc.size = FMC2_ECC_STEP_SIZE;
> - chip->ecc.strength = FMC2_ECC_BCH8;
> -
> /* Scan to find existence of the device */
> ret = nand_scan(chip, nand->ncs);
> if (ret)

This overall looks very good to me, thanks for this update!

Cheers,
Miquèl

\
 
 \ /
  Last update: 2020-10-30 14:37    [W:0.475 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site