lkml.org 
[lkml]   [2020]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] dt-bindings: net: ftgmac100: describe phy-handle and MDIO
Date
Add the phy-handle and MDIO description and add the example with
PHY and MDIO nodes.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
.../devicetree/bindings/net/ftgmac100.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index f878c1103463..accb1b1e07b3 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -15,6 +15,7 @@ Required properties:
- interrupts: Should contain ethernet controller interrupt

Optional properties:
+- phy-handle: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory. If the property is
absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
aspeed parts. Other (unknown) parts will accept any value.
@@ -32,6 +33,9 @@ Optional properties:
- "MACCLK": The MAC IP clock
- "RCLK": Clock gate for the RMII RCLK

+Optional subnodes:
+- mdio: See mdio.txt file in the same directory.
+
Example:

mac0: ethernet@1e660000 {
@@ -40,3 +44,24 @@ Example:
interrupts = <2>;
use-ncsi;
};
+
+Example with phy-handle:
+
+ mac1: ethernet@1e680000 {
+ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ interrupts = <2>;
+
+ phy-handle = <&phy>;
+ phy-mode = "rgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+ };
--
2.21.1
\
 
 \ /
  Last update: 2020-10-30 14:33    [W:0.078 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site