lkml.org 
[lkml]   [2020]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 1/2] net: phy: realtek: Add phy ids for RTL8226-CG/RTL8226B-CG
From
Date
On 29.10.2020 14:37, Andrew Lunn wrote:
> On Thu, Oct 29, 2020 at 08:07:57PM +0800, Willy Liu wrote:
>> Realtek single-port 2.5Gbps Ethernet PHY ids as below:
>> RTL8226-CG: 0x001cc800(ES)/0x001cc838(MP)
>> RTL8226B-CG/RTL8221B-CG: 0x001cc840(ES)/0x001cc848(MP)
>> ES: engineer sample
>> MP: mass production
>>
>> Since above PHYs are already in mass production stage,
>> mass production id should be added.
>>
>> Signed-off-by: Willy Liu <willy.liu@realtek.com>
>> ---
>> drivers/net/phy/realtek.c | 18 ++++++++++++++----
>> 1 file changed, 14 insertions(+), 4 deletions(-)
>> mode change 100644 => 100755 drivers/net/phy/realtek.c
>>
>> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
>> old mode 100644
>> new mode 100755
>> index fb1db71..988f075
>> --- a/drivers/net/phy/realtek.c
>> +++ b/drivers/net/phy/realtek.c
>> @@ -57,6 +57,9 @@
>> #define RTLGEN_SPEED_MASK 0x0630
>>
>> #define RTL_GENERIC_PHYID 0x001cc800
>> +#define RTL_8226_MP_PHYID 0x001cc838
>> +#define RTL_8221B_ES_PHYID 0x001cc840
>> +#define RTL_8221B_MP_PHYID 0x001cc848
>>
>> MODULE_DESCRIPTION("Realtek PHY driver");
>> MODULE_AUTHOR("Johnson Leung");
>> @@ -533,10 +536,17 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
>>
>> static int rtl8226_match_phy_device(struct phy_device *phydev)
>> {
>> - return phydev->phy_id == RTL_GENERIC_PHYID &&
>> + return (phydev->phy_id == RTL_GENERIC_PHYID) ||
>> + (phydev->phy_id == RTL_8226_MP_PHYID) &&
>> rtlgen_supports_2_5gbps(phydev);
>
> Hi Willy
>
> If i understand the code correctly, this match function is used
> because the engineering sample did not use a proper ID? The mass
> production part does, so there is no need to make use of this
> hack. Please just list it as a normal PHY using PHY_ID_MATCH_EXACT().
>
Right. My understanding:
These PHY's exist as standalone chips and integrated with RTL8125 MAC.
IIRC for RTL8125A the integrated PHY reports RTL_GENERIC_PHYID, since
RTL8125B it reports the same PHYID as the standalone model.

\
 
 \ /
  Last update: 2020-10-29 14:49    [W:1.639 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site