lkml.org 
[lkml]   [2020]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] dt-bindings: drm/msm/gpu: Add cooling device support
Date
Add cooling device support to gpu. A cooling device is bound to a
thermal zone to allow thermal mitigation.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
Documentation/devicetree/bindings/display/msm/gpu.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 1af0ff1..090dcb3 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -39,6 +39,10 @@ Required properties:
a4xx Snapdragon SoCs. See
Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.

+Optional properties:
+- #cooling-cells: The value must be 2. For details, please refer
+ Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
+
Example 3xx/4xx:

/ {
@@ -61,6 +65,7 @@ Example 3xx/4xx:
power-domains = <&mmcc OXILICX_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
iommus = <&gpu_iommu 0>;
+ #cooling-cells = <2>;
};

gpu_sram: ocmem@fdd00000 {
@@ -98,6 +103,8 @@ Example a6xx (with GMU):
reg = <0x5000000 0x40000>, <0x509e000 0x10>;
reg-names = "kgsl_3d0_reg_memory", "cx_mem";

+ #cooling-cells = <2>;
+
/*
* Look ma, no clocks! The GPU clocks and power are
* controlled entirely by the GMU
--
2.7.4
\
 
 \ /
  Last update: 2020-10-29 09:10    [W:0.055 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site