lkml.org 
[lkml]   [2020]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/7] platform/chrome: cros_ec: Import Type C host commands
Date
Import the EC_CMD_TYPEC_STATUS and EC_CMD_TYPEC_DISCOVERY Chrome OS EC
host commands from the EC code base [1].

These commands can be used by the application processor to query Power
Delivery (PD) discovery information concerning connected Type C
peripherals.

Also add the EC_FEATURE_TYPEC_CMD feature flag, which is used to
determine whether these commands are supported by the EC.

[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h

Signed-off-by: Prashant Malani <pmalani@chromium.org>
---

Changes in v2:
- No changes.

.../linux/platform_data/cros_ec_commands.h | 155 ++++++++++++++++++
1 file changed, 155 insertions(+)

diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 1fcfe9e63cb9..7f54fdcdd8cb 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -1284,6 +1284,8 @@ enum ec_feature_code {
EC_FEATURE_SCP = 39,
/* The MCU is an Integrated Sensor Hub */
EC_FEATURE_ISH = 40,
+ /* New TCPMv2 TYPEC_ prefaced commands supported */
+ EC_FEATURE_TYPEC_CMD = 41,
};

#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
@@ -5528,6 +5530,159 @@ struct ec_response_regulator_get_voltage {
uint32_t voltage_mv;
} __ec_align4;

+/*
+ * Gather all discovery information for the given port and partner type.
+ *
+ * Note that if discovery has not yet completed, only the currently completed
+ * responses will be filled in. If the discovery data structures are changed
+ * in the process of the command running, BUSY will be returned.
+ *
+ * VDO field sizes are set to the maximum possible number of VDOs a VDM may
+ * contain, while the number of SVIDs here is selected to fit within the PROTO2
+ * maximum parameter size.
+ */
+#define EC_CMD_TYPEC_DISCOVERY 0x0131
+
+enum typec_partner_type {
+ TYPEC_PARTNER_SOP = 0,
+ TYPEC_PARTNER_SOP_PRIME = 1,
+};
+
+struct ec_params_typec_discovery {
+ uint8_t port;
+ uint8_t partner_type; /* enum typec_partner_type */
+} __ec_align1;
+
+struct svid_mode_info {
+ uint16_t svid;
+ uint16_t mode_count; /* Number of modes partner sent */
+ uint32_t mode_vdo[6]; /* Max VDOs allowed after VDM header is 6 */
+};
+
+struct ec_response_typec_discovery {
+ uint8_t identity_count; /* Number of identity VDOs partner sent */
+ uint8_t svid_count; /* Number of SVIDs partner sent */
+ uint16_t reserved;
+ uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */
+ struct svid_mode_info svids[0];
+} __ec_align1;
+
+/*
+ * Gather all status information for a port.
+ *
+ * Note: this covers many of the return fields from the deprecated
+ * EC_CMD_USB_PD_CONTROL command, except those that are redundant with the
+ * discovery data. The "enum pd_cc_states" is defined with the deprecated
+ * EC_CMD_USB_PD_CONTROL command.
+ *
+ * This also combines in the EC_CMD_USB_PD_MUX_INFO flags.
+ */
+#define EC_CMD_TYPEC_STATUS 0x0133
+
+/*
+ * Power role.
+ *
+ * Note this is also used for PD header creation, and values align to those in
+ * the Power Delivery Specification Revision 3.0 (See
+ * 6.2.1.1.4 Port Power Role).
+ */
+enum pd_power_role {
+ PD_ROLE_SINK = 0,
+ PD_ROLE_SOURCE = 1
+};
+
+/*
+ * Data role.
+ *
+ * Note this is also used for PD header creation, and the first two values
+ * align to those in the Power Delivery Specification Revision 3.0 (See
+ * 6.2.1.1.6 Port Data Role).
+ */
+enum pd_data_role {
+ PD_ROLE_UFP = 0,
+ PD_ROLE_DFP = 1,
+ PD_ROLE_DISCONNECTED = 2,
+};
+
+enum pd_vconn_role {
+ PD_ROLE_VCONN_OFF = 0,
+ PD_ROLE_VCONN_SRC = 1,
+};
+
+/*
+ * Note: BIT(0) may be used to determine whether the polarity is CC1 or CC2,
+ * regardless of whether a debug accessory is connected.
+ */
+enum tcpc_cc_polarity {
+ /*
+ * _CCx: is used to indicate the polarity while not connected to
+ * a Debug Accessory. Only one CC line will assert a resistor and
+ * the other will be open.
+ */
+ POLARITY_CC1 = 0,
+ POLARITY_CC2 = 1,
+
+ /*
+ * _CCx_DTS is used to indicate the polarity while connected to a
+ * SRC Debug Accessory. Assert resistors on both lines.
+ */
+ POLARITY_CC1_DTS = 2,
+ POLARITY_CC2_DTS = 3,
+
+ /*
+ * The current TCPC code relies on these specific POLARITY values.
+ * Adding in a check to verify if the list grows for any reason
+ * that this will give a hint that other places need to be
+ * adjusted.
+ */
+ POLARITY_COUNT
+};
+
+#define PD_STATUS_EVENT_SOP_DISC_DONE BIT(0)
+#define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE BIT(1)
+
+struct ec_params_typec_status {
+ uint8_t port;
+} __ec_align1;
+
+struct ec_response_typec_status {
+ uint8_t pd_enabled; /* PD communication enabled - bool */
+ uint8_t dev_connected; /* Device connected - bool */
+ uint8_t sop_connected; /* Device is SOP PD capable - bool */
+ uint8_t source_cap_count; /* Number of Source Cap PDOs */
+
+ uint8_t power_role; /* enum pd_power_role */
+ uint8_t data_role; /* enum pd_data_role */
+ uint8_t vconn_role; /* enum pd_vconn_role */
+ uint8_t sink_cap_count; /* Number of Sink Cap PDOs */
+
+ uint8_t polarity; /* enum tcpc_cc_polarity */
+ uint8_t cc_state; /* enum pd_cc_states */
+ uint8_t dp_pin; /* DP pin mode (MODE_DP_IN_[A-E]) */
+ uint8_t mux_state; /* USB_PD_MUX* - encoded mux state */
+
+ char tc_state[32]; /* TC state name */
+
+ uint32_t events; /* PD_STATUS_EVENT bitmask */
+
+ /*
+ * BCD PD revisions for partners
+ *
+ * The format has the PD major reversion in the upper nibble, and PD
+ * minor version in the next nibble. Following two nibbles are
+ * currently 0.
+ * ex. PD 3.2 would map to 0x3200
+ *
+ * PD major/minor will be 0 if no PD device is connected.
+ */
+ uint16_t sop_revision;
+ uint16_t sop_prime_revision;
+
+ uint32_t source_cap_pdos[7]; /* Max 7 PDOs can be present */
+
+ uint32_t sink_cap_pdos[7]; /* Max 7 PDOs can be present */
+} __ec_align1;
+
/*****************************************************************************/
/* The command range 0x200-0x2FF is reserved for Rotor. */

--
2.29.1.341.ge80a0c044ae-goog
\
 
 \ /
  Last update: 2020-10-29 23:28    [W:0.141 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site