lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
From
Subject[RFC PATCH 3/3] mwifiex: pcie: add reset_wsid quirk for Surface 3
Date
This commit adds reset_wsid quirk and uses this quirk for Surface 3 on
card reset.

To reset mwifiex on Surface 3, it seems that calling the _DSM method
exists in \_SB.WSID [1] device is required.

On Surface 3, calling the _DSM method removes/re-probes the card by
itself. So, need to place the reset function before performing FLR and
skip performing any other reset-related works.

Note that Surface Pro 3 also has the WSID device [2], but it seems to need
more work. This commit only supports Surface 3 yet.

[1] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_3/dsdt.dsl#L11947-L12011
[2] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_pro_3/dsdt.dsl#L12164-L12216

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
---
Current issues:
1) After reset with this quirk, ASPM settings don't get restored.

Below is the "sudo lspci -nnvvv" diff before/after fw reset on Surface 3:

#
# root port of wifi:
# 00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 20) (prog-if 00 [Normal decode])
#
@@ -103,7 +103,7 @@
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
#
# no changes on wifi regarding ASPM
#

As you see, the ASPM of wifi root port is disabled after fw reset (thus
breaks S0ix).

2) Creating a new device driver for the WSID device is better?

then export the reset function, and call it from mwifiex. As the comments
in code states, on S3, calling the _DSM methods immediately
remove/re-probe mwifiex. So, resetting the wifi externally is a better
idea? (Also in this way, hopefully supporting SP3 may become easier.)

drivers/net/wireless/marvell/mwifiex/pcie.c | 10 +++
.../wireless/marvell/mwifiex/pcie_quirks.c | 77 ++++++++++++++++++-
.../wireless/marvell/mwifiex/pcie_quirks.h | 5 ++
3 files changed, 91 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index c0c4b5a9149ab..b3aacd19cc48f 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -2966,6 +2966,16 @@ static void mwifiex_pcie_card_reset_work(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;

+ /* On Surface 3, reset_wsid method removes then re-probes card by
+ * itself. So, need to place it here and skip performing any other
+ * reset-related works.
+ */
+ if (card->quirks & QUIRK_FW_RST_WSID_S3) {
+ mwifiex_pcie_reset_wsid_quirk(card->dev);
+ /* skip performing any other reset-related works */
+ return;
+ }
+
/* We can't afford to wait here; remove() might be waiting on us. If we
* can't grab the device lock, maybe we'll get another chance later.
*/
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index edc739c542fea..f0a6fa0a7ae5f 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -9,10 +9,21 @@
* down, or causes NULL ptr deref).
*/

+#include <linux/acpi.h>
#include <linux/dmi.h>

#include "pcie_quirks.h"

+/* For reset_wsid quirk */
+#define ACPI_WSID_PATH "\\_SB.WSID"
+#define WSID_REV 0x0
+#define WSID_FUNC_WIFI_PWR_OFF 0x1
+#define WSID_FUNC_WIFI_PWR_ON 0x2
+/* WSID _DSM UUID: "534ea3bf-fcc2-4e7a-908f-a13978f0c7ef" */
+static const guid_t wsid_dsm_guid =
+ GUID_INIT(0x534ea3bf, 0xfcc2, 0x4e7a,
+ 0x90, 0x8f, 0xa1, 0x39, 0x78, 0xf0, 0xc7, 0xef);
+
/* quirk table based on DMI matching */
static const struct dmi_system_id mwifiex_quirk_table[] = {
{
@@ -87,7 +98,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_WSID_S3,
},
{
.ident = "Surface Pro 3",
@@ -113,6 +124,9 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
dev_info(&pdev->dev, "no quirks enabled\n");
if (card->quirks & QUIRK_FW_RST_D3COLD)
dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+ if (card->quirks & QUIRK_FW_RST_WSID_S3)
+ dev_info(&pdev->dev,
+ "quirk reset_wsid for Surface 3 enabled\n");
}

static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
@@ -169,3 +183,64 @@ int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)

return 0;
}
+
+int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev)
+{
+ acpi_handle handle;
+ union acpi_object *obj;
+ acpi_status status;
+
+ dev_info(&pdev->dev, "Using reset_wsid quirk to perform FW reset\n");
+
+ status = acpi_get_handle(NULL, ACPI_WSID_PATH, &handle);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&pdev->dev, "No ACPI handle for path %s\n",
+ ACPI_WSID_PATH);
+ return -ENODEV;
+ }
+
+ if (!acpi_has_method(handle, "_DSM")) {
+ dev_err(&pdev->dev, "_DSM method not found\n");
+ return -ENODEV;
+ }
+
+ if (!acpi_check_dsm(handle, &wsid_dsm_guid,
+ WSID_REV, WSID_FUNC_WIFI_PWR_OFF)) {
+ dev_err(&pdev->dev,
+ "_DSM method doesn't support wifi power off func\n");
+ return -ENODEV;
+ }
+
+ if (!acpi_check_dsm(handle, &wsid_dsm_guid,
+ WSID_REV, WSID_FUNC_WIFI_PWR_ON)) {
+ dev_err(&pdev->dev,
+ "_DSM method doesn't support wifi power on func\n");
+ return -ENODEV;
+ }
+
+ /* card will be removed immediately after this call on Surface 3 */
+ dev_info(&pdev->dev, "turning wifi off...\n");
+ obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid,
+ WSID_REV, WSID_FUNC_WIFI_PWR_OFF,
+ NULL);
+ if (!obj) {
+ dev_err(&pdev->dev,
+ "device _DSM execution failed for turning wifi off\n");
+ return -EIO;
+ }
+ ACPI_FREE(obj);
+
+ /* card will be re-probed immediately after this call on Surface 3 */
+ dev_info(&pdev->dev, "turning wifi on...\n");
+ obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid,
+ WSID_REV, WSID_FUNC_WIFI_PWR_ON,
+ NULL);
+ if (!obj) {
+ dev_err(&pdev->dev,
+ "device _DSM execution failed for turning wifi on\n");
+ return -EIO;
+ }
+ ACPI_FREE(obj);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 8b9dcb5070d87..3ef7440418e32 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -7,6 +7,11 @@

/* quirks */
#define QUIRK_FW_RST_D3COLD BIT(0)
+/* Surface 3 and Surface Pro 3 have the same _DSM method but need to
+ * be handled differently. Currently, only S3 is supported.
+ */
+#define QUIRK_FW_RST_WSID_S3 BIT(1)

void mwifiex_initialize_quirks(struct pcie_service_card *card);
int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
+int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev);
--
2.29.1
\
 
 \ /
  Last update: 2020-10-29 00:48    [W:0.055 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site