lkml.org 
[lkml]   [2020]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 4/6] i2c: iproc: fix typo in slave_isr function
On Fri, Oct 23, 2020 at 10:51 PM Ray Jui <ray.jui@broadcom.com> wrote:
>
>
>
> On 10/11/2020 11:22 AM, Rayagonda Kokatanur wrote:
> > Fix typo in bcm_iproc_i2c_slave_isr().
> >
> > Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
>
> This is merely a fix of typo in code comment and there's no functional
> impact. Why do we need a Fixes tag on this (which indicates the fix
> needs to be backported to LTS kernels)?

Thank you Ray.
I will remove Fixes tag and push patch v2.

Best regards,
Rayagonda

>
> > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > ---
> > drivers/i2c/busses/i2c-bcm-iproc.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
> > index cd687696bf0b..7a235f9f5884 100644
> > --- a/drivers/i2c/busses/i2c-bcm-iproc.c
> > +++ b/drivers/i2c/busses/i2c-bcm-iproc.c
> > @@ -382,7 +382,7 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
> > if (status & BIT(IS_S_START_BUSY_SHIFT)) {
> > i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value);
> > /*
> > - * Enable interrupt for TX FIFO becomes empty and
> > + * Disable interrupt for TX FIFO becomes empty and
> > * less than PKT_LENGTH bytes were output on the SMBUS
> > */
> > val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
> >
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2020-10-26 14:53    [W:0.128 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site