lkml.org 
[lkml]   [2020]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 11/24] iommu/io-pgtable-arm-v7s: Quad lvl1 pgtable for MediaTek
From
Date
On Fri, 2020-10-23 at 12:21 +0100, Will Deacon wrote:
> On Wed, Sep 30, 2020 at 03:06:34PM +0800, Yong Wu wrote:
> > The standard input iova bits is 32. MediaTek quad the lvl1 pagetable
> > (4 * lvl1). No change for lvl2 pagetable. Then the iova bits can reach
> > 34bit.
> >
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> > drivers/iommu/io-pgtable-arm-v7s.c | 13 ++++++++++---
> > drivers/iommu/mtk_iommu.c | 2 +-
> > 2 files changed, 11 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
> > index 8362fdf76657..306bae2755ed 100644
> > --- a/drivers/iommu/io-pgtable-arm-v7s.c
> > +++ b/drivers/iommu/io-pgtable-arm-v7s.c
> > @@ -50,10 +50,17 @@
> > */
> > #define ARM_V7S_ADDR_BITS 32
>
> If we rename this to _ARM_V7S_ADDR_BITS can we then have ARM_V7S_ADDR_BITS
> take a cfg parameter and move the arm_v7s_is_mtk_enabled() check in there?
> Same for _ARM_V7S_LVL_BITS.
>
> That would avoid scattering arm_v7s_is_mtk_enabled() into all the users.

I added "cfg" for _ARM_V7S_LVL_BITS in Robin's mail. is that ok?

Regarding ARM_V7S_ADDR_BITS, I'd like to keep it as is(Don't add cfg),
this macro only is used in ARM_V7S_LVL_SHIFT and checking the value of
ias/oas.

a) ARM_V7S_LVL_SHIFT always expect ARM_V7S_ADDR_BITS is 32.

b) our ias/oas is different(ias is 34 while oas is 35). If we define a
new macro, we need two about this, like:
#define ARM_V7S_IADDR_BITS(cfg) (!arm_v7s_is_mtk_enabled(cfg) ? 32 : 34)
#define ARM_V7S_OADDR_BITS(cfg) (!arm_v7s_is_mtk_enabled(cfg) ? 32 : 35)
and the two will only are used in the checking of ias/oas.

thus it looks unnecessary?

>
> Will

\
 
 \ /
  Last update: 2020-10-26 08:46    [W:0.069 / U:8.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site