lkml.org 
[lkml]   [2020]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] pinctrl: amd: print debounce filter info in debugfs
On Sat, Oct 24, 2020 at 2:32 PM Coiby Xu <coiby.xu@gmail.com> wrote:
>
> Print out the status of debounce filter as follows,
> $ cat /sys/kernel/debug/gpio|grep pin130
> pin130 interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state|
> disable wakeup in S4/S5 state| input is high| pull-up is disabled| Pull-down is disabled| output is disabled| debouncing filter (high) enabled| debouncing timeout is 124800 (us)| 0x503c8


> + if (!tmr_large) {
> + if (!tmr_out_unit)
> + unit = 61;
> + else
> + unit = 244;
> + } else {
> + if (!tmr_out_unit)
> + unit = 15600;
> + else
> + unit = 62500;
> + }

In all three if:s can you use positive conditionals?

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-10-25 18:13    [W:0.049 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site