Messages in this thread | | | From | Vincent Guittot <> | Date | Fri, 23 Oct 2020 12:43:33 +0200 | Subject | Re: [PATCH V2 1/2] sched/core: Rename and move schedutil_cpu_util() to core.c |
| |
On Fri, 23 Oct 2020 at 12:20, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > There is nothing schedutil specific in schedutil_cpu_util(), move it to > core.c and rename it to sched_cpu_util(), so it can be used from other
I wonder if pelt.c would be a better place for this than core.c ?
> parts of the kernel as well. > > The cpufreq_cooling stuff will make use of this in a later commit. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > include/linux/sched.h | 19 +++++ > kernel/sched/core.c | 113 ++++++++++++++++++++++++++++++ > kernel/sched/cpufreq_schedutil.c | 116 +------------------------------ > kernel/sched/fair.c | 6 +- > kernel/sched/sched.h | 29 +------- > 5 files changed, 140 insertions(+), 143 deletions(-) > > diff --git a/include/linux/sched.h b/include/linux/sched.h > index 393db0690101..3c27c10141cb 100644 > --- a/include/linux/sched.h > +++ b/include/linux/sched.h > @@ -1930,6 +1930,25 @@ extern long sched_getaffinity(pid_t pid, struct cpumask *mask); > #define TASK_SIZE_OF(tsk) TASK_SIZE > #endif > > +/** > + * enum cpu_util_type - CPU utilization type > + * @FREQUENCY_UTIL: Utilization used to select frequency > + * @ENERGY_UTIL: Utilization used during energy calculation > + * > + * The utilization signals of all scheduling classes (CFS/RT/DL) and IRQ time > + * need to be aggregated differently depending on the usage made of them. This > + * enum is used within sched_cpu_util() to differentiate the types of > + * utilization expected by the callers, and adjust the aggregation accordingly. > + */ > +enum cpu_util_type { > + FREQUENCY_UTIL, > + ENERGY_UTIL, > +}; > + > +/* Returns effective CPU utilization, as seen by the scheduler */ > +unsigned long sched_cpu_util(int cpu, enum cpu_util_type type, > + unsigned long max); > + > #ifdef CONFIG_RSEQ > > /* > diff --git a/kernel/sched/core.c b/kernel/sched/core.c > index d2003a7d5ab5..369ff54d11d4 100644 > --- a/kernel/sched/core.c > +++ b/kernel/sched/core.c > @@ -5117,6 +5117,119 @@ struct task_struct *idle_task(int cpu) > return cpu_rq(cpu)->idle; > } > > +/* > + * This function computes an effective utilization for the given CPU, to be > + * used for frequency selection given the linear relation: f = u * f_max. > + * > + * The scheduler tracks the following metrics: > + * > + * cpu_util_{cfs,rt,dl,irq}() > + * cpu_bw_dl() > + * > + * Where the cfs,rt and dl util numbers are tracked with the same metric and > + * synchronized windows and are thus directly comparable. > + * > + * The cfs,rt,dl utilization are the running times measured with rq->clock_task > + * which excludes things like IRQ and steal-time. These latter are then accrued > + * in the irq utilization. > + * > + * The DL bandwidth number otoh is not a measured metric but a value computed > + * based on the task model parameters and gives the minimal utilization > + * required to meet deadlines. > + */ > +unsigned long effective_cpu_util(int cpu, unsigned long util_cfs, > + unsigned long max, enum cpu_util_type type, > + struct task_struct *p) > +{ > + unsigned long dl_util, util, irq; > + struct rq *rq = cpu_rq(cpu); > + > + if (!uclamp_is_used() && > + type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { > + return max; > + } > + > + /* > + * Early check to see if IRQ/steal time saturates the CPU, can be > + * because of inaccuracies in how we track these -- see > + * update_irq_load_avg(). > + */ > + irq = cpu_util_irq(rq); > + if (unlikely(irq >= max)) > + return max; > + > + /* > + * Because the time spend on RT/DL tasks is visible as 'lost' time to > + * CFS tasks and we use the same metric to track the effective > + * utilization (PELT windows are synchronized) we can directly add them > + * to obtain the CPU's actual utilization. > + * > + * CFS and RT utilization can be boosted or capped, depending on > + * utilization clamp constraints requested by currently RUNNABLE > + * tasks. > + * When there are no CFS RUNNABLE tasks, clamps are released and > + * frequency will be gracefully reduced with the utilization decay. > + */ > + util = util_cfs + cpu_util_rt(rq); > + if (type == FREQUENCY_UTIL) > + util = uclamp_rq_util_with(rq, util, p); > + > + dl_util = cpu_util_dl(rq); > + > + /* > + * For frequency selection we do not make cpu_util_dl() a permanent part > + * of this sum because we want to use cpu_bw_dl() later on, but we need > + * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such > + * that we select f_max when there is no idle time. > + * > + * NOTE: numerical errors or stop class might cause us to not quite hit > + * saturation when we should -- something for later. > + */ > + if (util + dl_util >= max) > + return max; > + > + /* > + * OTOH, for energy computation we need the estimated running time, so > + * include util_dl and ignore dl_bw. > + */ > + if (type == ENERGY_UTIL) > + util += dl_util; > + > + /* > + * There is still idle time; further improve the number by using the > + * irq metric. Because IRQ/steal time is hidden from the task clock we > + * need to scale the task numbers: > + * > + * max - irq > + * U' = irq + --------- * U > + * max > + */ > + util = scale_irq_capacity(util, irq, max); > + util += irq; > + > + /* > + * Bandwidth required by DEADLINE must always be granted while, for > + * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism > + * to gracefully reduce the frequency when no tasks show up for longer > + * periods of time. > + * > + * Ideally we would like to set bw_dl as min/guaranteed freq and util + > + * bw_dl as requested freq. However, cpufreq is not yet ready for such > + * an interface. So, we only do the latter for now. > + */ > + if (type == FREQUENCY_UTIL) > + util += cpu_bw_dl(rq); > + > + return min(max, util); > +} > + > +unsigned long sched_cpu_util(int cpu, enum cpu_util_type type, > + unsigned long max) > +{ > + return effective_cpu_util(cpu, cpu_util_cfs(cpu_rq(cpu)), max, type, > + NULL); > +} > + > /** > * find_process_by_pid - find a process with a matching PID value. > * @pid: the pid in question. > diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c > index 5ae7b4e6e8d6..0c5c61a095f6 100644 > --- a/kernel/sched/cpufreq_schedutil.c > +++ b/kernel/sched/cpufreq_schedutil.c > @@ -169,122 +169,12 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy, > return cpufreq_driver_resolve_freq(policy, freq); > } > > -/* > - * This function computes an effective utilization for the given CPU, to be > - * used for frequency selection given the linear relation: f = u * f_max. > - * > - * The scheduler tracks the following metrics: > - * > - * cpu_util_{cfs,rt,dl,irq}() > - * cpu_bw_dl() > - * > - * Where the cfs,rt and dl util numbers are tracked with the same metric and > - * synchronized windows and are thus directly comparable. > - * > - * The cfs,rt,dl utilization are the running times measured with rq->clock_task > - * which excludes things like IRQ and steal-time. These latter are then accrued > - * in the irq utilization. > - * > - * The DL bandwidth number otoh is not a measured metric but a value computed > - * based on the task model parameters and gives the minimal utilization > - * required to meet deadlines. > - */ > -unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > - unsigned long max, enum schedutil_type type, > - struct task_struct *p) > -{ > - unsigned long dl_util, util, irq; > - struct rq *rq = cpu_rq(cpu); > - > - if (!uclamp_is_used() && > - type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { > - return max; > - } > - > - /* > - * Early check to see if IRQ/steal time saturates the CPU, can be > - * because of inaccuracies in how we track these -- see > - * update_irq_load_avg(). > - */ > - irq = cpu_util_irq(rq); > - if (unlikely(irq >= max)) > - return max; > - > - /* > - * Because the time spend on RT/DL tasks is visible as 'lost' time to > - * CFS tasks and we use the same metric to track the effective > - * utilization (PELT windows are synchronized) we can directly add them > - * to obtain the CPU's actual utilization. > - * > - * CFS and RT utilization can be boosted or capped, depending on > - * utilization clamp constraints requested by currently RUNNABLE > - * tasks. > - * When there are no CFS RUNNABLE tasks, clamps are released and > - * frequency will be gracefully reduced with the utilization decay. > - */ > - util = util_cfs + cpu_util_rt(rq); > - if (type == FREQUENCY_UTIL) > - util = uclamp_rq_util_with(rq, util, p); > - > - dl_util = cpu_util_dl(rq); > - > - /* > - * For frequency selection we do not make cpu_util_dl() a permanent part > - * of this sum because we want to use cpu_bw_dl() later on, but we need > - * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such > - * that we select f_max when there is no idle time. > - * > - * NOTE: numerical errors or stop class might cause us to not quite hit > - * saturation when we should -- something for later. > - */ > - if (util + dl_util >= max) > - return max; > - > - /* > - * OTOH, for energy computation we need the estimated running time, so > - * include util_dl and ignore dl_bw. > - */ > - if (type == ENERGY_UTIL) > - util += dl_util; > - > - /* > - * There is still idle time; further improve the number by using the > - * irq metric. Because IRQ/steal time is hidden from the task clock we > - * need to scale the task numbers: > - * > - * max - irq > - * U' = irq + --------- * U > - * max > - */ > - util = scale_irq_capacity(util, irq, max); > - util += irq; > - > - /* > - * Bandwidth required by DEADLINE must always be granted while, for > - * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism > - * to gracefully reduce the frequency when no tasks show up for longer > - * periods of time. > - * > - * Ideally we would like to set bw_dl as min/guaranteed freq and util + > - * bw_dl as requested freq. However, cpufreq is not yet ready for such > - * an interface. So, we only do the latter for now. > - */ > - if (type == FREQUENCY_UTIL) > - util += cpu_bw_dl(rq); > - > - return min(max, util); > -} > - > static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu) > { > - struct rq *rq = cpu_rq(sg_cpu->cpu); > - unsigned long util = cpu_util_cfs(rq); > - unsigned long max = arch_scale_cpu_capacity(sg_cpu->cpu); > - > - sg_cpu->max = max; > - sg_cpu->bw_dl = cpu_bw_dl(rq); > + sg_cpu->max = arch_scale_cpu_capacity(sg_cpu->cpu); > + sg_cpu->bw_dl = cpu_bw_dl(cpu_rq(sg_cpu->cpu)); > > - return schedutil_cpu_util(sg_cpu->cpu, util, max, FREQUENCY_UTIL, NULL); > + return sched_cpu_util(sg_cpu->cpu, FREQUENCY_UTIL, sg_cpu->max); > } > > /** > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c > index aa4c6227cd6d..52e2d866e875 100644 > --- a/kernel/sched/fair.c > +++ b/kernel/sched/fair.c > @@ -6499,7 +6499,7 @@ compute_energy(struct task_struct *p, int dst_cpu, struct perf_domain *pd) > * is already enough to scale the EM reported power > * consumption at the (eventually clamped) cpu_capacity. > */ > - sum_util += schedutil_cpu_util(cpu, util_cfs, cpu_cap, > + sum_util += effective_cpu_util(cpu, util_cfs, cpu_cap, > ENERGY_UTIL, NULL); > > /* > @@ -6509,7 +6509,7 @@ compute_energy(struct task_struct *p, int dst_cpu, struct perf_domain *pd) > * NOTE: in case RT tasks are running, by default the > * FREQUENCY_UTIL's utilization can be max OPP. > */ > - cpu_util = schedutil_cpu_util(cpu, util_cfs, cpu_cap, > + cpu_util = effective_cpu_util(cpu, util_cfs, cpu_cap, > FREQUENCY_UTIL, tsk); > max_util = max(max_util, cpu_util); > } > @@ -6607,7 +6607,7 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) > * IOW, placing the task there would make the CPU > * overutilized. Take uclamp into account to see how > * much capacity we can get out of the CPU; this is > - * aligned with schedutil_cpu_util(). > + * aligned with sched_cpu_util(). > */ > util = uclamp_rq_util_with(cpu_rq(cpu), util, p); > if (!fits_capacity(util, cpu_cap)) > diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h > index df80bfcea92e..0f0439344eec 100644 > --- a/kernel/sched/sched.h > +++ b/kernel/sched/sched.h > @@ -2486,25 +2486,8 @@ static inline unsigned long capacity_orig_of(int cpu) > } > #endif > > -/** > - * enum schedutil_type - CPU utilization type > - * @FREQUENCY_UTIL: Utilization used to select frequency > - * @ENERGY_UTIL: Utilization used during energy calculation > - * > - * The utilization signals of all scheduling classes (CFS/RT/DL) and IRQ time > - * need to be aggregated differently depending on the usage made of them. This > - * enum is used within schedutil_freq_util() to differentiate the types of > - * utilization expected by the callers, and adjust the aggregation accordingly. > - */ > -enum schedutil_type { > - FREQUENCY_UTIL, > - ENERGY_UTIL, > -}; > - > -#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL > - > -unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > - unsigned long max, enum schedutil_type type, > +unsigned long effective_cpu_util(int cpu, unsigned long util_cfs, > + unsigned long max, enum cpu_util_type type, > struct task_struct *p); > > static inline unsigned long cpu_bw_dl(struct rq *rq) > @@ -2533,14 +2516,6 @@ static inline unsigned long cpu_util_rt(struct rq *rq) > { > return READ_ONCE(rq->avg_rt.util_avg); > } > -#else /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ > -static inline unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > - unsigned long max, enum schedutil_type type, > - struct task_struct *p) > -{ > - return 0; > -} > -#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ > > #ifdef CONFIG_HAVE_SCHED_AVG_IRQ > static inline unsigned long cpu_util_irq(struct rq *rq) > -- > 2.25.0.rc1.19.g042ed3e048af >
| |