lkml.org 
[lkml]   [2020]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: imx8mm: Add GPU node
Date
According to the documentation from NXP, the i.MX8M Nano has a
Vivante GC7000 Ultra Lite as its GPU core.

With this patch, the Etnaviv driver presents the GPU as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203

It uses the GPCV2 controller to enable the power domain for the GPU.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
This patch depends on a series located:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=368903
and

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 605e6dbd2c6f..62c8cd3dea7c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
*/

#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1019,6 +1021,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};

+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
\
 
 \ /
  Last update: 2020-10-22 19:17    [W:0.062 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site