lkml.org 
[lkml]   [2020]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] scsi: ufs: make sure scan sequence for multiple hosts
Date
> > Did you mean /dev/disk/by-[part]label/ symlink? It's quite reasonable to
> > use them by udev in userspace such as initramfs but some cases does not
> use
> > initramfs or initrd. In that case, we need to load the root
> > device(/dev/sda[N]) directly from kernel.
>
> Please use udev or systemd instead of adding code in the UFS driver that
> is
> not necessary when udev or systemd is used.
>

What I mentioned was how it can be handled when we mount rootfs directly from kernel.

1) kernel -> initramfs (mount root) -> systemd
2) kernel (mount root) -> systemd
-> In this case, we normally use root=/dev/sda1 from kernel commandline to mount the rootfs.

Like fstab can support legacy node mount, ufs driver also needs to provide an option for using the permanent legacy node. If you're really worry about adding a new codes for all UFS driver, we can put this as controller specific or optional feature.

Best Regards,
Chanho Park

\
 
 \ /
  Last update: 2020-10-22 06:59    [W:0.103 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site