lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] RTC for 5.10
Hello Linus,

Here is the RTC pull request for 5.10. A new driver this cycle is making
the bulk of the changes and the rx8010 driver has been rework to use the
modern APIs.

The following changes since commit 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5:

Linux 5.9-rc1 (2020-08-16 13:04:57 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-5.10

for you to fetch changes up to 35331b506f6c67a0b4042fac1ae2785cef9ac8c3:

rtc: r9701: set range (2020-10-19 22:48:55 +0200)

----------------------------------------------------------------
RTC for 5.10

Subsystem:
- new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt

New driver:
- Microcrystal RV-3032

Drivers:
- ds1307: use aux-voltage-chargeable
- r9701, rx8010: modernization of the driver
- rv3028: fix clock output, trickle resistor values, RAM configuration
registers

----------------------------------------------------------------
Alexandre Belloni (13):
rtc: rv3028: fix clock output support
rtc: rv3028: fix trickle resistor values
rtc: rv3028: factorize EERD bit handling
rtc: rv3028: ensure ram configuration registers are saved
dt-bindings: rtc: add trickle-voltage-millivolt
dt-bindings: rtc: rv3032: add RV-3032 bindings
rtc: rv3032: Add a driver for Microcrystal RV-3032
rtc: r9701: remove leftover comment
rtc: r9701: stop setting a default time
rtc: r9701: remove useless memset
rtc: r9701: stop setting RWKCNT
rtc: r9701: convert to devm_rtc_allocate_device
rtc: r9701: set range

Bartosz Golaszewski (15):
rtc: rx8010: don't modify the global rtc ops
rtc: rx8010: remove a stray newline
rtc: rx8010: remove unnecessary brackets
rtc: rx8010: consolidate local variables of the same type
rtc: rx8010: use tabs instead of spaces for code formatting
rtc: rx8010: rename ret to err in rx8010_set_time()
rtc: rx8010: don't use magic values for time buffer length
rtc: rx8010: drop unnecessary initialization
rtc: rx8010: use a helper variable for client->dev in probe()
rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val)
rtc: rx8010: switch to using the preferred RTC API
rtc: rx8010: switch to using the preferred i2c API
rtc: rx8010: convert to using regmap
rtc: rx8010: use range checking provided by core RTC code
rtc: rx8010: rename rx8010_init_client() to rx8010_init()

Bastian Krause (8):
dt-bindings: rtc: let aux-voltage-chargeable supersede trickle-diode-disable
dt-bindings: rtc: ds1307: let aux-voltage-chargeable supersede trickle-diode-disable
dt-bindings: rtc: ds1307: add rx8130 aux-voltage-chargeable support
rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionally
rtc: ds1307: introduce requires_trickle_resistor per chip
rtc: ds1307: store previous charge default per chip
rtc: ds1307: consider aux-voltage-chargeable
rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally

Biwen Li (1):
rtc: pcf2127: fix a bug when not specify interrupts property

Chris Packham (2):
rtc: ds1307: Ensure oscillator is enabled for DS1388
rtc: ds1307: Clear OSF flag on DS1388 when setting time

Fei Shao (1):
rtc: mt6397: Remove unused member dev

Geert Uytterhoeven (3):
rtc: rtc-rs5c313: Drop obsolete platform_set_drvdata() call
rtc: rtc-rs5c313: Fix late hardware init
rtc: rtc-rs5c313: Convert to module_platform_driver()

Krzysztof Kozlowski (1):
rtc: s3c: Simplify with dev_err_probe()

Liu Shixin (2):
rtc: meson: simplify the return expression of meson_vrtc_probe
rtc: rv8803: simplify the return expression of rv8803_nvram_write

Peng Ma (1):
rtc: fsl-ftm-alarm: update acpi device id

Rikard Falkeborn (1):
rtc: st-lpc: Constify st_rtc_ops

Thomas Bogendoerfer (1):
rtc: ds1685: Fix bank switching to avoid endless loop

Victor Ding (1):
rtc: cmos: zero-init wkalrm when reading from CMOS

.../bindings/rtc/microcrystal,rv3032.yaml | 64 ++
.../devicetree/bindings/rtc/rtc-ds1307.txt | 9 +-
Documentation/devicetree/bindings/rtc/rtc.yaml | 16 +
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-cmos.c | 2 +
drivers/rtc/rtc-ds1307.c | 76 +-
drivers/rtc/rtc-ds1685.c | 8 +-
drivers/rtc/rtc-fsl-ftm-alarm.c | 4 +-
drivers/rtc/rtc-meson-vrtc.c | 7 +-
drivers/rtc/rtc-mt6397.c | 3 +-
drivers/rtc/rtc-pcf2127.c | 4 +-
drivers/rtc/rtc-r9701.c | 43 +-
drivers/rtc/rtc-rs5c313.c | 34 +-
drivers/rtc/rtc-rv3028.c | 213 +++--
drivers/rtc/rtc-rv3032.c | 925 +++++++++++++++++++++
drivers/rtc/rtc-rv8803.c | 8 +-
drivers/rtc/rtc-rx8010.c | 332 ++++----
drivers/rtc/rtc-s3c.c | 9 +-
drivers/rtc/rtc-st-lpc.c | 2 +-
include/linux/mfd/mt6397/rtc.h | 1 -
21 files changed, 1403 insertions(+), 368 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
create mode 100644 drivers/rtc/rtc-rv3032.c

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-10-21 10:23    [W:0.052 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site