lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v11 2/3] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
Hi, sorry for jumping into your discussion but I am trying to
summarize them to make sure we are on the same page. Pardon me to
manually copy-and-paste partial sentences to quote.

ACK:
- Don't expose DAI connections in compatible strings.
- Use "model" DT property to make the card more UCM2-friendly.
- Expose new DT properties to distinguish different DMIC models.

NACK:
- All the board variations using exactly the same compatible string.
=> This is less realistic. Although the CODECS information can be
retrieved from DT, it is inevitable to have some custom code for each
CODEC.

Per Mark's words:
> a different CODEC is something that often justifies a separate compatible
I think we should use different compatible strings for new CODECS
combinations. And we should try to reuse the machine driver if they
share the most code. In the worst case, introduce a new machine
driver for the new CODECS combinations.

- Srinivas's suggestion to set driver_name.
e.g. card->driver_name = "SM8250";
=> This sounds like a new DT property should be parsed in
sound/soc/qcom/common.c. For example: "qcom,family"? But as we do
less care about UCM2 for now, I would prefer to just leave it as is.


I would expect the following variants in DTS (just for example):

sound {
compatible = "qcom,sc7180-trogdor";
model = "sc7180-rt5682-max98357a-1mic";
}

sound {
compatible = "qcom,sc7180-trogdor";
model = "sc7180-rt5682-max98357a-2mic";
dmic-gpio = ...
}

sound {
compatible = "qcom,sc7180-pompom";
model = "sc7180-adau7002-max98357a";
}


Please correct me if there is any misunderstanding.

\
 
 \ /
  Last update: 2020-10-22 05:30    [W:0.191 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site