lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] usb: dwc3: Fix DRD mode change sequence following programming guide
Date
In reviewing the previous patch, Thinh Nguyen pointed out that
the DRD mode change sequence should be like the following when
switching from host -> device according to the programming guide
(for all DRD IPs):
1. Reset controller with GCTL.CoreSoftReset
2. Set GCTL.PrtCapDir(device)
3. Soft reset with DCTL.CSftRst
4. Then follow up with the initializing registers sequence

The current code does:
a. Soft reset with DCTL.CSftRst on driver probe
b. Reset controller with GCTL.CoreSoftReset (added in previous
patch)
c. Set GCTL.PrtCapDir(device)
d. < missing DCTL.CSftRst >
e. Then follow up with initializing registers sequence

So this patch adds the DCTL.CSftRst soft reset that was currently
missing from the dwc3 mode switching.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
Feedback would be appreciated. I'm a little worried I should be
conditionalizing the DCTL.CSftRst on DRD mode controllers, but
I'm really not sure what the right thing to do is for non-DRD
mode controllers.
---
drivers/usb/dwc3/core.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a2a88284a95b..c87d8add19e4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -40,6 +40,8 @@

#define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */

+static int dwc3_core_soft_reset(struct dwc3 *dwc);
+
/**
* dwc3_get_dr_mode - Validates and sets dr_mode
* @dwc: pointer to our context structure
@@ -177,6 +179,7 @@ static void __dwc3_set_mode(struct work_struct *work)

dwc3_set_prtcap(dwc, dwc->desired_dr_role);

+ dwc3_core_soft_reset(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);

switch (dwc->desired_dr_role) {
--
2.17.1
\
 
 \ /
  Last update: 2020-10-22 05:26    [W:0.051 / U:7.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site