lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] net: dsa: mv88e6xxx: serdes link without phy
Date
This small series gets my hardware into a working state. The key points are to
make sure we don't force the link and that we ask the MAC for the link status.
I also have updated my dts to say `phy-mode = "1000base-x";` and `managed =
"in-band-status";`

I've included patch #4 in this series but I don't have anything to test it on.
It's just a guess based on the datasheets. I'd suggest applying patch 1, 2 & 3
and leaving 4 for the mailing list archives.

Chris Packham (4):
net: dsa: mv88e6xxx: Don't force link when using in-band-status
net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185
net: dsa: mv88e6xxx: Handle error in serdes_get_regs
net: dsa: mv88e6xxx: Support serdes ports on MV88E6123/6131

drivers/net/dsa/mv88e6xxx/chip.c | 50 +++++++++++-
drivers/net/dsa/mv88e6xxx/chip.h | 4 +
drivers/net/dsa/mv88e6xxx/port.c | 36 +++++++++
drivers/net/dsa/mv88e6xxx/port.h | 3 +
drivers/net/dsa/mv88e6xxx/serdes.c | 122 +++++++++++++++++++++++++++--
drivers/net/dsa/mv88e6xxx/serdes.h | 9 +++
6 files changed, 217 insertions(+), 7 deletions(-)

--
2.28.0

\
 
 \ /
  Last update: 2020-10-22 03:26    [W:0.092 / U:2.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site