lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC,net-next, 0/4] seg6: add support for SRv6 End.DT4 behavior
Date
This patchset adds support for the SRv6 End.DT4 behavior.

The SRv6 End.DT4 is used to implement multi-tenant IPv4 L3VPN. It decapsulates
the received packets and performs IPv4 routing lookup in the routing table of
the tenant. The SRv6 End.DT4 Linux implementation leverages a VRF device. SRv6
End.DT4 is defined in the SRv6 Network Programming [1].

- Patch 1/4 is needed to solve a pre-existing issue with tunneled packets
when a sniffer is attached;

- Patch 2/4 introduces two callbacks used for customizing the
creation/destruction of a SRv6 behavior;

- Patch 3/4 is the core patch that adds support for the SRv6 End.DT4 behavior;

- Patch 4/4 adds the selftest for SRv6 End.DT4.

I would like to thank David Ahern for his support during the development of
this patch set.

Comments, suggestions and improvements are very welcome!

Thanks,
Andrea Mayer

[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming

Andrea Mayer (4):
vrf: push mac header for tunneled packets when sniffer is attached
seg6: add callbacks for customizing the creation/destruction of a
behavior
seg6: add support for the SRv6 End.DT4 behavior
add selftest for the SRv6 End.DT4 behavior

drivers/net/vrf.c | 78 ++-
net/ipv6/seg6_local.c | 261 ++++++++++
.../selftests/net/srv6_end_dt4_l3vpn_test.sh | 490 ++++++++++++++++++
3 files changed, 823 insertions(+), 6 deletions(-)
create mode 100755 tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh

--
2.20.1

\
 
 \ /
  Last update: 2020-10-21 20:50    [W:0.047 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site