lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
Date
The stm32mp1 TAMP (Tamper and backup registers) does tamper detection
and features 32 backup registers that, being in the RTC domain, may
survive even with Vdd switched off.

This makes it suitable for use to communicate a reboot mode from OS
to bootloader via the syscon-reboot-mode binding. Add a "simple-mfd"
to support probing such a child node. The actual reboot mode
node could then be defined in a board.dts or fixed up by the bootloader.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 available here:
https://lore.kernel.org/linux-arm-kernel/20200916142216.25142-1-a.fatoum@pengutronix.de/

v1 -> v2:
- new patch, rebased on top of
https://lore.kernel.org/r/20201014125441.2457-1-arnaud.pouliquen@st.com
---
.../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 6634b3e0853e..4684017a42e4 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -19,8 +19,11 @@ properties:
- st,stm32mp151-pwr-mcu
- st,stm32-syscfg
- st,stm32-power-config
- - st,stm32-tamp
- const: syscon
+ - items:
+ - const: st,stm32-tamp
+ - const: syscon
+ - const: simple-mfd

reg:
maxItems: 1
--
2.28.0
\
 
 \ /
  Last update: 2020-10-21 12:35    [W:0.125 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site