lkml.org 
[lkml]   [2020]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH net-next 1/9] dt-bindings: net: dsa: convert ksz bindings document to yaml
Date
On Wednesday, 21 October 2020, 08:52:01 CEST, Kurt Kanzenbach wrote:
> On Mon Oct 19 2020, Christian Eggers wrote:
> > Convert the bindings document for Microchip KSZ Series Ethernet switches
> > from txt to yaml.
>
> A few comments/questions below.
>
> > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> > b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml new file
> > mode 100644
> > index 000000000000..f93c3bdd0b83
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
>
> Currently the bindings don't have the company names in front of it.
All current bindings are in .txt format. In other subsystems (like iio),
company names have been added when converting to yaml.

> > @@ -0,0 +1,147 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Microchip KSZ Series Ethernet switches
> > +
> > +maintainers:
> > + - Marek Vasut <marex@denx.de>
> > + - Woojung Huh <Woojung.Huh@microchip.com>
> > +
> > +properties:
> > + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of
> > additional + # required and optional properties.
>
> Don't you need to reference the dsa.yaml binding somehow?
I should have taken a look into your binding beforehand...
allOf:
- $ref: dsa.yaml#

> > ...
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
> > + eth0 {
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + };
> > + };
> > +
> > + spi0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pinctrl-0 = <&pinctrl_spi_ksz>;
> > + cs-gpios = <&pioC 25 0>;
> > + id = <1>;
> > +
> > + ksz9477: ksz9477@0 {
>
> The node names should be switch. See dsa.yaml.
changed

>
> > + compatible = "microchip,ksz9477";
> > + reg = <0>;
> > + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> > +
> > + spi-max-frequency = <44000000>;
> > + spi-cpha;
> > + spi-cpol;
> > +
> > + ports {
>
> ethernet-ports are preferred.
"ports" is also used in the existing driver code (ksz_switch_register()).
Would like to keep it for now, probably I can be changed later.

>
> Thanks,
> Kurt

Below the current version for the version of the patch series.

Best regards
Christian


# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip KSZ Series Ethernet switches

allOf:
- $ref: dsa.yaml#

maintainers:
- Marek Vasut <marex@denx.de>
- Woojung Huh <Woojung.Huh@microchip.com>

properties:
# See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
# required and optional properties.
compatible:
enum:
- "microchip,ksz8765"
- "microchip,ksz8794"
- "microchip,ksz8795"
- "microchip,ksz9477"
- "microchip,ksz9897"
- "microchip,ksz9896"
- "microchip,ksz9567"
- "microchip,ksz8565"
- "microchip,ksz9893"
- "microchip,ksz9563"
- "microchip,ksz8563"

reset-gpios:
description:
Should be a gpio specifier for a reset line.
maxItems: 1

microchip,synclko-125:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.

required:
- compatible
- reg

examples:
- |
#include <dt-bindings/gpio/gpio.h>

// Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0 {
fixed-link {
speed = <1000>;
full-duplex;
};
};

spi0 {
#address-cells = <1>;
#size-cells = <0>;

pinctrl-0 = <&pinctrl_spi_ksz>;
cs-gpios = <&pioC 25 0>;
id = <1>;

ksz9477: switch@0 {
compatible = "microchip,ksz9477";
reg = <0>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;

spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;

ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "lan5";
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};

ksz8565: switch@1 {
compatible = "microchip,ksz8565";
reg = <1>;

spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;

ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
...







\
 
 \ /
  Last update: 2020-10-21 10:48    [W:0.099 / U:1.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site