lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [net-next PATCH v1 3/7] net: phy: Introduce fwnode_get_phy_id()
From
Date


On 10/2/2020 4:05 AM, Grant Likely wrote:
>
>
> On 30/09/2020 17:04, Calvin Johnson wrote:
>> Extract phy_id from compatible string. This will be used by
>> fwnode_mdiobus_register_phy() to create phy device using the
>> phy_id.
>>
>> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
>> ---
>>
>>   drivers/net/phy/phy_device.c | 32 +++++++++++++++++++++++++++++++-
>>   include/linux/phy.h          |  5 +++++
>>   2 files changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index c4aec56d0a95..162abde6223d 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -9,6 +9,7 @@
>>   #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +#include <linux/acpi.h>
>>   #include <linux/bitmap.h>
>>   #include <linux/delay.h>
>>   #include <linux/errno.h>
>> @@ -845,6 +846,27 @@ static int get_phy_c22_id(struct mii_bus *bus,
>> int addr, u32 *phy_id)
>>       return 0;
>>   }
>> +/* Extract the phy ID from the compatible string of the form
>> + * ethernet-phy-idAAAA.BBBB.
>> + */
>> +int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
>> +{
>> +    unsigned int upper, lower;
>> +    const char *cp;
>> +    int ret;
>> +
>> +    ret = fwnode_property_read_string(fwnode, "compatible", &cp);
>> +    if (ret)
>> +        return ret;
>> +
>> +    if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
>> +        *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
>> +        return 0;
>> +    }
>> +    return -EINVAL;
>> +}
>> +EXPORT_SYMBOL(fwnode_get_phy_id);
>
> This block, and the changes in patch 4 duplicate functions from
> drivers/of/of_mdio.c, but it doesn't refactor anything in
> drivers/of/of_mdio.c to use the new path. Is your intent to bring all of
> the parsing in these functions of "compatible" into the ACPI code path?
>
> If so, then the existing code path needs to be refactored to work with
> fwnode_handle instead of device_node.
>
> If not, then the DT path in these functions should call out to of_mdio,
> while the ACPI path only does what is necessary.

Rob has been asking before to have drivers/of/of_mdio.c be merged or at
least relocated within drivers/net/phy where it would naturally belong.
As a preliminary step towards ACPI support that would seem reasonable to do.

Then, as Grant suggests you can start re-factoring as much as possible
with using fwnode_handle.
--
Florian

\
 
 \ /
  Last update: 2020-10-02 17:15    [W:0.147 / U:2.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site