lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v2 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board
    From
    Date
    Hi Kevin,

    On 17/09/2020 08:59, Neil Armstrong wrote:
    > The Amlogic AXG is close to the GXL Glue but with a single OTG PHY.
    >
    > It needs the same init sequence as GXL & GXM, but it seems it doesn't need
    > the host disconnect bit.
    >
    > The Glue driver reuses the already implemented GXL & GXM work.
    >
    > The USB2 PHY driver needs a slight tweak to keep the OTG detection working.
    >
    > Changes since v1 at [1]:
    > - s/close from/close to/g
    > - collected review tags
    > - added small comment about phy management in patch 3
    > - removed status = "okay" in patch 4
    > - removed invalid phy-supply of phy1 in patch 5
    >
    > [1] http://lore.kernel.org/r/20200909160409.8678-1-narmstrong@baylibre.com
    >
    > Neil Armstrong (5):
    > phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
    > dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG
    > Families USB Glue Bindings
    > usb: dwc-meson-g12a: Add support for USB on AXG SoCs
    > arm64: dts: meson-axg: add USB nodes
    > arm64: dts: meson-axg-s400: enable USB OTG

    Can you pick the DT patches ?

    Thanks,
    Neil

    >
    > .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 +++++++-
    > .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 6 +++
    > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 +++++++++++++++++++
    > drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +-
    > drivers/usb/dwc3/dwc3-meson-g12a.c | 18 +++++++
    > 5 files changed, 97 insertions(+), 2 deletions(-)
    >

    \
     
     \ /
      Last update: 2020-10-02 14:45    [W:2.523 / U:0.228 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site