lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 02/24] dt-bindings: memory: mediatek: Convert SMI to DT schema
On Wed, Sep 30, 2020 at 03:06:25PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.txt | 49 ---------
> .../mediatek,smi-common.yaml | 100 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 49 ---------
> .../memory-controllers/mediatek,smi-larb.yaml | 91 ++++++++++++++++
> 4 files changed, 191 insertions(+), 98 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index b64573680b42..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..76ecc7205438
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, here is the list which
> + require gals: mt6779 and mt8183.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + oneOf:
> + - items:
> + - const: apb
> + - const: smi
> + - items:
> + - const: apb
> + - const: smi
> + - const: async
> + - items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1

Similarly to my comment to other properties, this requirement per
compatible should be part of the schema within 'if-then'.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-10-02 13:09    [W:0.306 / U:5.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site