lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 0/8] net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
On Fri, 2 Oct 2020 12:56:43 +0300 Grygorii Strashko wrote:
> On 02/10/2020 02:08, Jakub Kicinski wrote:
> > On Thu, 1 Oct 2020 13:52:50 +0300 Grygorii Strashko wrote:
> >> This series adds multi-port support in mac-only mode (multi MAC mode) to TI
> >> AM65x CPSW driver in preparation for enabling support for multi-port devices,
> >> like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
> >>
> >> The multi MAC mode is implemented by configuring every enabled port in "mac-only"
> >> mode (all ingress packets are sent only to the Host port and egress packets
> >> directed to target Ext. Port) and creating separate net_device for
> >> every enabled Ext. port.
> >
> > Do I get it right that you select the mode based on platform? Can the
> > other mode still be supported on these platforms?
> >
> > Is this a transition to normal DSA mode where ports always have netdevs?
>
> The idea here is to start in multi mac mode by default, as we still
> have pretty high demand for this. Then, and we are working on it, the
> switchdev mode is going to be introduces (not DSA). The switch
> between modes will happen by using devlink option - the approach is
> similar to what was used for Sitara CPSW cpsw_new.c driver [1].

What's unclear from the patches is whether the default configuration
for already supported platforms will change?

All the patches sound like they are "in preparation for support of K3
J721E" etc. So this is just code restructuring with no user-visible
changes?

\
 
 \ /
  Last update: 2020-10-03 01:04    [W:0.062 / U:2.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site