Messages in this thread | | | From | Chris Packham <> | Subject | [PATCH v3 0/3] net: dsa: mv88e6xxx: serdes link without phy | Date | Tue, 20 Oct 2020 16:45:55 +1300 |
| |
This small series gets my hardware into a working state. The key points are to make sure we don't force the link and that we ask the MAC for the link status. I also have updated my dts to say `phy-mode = "1000base-x";` and `managed = "in-band-status";`
I've included patch #3 in this series but I don't have anything to test it on. It's just a guess based on the datasheets. I'd suggest applying patch 1 & 2 and leaving 3 for the mailing list archives.
Chris Packham (3): net: dsa: mv88e6xxx: Don't force link when using in-band-status net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185 net: dsa: mv88e6xxx: Support serdes ports on MV88E6123/6131
drivers/net/dsa/mv88e6xxx/chip.c | 26 ++++++- drivers/net/dsa/mv88e6xxx/serdes.c | 106 +++++++++++++++++++++++++++++ drivers/net/dsa/mv88e6xxx/serdes.h | 9 +++ 3 files changed, 139 insertions(+), 2 deletions(-)
-- 2.28.0
| |