lkml.org 
[lkml]   [2020]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] usb: dwc3: core: fix a issue about clear connect state
Date
According to Synopsys Programming Guide chapter 2.2 Register Resets,
it cannot reset the DCTL register by set DCTL.CSFTRST for Core Soft Reset,
if DWC3 controller as a slave device and stay connected with a usb host,
then, reboot linux, it will fail to reinitialize dwc3 as a slave device
when the DWC3 controller did not power off. because the connection status
is incorrect, so we also need clear DCTL.RUN_STOP bit for disable connect
when do core soft reset.

Fixes: f59dcab176293b6 ("usb: dwc3: core: improve reset sequence")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
drivers/usb/dwc3/core.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2eb34c8b4065..239636c454c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -256,6 +256,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)

reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg |= DWC3_DCTL_CSFTRST;
+ reg &= ~DWC3_DCTL_RUN_STOP;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);

/*
--
2.25.0
\
 
 \ /
  Last update: 2020-10-18 15:48    [W:0.062 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site