lkml.org 
[lkml]   [2020]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3] Add support for mv88e6393x family of Marvell.
> +static void mv88e6393x_phylink_validate(struct mv88e6xxx_chip *chip, int port,
> + unsigned long *mask,
> + struct phylink_link_state *state)
> +{
> + if (port == 0 || port >= 9) {
> + phylink_set(mask, 10000baseT_Full);
> + phylink_set(mask, 10000baseKR_Full);
> + phylink_set(mask, 2500baseX_Full);
> + phylink_set(mask, 2500baseT_Full);
> + }
> +
> + phylink_set(mask, 1000baseT_Full);
> + phylink_set(mask, 1000baseX_Full);
> +
> + mv88e6065_phylink_validate(chip, port, mask, state);
> +}
> +
> static void mv88e6xxx_validate(struct dsa_switch *ds, int port,
> unsigned long *supported,
> struct phylink_link_state *state)
> @@ -4141,6 +4158,56 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
> .phylink_validate = mv88e6390_phylink_validate,
> };
>
> +static const struct mv88e6xxx_ops mv88e6193x_ops = {
> + /* MV88E6XXX_FAMILY_6393X */

Please add support for the 6393X and the 6391X. Most of the
differences are in mv88e6X93x_phylink_validate() functions, given the
different number of multiG ports. Just a best effort, since i guess
you do not have the hardware to test on.

> diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
> index 823ae89e5fca..407d683c0fcf 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.h
> +++ b/drivers/net/dsa/mv88e6xxx/chip.h
> @@ -63,6 +63,7 @@ enum mv88e6xxx_model {
> MV88E6190,
> MV88E6190X,
> MV88E6191,
> + MV88E6193X,
> MV88E6220,
> MV88E6240,
> MV88E6250,
> @@ -90,6 +91,7 @@ enum mv88e6xxx_family {
> MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
> MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
> MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */
> + MV88E6XXX_FAMILY_6393X, /* 6191X 6193X 6393X */
> };

Are there any 6393 devices, i.e. not X? I just wondering if we want to
call the family plain 6393? In general, it would be nicer to use the
name 6393, not 6393X.

> +int mv88e6393x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
> + phy_interface_t mode)
> +{
> + if (lane >= 0) {
> + if (chip->ports[port].serdes_irq) {
> + err = mv88e6393x_serdes_irq_enable(chip, port, lane, false);
> + if (err)
> + return err;
> + }
> +
> + err = mv88e6393x_serdes_power(chip, port, lane, false);
> + if (err)
> + return err;
> + }

Something wrong with the indentation here.

Please can you also look at trying to refactor
mv88e6xxx_port_set_cmode() so you don't have to duplicate so much.

> +/* Offset 0x0E: Policy & MGMT Control Register for FAMILY 6191X 6193X 6393X*/
> +
> +static int mv88e6393x_port_policy_write(struct mv88e6xxx_chip *chip, u16 pointer,
> + u8 data)
> +{
> + u16 reg;
> + int port;
> + int err = 0;

Reverse Christmas tree please, here and everywhere.
> +static int mv88e6393x_epc_wait_ready(struct mv88e6xxx_chip *chip, int port)
> +{
> + const unsigned long timeout = jiffies + 1 * HZ;
> + u16 val;
> + int err;
> +
> + while (time_before(jiffies, timeout)) {
> + err = mv88e6xxx_port_read(chip, port, MV88E6393X_PORT_EPC_CMD, &val);
> + if (err)
> + return err;
> + if (!(val & MV88E6393X_PORT_EPC_CMD_BUSY))
> + break;
> + usleep_range(1000, 2000);
> + }
> +
> + if (time_after(jiffies, timeout))
> + return -ETIMEDOUT;
> +
> + return 0;
> +}

Please build something on top of mv88e6xxx_wait_bit(). Look at
global1.c as an example for its _wait_ functions.

> +/* Return the SERDES lane address a port is using. Only Ports 0, 9 and 10
> + * have SERDES lanes. Returns -ENODEV if a port does not have a lane.
> + */
> +u8 mv88e6393x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
> +{
> + u8 cmode = chip->ports[port].cmode;
> +
> + switch (port) {
> + case 0:
> + if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_10GBASER)
> + return MV88E6393X_PORT0_LANE;
> + return ENODEV;

Missing the - in -ENODEV.

> + case 9:
> + if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_10GBASER)
> + return MV88E6393X_PORT9_LANE;
> + return ENODEV;
> + case 10:
> + if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
> + cmode == MV88E6XXX_PORT_STS_CMODE_10GBASER)
> + return MV88E6393X_PORT10_LANE;
> + return ENODEV;
> + default:
> + return ENODEV;
> + }
> +}
> +

Andrew

\
 
 \ /
  Last update: 2020-10-17 21:31    [W:0.147 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site