lkml.org 
[lkml]   [2020]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH RFC] mhi: Enable unique QRTR node ID support
Date
On multi-mhi platforms, host WiFi driver and
QMI test driver needs to differntiate between
QMI packets received from multiple mhi devices.

With QCN9000 PCI cards, once SBL gets loaded, we
utilize ERRDBG2 register to write a unique value
per mhi device from device-tree that the device
utilizes to set a unique QRTR node ID and
instance ID for the QMI service. This helps QRTR
stack in differenting the packets in a multi-mhi
environment and can route them accordingly.

sample:
root@OpenWrt:/# qrtr-lookup
Service Version Instance Node Port
69 1 40 40 2 ATH10k WLAN firmware service
15 1 0 40 1 Test service
69 1 39 39 2 ATH10k WLAN firmware service
15 1 0 39 1 Test service

Here on column 4, 39 and 40 are the node IDs that
is unique per mhi device.

Gokul Sriram Palanisamy (1):
bus: mhi: core: Enable unique QRTR node ID support

.../devicetree/bindings/mhi/qcom,mhi.yaml | 36 ++++++++++++++++++++++
drivers/bus/mhi/core/boot.c | 14 +++++++++
2 files changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mhi/qcom,mhi.yaml

--
2.7.4

\
 
 \ /
  Last update: 2020-10-16 21:05    [W:0.039 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site