lkml.org 
[lkml]   [2020]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: pinctrl: qcom: Add sc7280 pinctrl bindings
Date
Add device tree binding Documentation details for Qualcomm SC7280
TLMM block.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
.../bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 170 +++++++++++++++++++++
1 file changed, 170 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
new file mode 100644
index 0000000..971cfaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC7280 TLMM block
+
+maintainers:
+ - Rajendra Nayak <rnayak@codeaurora.org>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ SC7280 platform.
+
+properties:
+ compatible:
+ const: qcom,sc7280-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-4])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_char0, atest_char1, atest_char2,
+ atest_char3, atest_usb0, atest_usb00, atest_usb01,
+ atest_usb02, atest_usb03, atest_usb1, atest_usb10,
+ atest_usb11, atest_usb12, atest_usb13, audio_ref,
+ cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
+ cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
+ cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
+ dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
+ mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+ mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+ mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
+ mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
+ mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
+ mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
+ pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag0,
+ phase_flag1, phase_flag10, phase_flag11, phase_flag12,
+ phase_flag13, phase_flag14, phase_flag15, phase_flag16,
+ phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+ phase_flag20, phase_flag21, phase_flag22, phase_flag23,
+ phase_flag24, phase_flag25, phase_flag26, phase_flag27,
+ phase_flag28, phase_flag29, phase_flag3, phase_flag30,
+ phase_flag31, phase_flag4, phase_flag5, phase_flag6,
+ phase_flag7, phase_flag8, phase_flag9, pll_bist,
+ pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
+ qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10,
+ qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+ qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
+ qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+ qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
+ qlink1_request, qlink1_wmss, qspi_clk, qspi_cs, qspi_data,
+ qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
+ qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+ sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
+ sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
+ tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
+ usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f000000 {
+ compatible = "qcom,sc7280-pinctrl";
+ reg = <0xf000000 0x1000000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 175>;
+ wakeup-parent = <&pdc>;
+
+ qup_uart5_default: qup-uart5-pins {
+ pins = "gpio46", "gpio47";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2020-10-16 09:00    [W:0.069 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site