lkml.org 
[lkml]   [2020]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
Date
>>>>> "Sagar" == Sagar Shrikant Kadam <sagar.kadam@sifive.com> writes:

> The FU540-C000 has a broken IRQ and support was added earlier
> so that it will operate in polling mode, but seems to work only
> in case interrupts property is missing from the i2c0 dt-node.
> This should not be the case and the driver should handle polling
> mode with the interrupt property present in i2c0 node of the
> device tree.
> So check if it's the FU540-C000 soc and enable polling mode master
> xfers, as the IRQ for this chip is broken.

> Fixes commit c45d4ba86731 ("i2c: ocores: add polling mode workaround
> for Sifive FU540-C000 SoC")

> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> ---
> drivers/i2c/busses/i2c-ocores.c | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)

> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index f5fc75b..1dab02d 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -686,17 +686,21 @@ static int ocores_i2c_probe(struct platform_device *pdev)

> init_waitqueue_head(&i2c->wait);

> + /*
> + * Set OCORES_FLAG_BROKEN_IRQ to enable workaround for
> + * FU540-C000 SoC in polling mode.
> + * Since the SoC does have interrupt its dt has the interrupt
> + * defined but it should be bypassed in driver as this SoC has

NIT: Looks like there some commas missing and the wording sounds a bit
odd to me. What about E.G.:

/*
* Since the SoC does have an interrupt, its DT has an interrupt
* property - But this should be bypassed as the IRQ logic in this
* SoC is broken.
*/

> + * a broken IRQ, hence update the master_xfer to use polling
> + * transfers.
> + */
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "sifive,fu540-c000-i2c"))
> + i2c->flags |= OCORES_FLAG_BROKEN_IRQ;
> +
> irq = platform_get_irq(pdev, 0);
> - if (irq == -ENXIO) {
> + if (i2c->flags & OCORES_FLAG_BROKEN_IRQ || irq == -ENXIO) {


Alternatively you can move it after the irq = platform_get_irq(pdev, 0)
line and just clear irq, E.G.:

irq = platform_get_irq(pdev, 0);

if (of_device_is_compatible(..)) {
i2c->flags |= OCORES_FLAG_BROKEN_IRQ;
irq = -ENXIO;
}

if (irq == -ENXIO) {
..

--
Bye, Peter Korsgaard

\
 
 \ /
  Last update: 2020-10-15 16:51    [W:0.059 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site