lkml.org 
[lkml]   [2020]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: fw_devlink on will break all snps,dw-apb-gpio users
On Thu, Oct 15, 2020 at 1:15 AM Jisheng Zhang
<Jisheng.Zhang@synaptics.com> wrote:
>
> On Wed, 14 Oct 2020 22:04:24 -0700 Saravana Kannan wrote:
>
> >
> >
> > On Wed, Oct 14, 2020 at 9:02 PM Jisheng Zhang
> > <Jisheng.Zhang@synaptics.com> wrote:
> > >
> > > On Wed, 14 Oct 2020 10:29:36 -0700
> > > Saravana Kannan <saravanak@google.com> wrote:
> > >
> > > >
> > > >
> > > > On Wed, Oct 14, 2020 at 4:12 AM Jisheng Zhang
> > > > <Jisheng.Zhang@synaptics.com> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > If set fw_devlink as on, any consumers of dw apb gpio won't probe.
> > > > >
> > > > > The related dts looks like:
> > > > >
> > > > > gpio0: gpio@2400 {
> > > > > compatible = "snps,dw-apb-gpio";
> > > > > #address-cells = <1>;
> > > > > #size-cells = <0>;
> > > > >
> > > > > porta: gpio-port@0 {
> > > > > compatible = "snps,dw-apb-gpio-port";
> > > > > gpio-controller;
> > > > > #gpio-cells = <2>;
> > > > > ngpios = <32>;
> > > > > reg = <0>;
> > > > > };
> > > > > };
> > > > >
> > > > > device_foo {
> > > > > status = "okay"
> > > > > ...;
> > > > > reset-gpio = <&porta, 0, GPIO_ACTIVE_HIGH>;
> > > > > };
> > > > >
> > > > > If I change the reset-gpio property to use another kind of gpio phandle,
> > > > > e.g gpio expander, then device_foo can be probed successfully.
> > > > >
> > > > > The gpio expander dt node looks like:
> > > > >
> > > > > expander3: gpio@44 {
> > > > > compatible = "fcs,fxl6408";
> > > > > pinctrl-names = "default";
> > > > > pinctrl-0 = <&expander3_pmux>;
> > > > > reg = <0x44>;
> > > > > gpio-controller;
> > > > > #gpio-cells = <2>;
> > > > > interrupt-parent = <&portb>;
> > > > > interrupts = <23 IRQ_TYPE_NONE>;
> > > > > interrupt-controller;
> > > > > #interrupt-cells = <2>;
> > > > > };
> > > > >
> > > > > The common pattern looks like the devlink can't cope with suppliers from
> > > > > child dt node.
> > > >
> > > > fw_devlink doesn't have any problem dealing with child devices being
> > > > suppliers. The problem with your case is that the
> > > > drivers/gpio/gpio-dwapb.c driver directly parses the child nodes and
> > > > never creates struct devices for them. If you have a node with
> > > > compatible string, fw_devlink expects you to create and probe a struct
> > > > device for it. So change your driver to add the child devices as
> > > > devices instead of just parsing the node directly and doing stuff with
> > > > it.
> > > >
> > > > Either that, or stop putting "compatible" string in a node if you
> > > > don't plan to actually treat it as a device -- but that's too late for
> > > > this driver (it needs to be backward compatible). So change the driver
> > > > to add of_platform_populate() and write a driver that probes
> > > > "snps,dw-apb-gpio-port".
> > > >
> > >
> > > Thanks for the information. The "snps,dw-apb-gpio-port" is never used,
> > > so I just sent out a series to remove it.
> >
> > I'd actually prefer that you fix the kernel code to actually use it.
> > So that fw_devlink can be backward compatible (Older DT + new kernel).
> > The change is pretty trivial (I just have time to do it for you).
> >
>
> I agree the change is trivial, but it will add some useless LoCs like below.

It's not useless if it preserves backward compatibility with DT.

> I'm not sure whether this is acceptable.So add GPIO and DT maintainers to comment.
>
> Hi Linus, Rob,
>
> Could you please comment? A simple introduction of the problem:
>
> As pointed out by Saravana, "gpio-dwapb.c driver directly parses the child
> nodes and never creates struct devices for them. If you have a node with
> compatible string, fw_devlink expects you to create and probe a struct
> device for it", so once we set fw_devlink=on, then any users of gpio-dwapb
> as below won't be probed.
>
> device_foo {
> status = "okay"
> ...;
> reset-gpio = <&porta, 0, GPIO_ACTIVE_HIGH>;
> };
>
> The compatible string "snps,dw-apb-gpio-port" is never used, but it's in
> the dt-binding since the dw gpio mainlined. I believe the every dw apb
> users just copy the compatible string in to soc dtsi. So I submit a series
> to remove the unused "snps,dw-apb-gpio-port" https://lkml.org/lkml/2020/10/14/1186
> But this will break Older DT + new kernel with fw_devlink on. Which solution
> is better?
>
> If the following patch is acceptable, I can submit it once 5.10-rc1 is out.
>
> thanks
>
> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
> index 1d8d55bd63aa..b8e012e48b59 100644
> --- a/drivers/gpio/gpio-dwapb.c
> +++ b/drivers/gpio/gpio-dwapb.c
> @@ -19,6 +19,7 @@
> #include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/property.h>
> #include <linux/reset.h>
> @@ -694,6 +695,10 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
> }
> platform_set_drvdata(pdev, gpio);
>
> + err = devm_of_platform_populate(dev);
> + if (err)
> + goto out_unregister;
> +
> return 0;
>
> out_unregister:
> @@ -820,6 +825,25 @@ static struct platform_driver dwapb_gpio_driver = {
>
> module_platform_driver(dwapb_gpio_driver);
>
> +static const struct of_device_id dwapb_port_of_match[] = {
> + { .compatible = "snps,dw-apb-gpio-port" },
> + { /* Sentinel */ }
> +};
> +
> +static int dwapb_gpio_port_probe(struct platform_device *pdev)
> +{
> + return 0;

No, I'm not asking to do a stub/dummy probe. Move the stuff you do
inside device_for_each_child_node{} and dwapb_gpio_add_port() into
this probe function. Those two pieces of code together are effectively
"probing" a separate gpio controller for each of the child nodes. So
just create a real struct device (like we do for every other
"compatible" DT node) and probe each of them properly using the device
driver core.

-Saravana

> +}
> +
> +static struct platform_driver dwapb_gpio_port_driver = {
> + .driver = {
> + .name = "gpio-dwapb-port",
> + .of_match_table = dwapb_port_of_match,
> + },
> + .probe = dwapb_gpio_port_probe,
> +};
> +module_platform_driver(dwapb_gpio_port_driver);
> +
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Jamie Iles");
> MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");
>

\
 
 \ /
  Last update: 2020-10-15 10:49    [W:0.084 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site