lkml.org 
[lkml]   [2020]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/20] dt-bindings: usb: Convert DWC USB3 bindings to DT schema
On Wed, Oct 14, 2020 at 08:32:19AM -0500, Rob Herring wrote:
> On Wed, 14 Oct 2020 13:13:51 +0300, Serge Semin wrote:
> > DWC USB3 DT node is supposed to be compliant with the Generic xHCI
> > Controller schema, but with additional vendor-specific properties, the
> > controller-specific reference clocks and PHYs. So let's convert the
> > currently available legacy text-based DWC USB3 bindings to the DT schema
> > and make sure the DWC USB3 nodes are also validated against the
> > usb-xhci.yaml schema.
> >
> > Note we have to discard the nodename restriction of being prefixed with
> > "dwc3@" string, since in accordance with the usb-hcd.yaml schema USB nodes
> > are supposed to be named as "^usb(@.*)".
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >
> > ---
> >
> > Changelog v2:
> > - Discard '|' from the descriptions, since we don't need to preserve
> > the text formatting in any of them.
> > - Drop quotes from around the string constants.
> > - Fix the "clock-names" prop description to be referring the enumerated
> > clock-names instead of the ones from the Databook.
> > ---
> > .../devicetree/bindings/usb/dwc3.txt | 125 --------
> > .../devicetree/bindings/usb/snps,dwc3.yaml | 295 ++++++++++++++++++
> > 2 files changed, 295 insertions(+), 125 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt
> > create mode 100644 Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> >
>
>

> My bot found errors running 'make dt_binding_check' on your patch:
>
> ./Documentation/devicetree/bindings/usb/snps,dwc3.yaml:44:4: [warning] wrong indentation: expected 4 but found 3 (indentation)
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: dwc3@a600000: $nodename:0: 'dwc3@a600000' does not match '^usb(@.*)?'
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ff500000: snps,quirk-frame-length-adjustment: True is not of type 'array'
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>
>
> See https://patchwork.ozlabs.org/patch/1382003
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
>

Both of these errors are fixed in the following patches of the series:
[PATCH 17/20] dt-bindings: usb: qcom,dwc3: Validate DWC3 sub-node
[PATCH 15/20] dt-bindings: usb: meson-g12a-usb: Fix FL-adj property value

This patch preserves the original legacy bindings and doesn't touch the
depended bogus DT schemas.

-Sergey

\
 
 \ /
  Last update: 2020-10-14 19:38    [W:0.694 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site