Messages in this thread | | | Date | Tue, 13 Oct 2020 08:38:55 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v2 1/3] dt-bindings: rtc: add trickle-voltage-millivolt |
| |
On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote: > Some RTCs have a trickle charge that is able to output different voltages > depending on the type of the connected auxiliary power (battery, supercap, > ...). Add a property allowing to specify the necessary voltage. > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > > Changes in v2: > - use millivolt suffix instead of mV
Try again...
> > Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > index ee237b2ed66a..93f04d5e5307 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > @@ -42,6 +42,13 @@ properties: > Selected resistor for trickle charger. Should be given > if trickle charger should be enabled. > > + trickle-voltage-mV: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Selected voltage for trickle charger. Should be given > + if trickle charger should be enabled and the trickle voltage is different > + from the RTC main power supply. > + > wakeup-source: > $ref: /schemas/types.yaml#/definitions/flag > description: > -- > 2.26.2 >
| |