lkml.org 
[lkml]   [2020]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] iio: adc: aspeed: Setting ref_voltage in probe
Date
At ast2600 ref_voltage becomes configurable and this property is board
dependency.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
.../devicetree/bindings/iio/adc/aspeed_adc.txt | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
index 034fc2ba100e..0ba1980c4e06 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
@@ -3,8 +3,11 @@ Aspeed ADC
This device is a 10-bit converter for 16 voltage channels. All inputs are
single ended.

+At ast2600, this device split into two individual IPs and each contains 8 voltage channels.
+
+Chip level dtsi:
Required properties:
-- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
+- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc" or "aspeed,ast2600-adc"
- reg: memory window mapping address and length
- clocks: Input clock used to derive the sample clock. Expected to be the
SoC's APB clock.
@@ -20,3 +23,14 @@ Example:
resets = <&syscon ASPEED_RESET_ADC>;
#io-channel-cells = <1>;
};
+
+Board level dts:
+Required properties:
+- ref_voltage: (ast2600 only)
+ - Reference voltage in millivolts for the conversions.
+ - The range of value is 900 to 2700 mv.
+
+Example:
+&adc0 {
+ ref_voltage = <2500>;
+};
\ No newline at end of file
--
2.17.1
\
 
 \ /
  Last update: 2020-10-13 12:35    [W:0.304 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site