lkml.org 
[lkml]   [2020]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] PCI: dwc: Added link up check in map_bus of dw_child_pcie_ops
Date


> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 2020年9月30日 1:11
> To: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
> Cc: Z.q. Hou <zhiqiang.hou@nxp.com>; Lorenzo Pieralisi
> <lorenzo.pieralisi@arm.com>; linux-kernel@vger.kernel.org; PCI
> <linux-pci@vger.kernel.org>; Bjorn Helgaas <bhelgaas@google.com>;
> Michael Walle <michael@walle.cc>; Ard Biesheuvel <ardb@kernel.org>
> Subject: Re: [PATCH] PCI: dwc: Added link up check in map_bus of
> dw_child_pcie_ops
>
> On Tue, Sep 29, 2020 at 10:24 AM Gustavo Pimentel
> <Gustavo.Pimentel@synopsys.com> wrote:
> >
> > On Tue, Sep 29, 2020 at 5:5:41, Z.q. Hou <zhiqiang.hou@nxp.com> wrote:
> >
> > > Hi Lorenzo,
> > >
> > > Thanks a lot for your comments!
> > >
> > > > -----Original Message-----
> > > > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > > > Sent: 2020年9月28日 17:39
> > > > To: Z.q. Hou <zhiqiang.hou@nxp.com>
> > > > Cc: Rob Herring <robh@kernel.org>; linux-kernel@vger.kernel.org;
> > > > PCI <linux-pci@vger.kernel.org>; Bjorn Helgaas
> > > > <bhelgaas@google.com>; Gustavo Pimentel
> > > > <gustavo.pimentel@synopsys.com>; Michael Walle
> <michael@walle.cc>;
> > > > Ard Biesheuvel <ardb@kernel.org>
> > > > Subject: Re: [PATCH] PCI: dwc: Added link up check in map_bus of
> > > > dw_child_pcie_ops
> > > >
> > > > On Thu, Sep 24, 2020 at 04:24:47AM +0000, Z.q. Hou wrote:
> > > > > Hi Rob,
> > > > >
> > > > > Thanks a lot for your comments!
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Rob Herring <robh@kernel.org>
> > > > > > Sent: 2020年9月18日 23:28
> > > > > > To: Z.q. Hou <zhiqiang.hou@nxp.com>
> > > > > > Cc: linux-kernel@vger.kernel.org; PCI
> > > > > > <linux-pci@vger.kernel.org>; Lorenzo Pieralisi
> > > > > > <lorenzo.pieralisi@arm.com>; Bjorn Helgaas
> > > > > > <bhelgaas@google.com>; Gustavo Pimentel
> > > > > > <gustavo.pimentel@synopsys.com>; Michael Walle
> > > > <michael@walle.cc>;
> > > > > > Ard Biesheuvel <ardb@kernel.org>
> > > > > > Subject: Re: [PATCH] PCI: dwc: Added link up check in map_bus
> > > > > > of dw_child_pcie_ops
> > > > > >
> > > > > > On Fri, Sep 18, 2020 at 5:02 AM Z.q. Hou
> > > > > > <zhiqiang.hou@nxp.com>
> > > > wrote:
> > > > > > >
> > > > > > > Hi Rob,
> > > > > > >
> > > > > > > Thanks a lot for your comments!
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Rob Herring <robh@kernel.org>
> > > > > > > > Sent: 2020年9月17日 4:29
> > > > > > > > To: Z.q. Hou <zhiqiang.hou@nxp.com>
> > > > > > > > Cc: linux-kernel@vger.kernel.org; PCI
> > > > > > > > <linux-pci@vger.kernel.org>; Lorenzo Pieralisi
> > > > > > > > <lorenzo.pieralisi@arm.com>; Bjorn Helgaas
> > > > > > > > <bhelgaas@google.com>; Gustavo Pimentel
> > > > > > > > <gustavo.pimentel@synopsys.com>; Michael Walle
> > > > > > <michael@walle.cc>;
> > > > > > > > Ard Biesheuvel <ardb@kernel.org>
> > > > > > > > Subject: Re: [PATCH] PCI: dwc: Added link up check in
> > > > > > > > map_bus of dw_child_pcie_ops
> > > > > > > >
> > > > > > > > On Tue, Sep 15, 2020 at 11:49 PM Zhiqiang Hou
> > > > > > <Zhiqiang.Hou@nxp.com>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > > > > > > > >
> > > > > > > > > On NXP Layerscape platforms, it results in SError in the
> > > > > > > > > enumeration of the PCIe controller, which is not
> > > > > > > > > connecting with an Endpoint device. And it doesn't make
> > > > > > > > > sense to enumerate the Endpoints when the PCIe link is
> > > > > > > > > down. So this patch added the link up check to avoid to
> > > > > > > > > fire configuration
> > > > transactions on link down bus.
> > > > > > > >
> > > > > > > > Michael reported the same issue as well.
> > > > > > > >
> > > > > > > > What happens if the link goes down between the check and
> > > > > > > > the
> > > > access?
> > > > > > >
> > > > > > > This patch cannot cover this case, and will get the SError.
> > > > > > > But I think it makes sense to avoid firing transactions on link down
> bus.
> > > > > >
> > > > > > That's impossible to do without a race even in h/w.
> > > > >
> > > > > Agree.
> > > > >
> > > > > >
> > > > > > > > It's a racy check. I'd like to find an alternative solution.
> > > > > > > > It's even worse if Layerscape is used in ECAM mode. I
> > > > > > > > looked at the EDK2 setup for layerscape[1] and it looks
> > > > > > > > like root ports are just skipped if link
> > > > > > is down.
> > > > > > > > Maybe a link down just never happens once up, but if so,
> > > > > > > > then we only need to check it once and fail probe.
> > > > > > >
> > > > > > > Many customers connect the FPGA Endpoint, which may
> > > > > > > establish PCIe link after the PCIe enumeration and then
> > > > > > > rescan the PCIe bus, so I think it should not exit the probe
> > > > > > > of root port even if there is not link up
> > > > > > during enumeration.
> > > > > >
> > > > > > That's a good reason. I want to unify the behavior here as it
> > > > > > varies per platform currently and wasn't sure which way to go.
> > > > > >
> > > > > >
> > > > > > > > I've dug into this a bit more and am curious about the
> > > > > > > > PCIE_ABSERR register setting which is set to:
> > > > > > > >
> > > > > > > > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of
> > > > > > > > non-posted request */
> > > > > > > >
> > > > > > > > It seems to me this is not what we want at least for
> > > > > > > > config accesses, but commit 84d897d6993 where this was
> > > > > > > > added seems to say otherwise. Is it not possible to
> > > > > > > > configure the response per access
> > > > type?
> > > > > > >
> > > > > > > Thanks a lot for your investigation!
> > > > > > > The story is like this: Some customers worry about these
> > > > > > > silent error (DWC PCIe IP won't forward the error of
> > > > > > > outbound non-post request by default), so we were pushed to
> > > > > > > enable the error forwarding to AXI in the commit
> > > > > > > 84d897d6993 as you saw. But it cannot differentiate the
> > > > > > > config transactions from the MEM_rd, except the Vendor ID
> > > > > > > access, which is controlled by a separate bit and it was set
> > > > > > > to not forward error of access
> > > > > > of Vendor ID.
> > > > > > > So we think it's okay to enable the error forwarding, the
> > > > > > > SError should not occur, because after the enumeration it
> > > > > > > won't access the
> > > > > > non-existent functions.
> > > > > >
> > > > > > We've rejected upstream support for platforms aborting on
> > > > > > config accesses[1]. I think there's clear consensus that
> > > > > > aborting is the wrong behavior.
> > > > > >
> > > > > > Do MEM_wr errors get forwarded? Seems like that would be
> enough.
> > > > > > Also, wouldn't page faults catch most OOB accesses anyways?
> > > > > > You need things page aligned anyways with an IOMMU and doing
> > > > > > userspace access or guest assignment.
> > > > >
> > > > > Yes, errors of MEM_wr can be forwarded.
> > > > >
> > > > > >
> > > > > > Here's another idea, how about only enabling forwarding errors
> > > > > > if the link is up? If really would need to be configured any
> > > > > > time the link state changes rather than just at probe. I'm not
> > > > > > sure if you have a way to disable it on link down though.
> > > > >
> > > > > Dug deeper into this issue and found the setting of not
> > > > > forwarding error of non-existent Vender ID access counts on the link
> partner: 1.
> > > > > When there is a link partner (namely link up), it will return
> > > > > 0xffff when read non-existent function Vendor ID and won't
> > > > > forward error to AXI. 2. When no link partner (link down), it
> > > > > will forward the error of reading non-existent function Vendor
> > > > > ID to AXI and result in SError.
> > > > >
> > > > > I think this is a DWC PCIe IP specific issue but not get
> > > > > feedback from design team. I'm thinking to disable this error
> > > > > forwarding just like other platforms, since when these errors
> > > > > (UR, CA and CT) are detected, AER driver can also report the error
> and try to recover.
> > > >
> > > > I take this as you shall send a patch to fix this issue shortly, is this
> correct ?
> > >
> > > The issue becomes complex:
> > > I reviewed the DWC PCIe databook of verion 4.40a which is used on
> Layerscape platforms, and it said that " Your RC application should not
> generate CFG requests until it has confirmed that the link is up by sampling
> the smlh_link_up and rmlh_link_up outputs".
> > > So, the link up checking should not be remove before each outbound CFG
> access.
> > > Gustavo, can you share more details on the link up checking? Does it only
> exist in the 4.40a?
> >
> > Hi Zhiqiang,
> >
> > According to the information that I got from the IP team you are
> > correct, the same requirement still exists on the newer IP versions.
>
> How is that possible in a race free way?
>
> Testing on meson and layerscape (with the forwarding of errors
> disabled) shows a link check is not needed. But then dra7xx seems to need
> one (or has some f/w setup).

Seems i.MX PCIe driver also has to check link up, otherwise the SError will occur.
Actually I found when the link is not up, the i.MX PCIe driver will probe fail and not continue to enumeration, so I'm wondering how it happens on i.MX. I have email i.MX owner to query the detail, but seems he's still on Chinese National Day holiday and does not feedback.

Thanks,
Zhiqiang

>
> Rob
\
 
 \ /
  Last update: 2020-10-12 06:23    [W:0.128 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site