lkml.org 
[lkml]   [2020]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/2] PCI/ERR: Call pci_bus_reset() before calling ->slot_reset() callback
On Sun, Oct 11, 2020 at 10:03:40PM -0700, sathyanarayanan.nkuppuswamy@gmail.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
> Currently if report_error_detected() or report_mmio_enabled()
> functions requests PCI_ERS_RESULT_NEED_RESET, current
> pcie_do_recovery() implementation does not do the requested
> explicit device reset, but instead just calls the
> report_slot_reset() on all affected devices. Notifying about the
> reset via report_slot_reset() without doing the actual device
> reset is incorrect. So call pci_bus_reset() before triggering
> ->slot_reset() callback.
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
> drivers/pci/pcie/err.c | 6 +-----
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index c543f419d8f9..067c58728b88 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -181,11 +181,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> }
>
> if (status == PCI_ERS_RESULT_NEED_RESET) {
> - /*
> - * TODO: Should call platform-specific
> - * functions to reset slot before calling
> - * drivers' slot_reset callbacks?
> - */
> + pci_reset_bus(dev);

pci_reset_bus() returns an error, do you need to consult that before
unconditionally setting PCI_ERS_RESULT_RECOVERED?

> status = PCI_ERS_RESULT_RECOVERED;
> pci_dbg(dev, "broadcast slot_reset message\n");
> pci_walk_bus(bus, report_slot_reset, &status);
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-10-12 23:06    [W:0.086 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site