lkml.org 
[lkml]   [2020]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] cx82310_eth: re-enable ethernet mode after router reboot
On Mon, 12 Oct 2020 12:42:55 +0200 Ondrej Zary wrote:
> On Monday 12 October 2020, Jakub Kicinski wrote:
> > On Sat, 10 Oct 2020 16:00:46 +0200 Ondrej Zary wrote:
> > > When the router is rebooted without a power cycle, the USB device
> > > remains connected but its configuration is reset. This results in
> > > a non-working ethernet connection with messages like this in syslog:
> > > usb 2-2: RX packet too long: 65535 B
> > >
> > > Re-enable ethernet mode when receiving a packet with invalid size of
> > > 0xffff.
> >
> > Patch looks good, but could you explain what's a reboot without a power
> > cycle in this case? The modem gets reset but USB subsystem doesn't know
> > it and doesn't go though a unbind() + bind() cycle?
>
> The router can be rebooted through the web interface. The reboot does not
> disconnect the USB device - it remains connected as if nothing happened. Only
> wrong data starts to come in.

I see. Applied to net-next, thanks!

\
 
 \ /
  Last update: 2020-10-12 18:51    [W:0.038 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site