lkml.org 
[lkml]   [2020]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] qla2xxx: Return EBUSY on fcport deletion
On Mon, 12 Oct 2020, 2:11am, Daniel Wagner wrote:

> When the fcport is about to be deleted we should return EBUSY instead
> of ENODEV. Only for EBUSY the request will be requeued in a multipath
> setup.
>
> Also in case we have a valid qpair but the firmware has not yet
> started return EBUSY to avoid dropping the request.
>
> Signed-off-by: Daniel Wagner <dwagner@suse.de>
> ---
> Hi,
>
> During port bounce and fail tests we observed that requests get
> dropped on a failing path because the driver returned ENODEV and thus
> the multipath code didn't requeue the request.
>
> The tests were done with only the 'fcport && fcport->deleted' condition
> but Hannes suggested we might as well do the same for 'qpair &&
> !qpair->fw_started'.
>
> Thanks,
> Daniel
>
> drivers/scsi/qla2xxx/qla_nvme.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
> index 5cc1bbb1ed74..db8b802b147c 100644
> --- a/drivers/scsi/qla2xxx/qla_nvme.c
> +++ b/drivers/scsi/qla2xxx/qla_nvme.c
> @@ -555,8 +555,11 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
>
> fcport = qla_rport->fcport;
>
> - if (!qpair || !fcport || (qpair && !qpair->fw_started) ||
> + if ((qpair && !qpair->fw_started) ||
> (fcport && fcport->deleted))
> + return -EBUSY;
> +
> + if (!qpair || !fcport)
> return rval;
>
> vha = fcport->vha;
>

This does not appear to be cut against the latest for-next/staging; "rval"
is not used there for the initial set of returns.

Anyway, returning EBUSY is the right way to go.

Regards,
-Arun

\
 
 \ /
  Last update: 2020-10-12 18:07    [W:0.041 / U:2.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site