lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v5] Introduce support for Systems Management Driver over WMI for Dell Systems
Date
Hi,

As promised here is a full review of this patch, focussing mainly
on the code aspect.

Phew, that took a long time, lots of small remarks, but nothing
major so I think this should be ready to go upstream after a
couple more revisions.

On 9/29/20 4:55 AM, Divya Bharathi wrote:
> The Dell WMI Systems Management Driver provides a sysfs
> interface for systems management to enable BIOS configuration
> capability on certain Dell Systems.
>
> This driver allows user to configure Dell systems with a
> uniform common interface. To facilitate this, the patch
> introduces a generic way for driver to be able to create
> configurable BIOS Attributes available in Setup (F2) screen.
>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: mark gross <mgross@linux.intel.com>
>
> Co-developed-by: Mario Limonciello <mario.limonciello@dell.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> Co-developed-by: Prasanth KSR <prasanth.ksr@dell.com>
> Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
> Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>

Hmm, checkpatch is saying:

WARNING: Missing Signed-off-by: line by nominal patch author 'Divya Bharathi <divya27392@gmail.com>'

I assume the dell address is the one you want to use ?

If so try setting the following in ~/.gitconfig:

[user]
email = divya.bharathi@dell.com

And then do:

git commit --amend --reset-author

To change the author which git is using for the patch.

> ---
>
> Changes from v4 to v5:
> - Correct Kconfig description to not use "WMI" twice.
> - s/is_authentication_set/is_enabled/
> - Specify that all attributes are optional and take UTF8
> - Change authentication type to "role" and "mechanism"
> - Explain what semicolons are
> - Adjust whitespace of documentation
>
> Changes from v3 to v4:
> - Create a firmware-attributes class and tie ksets to a virtual device in it
> - Make modifier and value_modifier "dell only" attributes.
> - Correct some errors caught by kernel build bot around missing prototypes
> - Remove mutexes from populate_* functions and put in init_dell_bios_attrib_wmi instead
> - Move all code into a subdirectory drivers/platform/x86/dell-wmi-sysman and remove dell-wmi-*
> prefix on files
> - Move all data structures into shared struct
> - In alloc functions instead of kzalloc use kcalloc and check that there is no overflow
> + Same check for other alloc_foo-data functions
> - populate_*: Move sysfs_create_group to end of the function to prevent race conditions
> - Save kernel object into each data instance and only remove that rather than sysfs_remove_group
> - Document in sysfs file what causes change uevents to come through
> - Only notify with change uevent one time on multiple settings modifications
> - Adjust lots of string handling
> - Make more objects static
> - Various whitespace corrections
> - Document map_wmi_error properly
> - Bump version to 5.11 (February 2021)
>
> Changes from v2 to v3:
> - Fix a possible NULL pointer error in init
> - Add missing newlines to all dev_err/dev_dbg/pr_err/pr_debug statements
> - Correct updating passwords when both Admin and System password are set
> - Correct the WMI driver name
> - Correct some namespace clashing when compiled into the kernel (Reported by Mark Gross)
> - Correct some comment typos
> - Adopt suggestions made by Hans:
> + Use single global mutex
> + Clarify reason for uevents with a comment
> + Remove functions for set and get current password
> + Rename lower_bound to min_value and upper_bound to max_value
> + Rename possible_value to possible_values
> + Remove references to float
> + Build a separate passwords directory again since it behaves differently from the other
> attributes
> + Move more calls from pr_err -> dev_err
> - Documentation cleanups (see v2 patch feedback)
> + Grouping types
> + Syntax of `modifier` output
>
> Changes from v1 to v2:
> - use pr_fmt instead of pr_err(DRIVER_NAME
> - re-order variables reverse xmas tree order
> - correct returns of -1 to error codes
> - correct usage of {} on some split line statements
> - Refine all documentation deficiencies suggested by Hans
> - Merge all attributes to a single directory
> - Overhaul WMI interface interaction as suggested by Hans
> * Move WMI driver registration to start of module
> * Remove usage of lists that only use first entry for WMI interfaces
> * Create a global structure shared across interface source files
> * Make get_current_password function static
> * Remove get_pending changes function, shared across global structure now.
> - Overhaul use of mutexes
> * Make kset list mutex shared across source files
> * Remove unneeded dell-wmi-sysman call_mutex
> * Keep remaining call_mutexes in WMI functions
> - Move security area calculation into a function
> - Use NLS helper for utf8->utf16 conversion
>
> .../testing/sysfs-class-firmware-attributes | 219 +++++++
> MAINTAINERS | 8 +
> drivers/platform/x86/Kconfig | 12 +
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/dell-wmi-sysman/Makefile | 8 +
> .../x86/dell-wmi-sysman/biosattr-interface.c | 199 ++++++
> .../x86/dell-wmi-sysman/dell-wmi-sysman.h | 195 ++++++
> .../x86/dell-wmi-sysman/enum-attributes.c | 188 ++++++
> .../x86/dell-wmi-sysman/int-attributes.c | 169 +++++
> .../x86/dell-wmi-sysman/passobj-attributes.c | 171 +++++
> .../dell-wmi-sysman/passwordattr-interface.c | 167 +++++
> .../x86/dell-wmi-sysman/string-attributes.c | 156 +++++
> drivers/platform/x86/dell-wmi-sysman/sysman.c | 589 ++++++++++++++++++
> 13 files changed, 2082 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-firmware-attributes
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/Makefile
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/enum-attributes.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/int-attributes.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/string-attributes.c
> create mode 100644 drivers/platform/x86/dell-wmi-sysman/sysman.c
>
> diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes
> new file mode 100644
> index 000000000000..1228beeb8ff3
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes
> @@ -0,0 +1,219 @@
> +What: /sys/class/firmware-attributes/*/attributes/*/
> +Date: February 2021
> +KernelVersion: 5.11
> +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> + Mario Limonciello <mario.limonciello@dell.com>,
> + Prasanth KSR <prasanth.ksr@dell.com>
> +Description:
> + A sysfs interface for systems management software to enable
> + configuration capability on supported systems. This directory
> + exposes interfaces for interacting with configuration options.
> +
> + Unless otherwise specified in an attribute description all attributes are optional
> + and will accept UTF-8 input.
> +
> + type: A file that can be read to obtain the type of attribute. This attribute is
> + mandatory.
> +
> + The following are known types:
> + - enumeration: a set of pre-defined valid values
> + - integer: a range of numerical values
> + - string
> +
> + All attribute types support the following values:
> +
> + current_value: A file that can be read to obtain the current
> + value of the <attr>.
> +
> + This file can also be written to in order to update the value of a
> + <attr>
> +
> + This attribute is mandatory.
> +
> + default_value: A file that can be read to obtain the default
> + value of the <attr>
> +
> + display_name: A file that can be read to obtain a user friendly
> + description of the at <attr>
> +
> + display_name_language_code: A file that can be read to obtain
> + the IETF language tag corresponding to the
> + "display_name" of the <attr>
> +
> + "enumeration"-type specific properties:
> +
> + possible_values: A file that can be read to obtain the possible
> + values of the <attr>. Values are separated using
> + semi-colon (``;``).
> +
> + "integer"-type specific properties:
> +
> + min_value: A file that can be read to obtain the lower
> + bound value of the <attr>
> +
> + max_value: A file that can be read to obtain the upper
> + bound value of the <attr>
> +
> + scalar_increment: A file that can be read to obtain the scalar value used for
> + increments of current_value this attribute accepts.
> +
> + "string"-type specific properties:
> +
> + max_length: A file that can be read to obtain the maximum
> + length value of the <attr>
> +
> + min_length: A file that can be read to obtain the minimum
> + length value of the <attr>
> +
> + Dell specific class extensions
> + --------------------------
> +
> + On Dell systems the following additional attributes are available:
> +
> + dell_modifier: A file that can be read to obtain attribute-level
> + dependency rule. It says an attribute X will become read-only or
> + suppressed, if/if-not attribute Y is configured.
> +
> + modifier rules can be in following format:
> + [ReadOnlyIf:<attribute>=<value>]
> + [ReadOnlyIfNot:<attribute>=<value>]
> + [SuppressIf:<attribute>=<value>]
> + [SuppressIfNot:<attribute>=<value>]
> +
> + For example:
> + AutoOnFri/dell_modifier has value,
> + [SuppressIfNot:AutoOn=SelectDays]
> +
> + This means AutoOnFri will be suppressed in BIOS setup if AutoOn
> + attribute is not "SelectDays" and its value will not be effective
> + through sysfs until this rule is met.
> +
> + Enumeration attributes also support the following:
> +
> + dell_value_modifier: A file that can be read to obtain value-level dependency.
> + This file is similar to dell_modifier but here, an
> + attribute's current value will be forcefully changed based
> + dependent attributes value.
> +
> + dell_value_modifier rules can be in following format:
> + <value>[ForceIf:<attribute>=<value>]
> + <value>[ForceIfNot:<attribute>=<value>]
> +
> + For example,
> + LegacyOrom/dell_value_modifier has value:
> + Disabled[ForceIf:SecureBoot=Enabled]
> + This means LegacyOrom's current value will be forced to
> + "Disabled" in BIOS setup if SecureBoot is Enabled and its
> + value will not be effective through sysfs until this rule is
> + met.
> +
> +What: /sys/class/firmware-attributes/*/authentication/
> +Date: February 2021
> +KernelVersion: 5.11
> +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> + Mario Limonciello <mario.limonciello@dell.com>,
> + Prasanth KSR <prasanth.ksr@dell.com>
> +
> + Devices support various authentication mechanisms which can be exposed
> + as a separate configuration object.
> +
> + For example a "BIOS Admin" password and "System" Password can be set,
> + reset or cleared using these attributes.
> + - An "Admin" password is used for preventing modification to the BIOS
> + settings.
> + - A "System" password is required to boot a machine.
> +
> + Change in any of these two authentication methods will also generate an
> + uevent KOBJ_CHANGE.
> +
> + is_enabled: A file that can be read to obtain a0/1 flag to see if <attr>
> + authentication is enabled.
> +
> + role: The type of authentication used.
> + Known types:
> + bios-admin: Representing a BIOS administrator password
> + power-on: Representing a password required to use the system
> +
> + mechanism: The means of authentication.
> + Only supported type currently is "password".
> +
> + max_password_length: A file that can be read to obtain the
> + maximum length of the Password
> +
> + min_password_length: A file that can be read to obtain the
> + minimum length of the Password
> +
> + current_password: A write only value used for privileged access such as
> + setting attributes when a system or admin password is set
> + or resetting to a new password

Can you add the following here:
This attribute is mandatory when mechanism == "password".

> +
> + new_password: A write only value that when used in tandem with
> + current_password will reset a system or admin password.
> +
> + Note, password management is session specific. If Admin password is set,
> + same password must be written into current_password file (required for
> + password-validation) and must be cleared once the session is over.
> + For example:
> + echo "password" > current_password
> + echo "disabled" > TouchScreen/current_value
> + echo "" > current_password
> +
> + Drivers may emit a CHANGE uevent when a password is set or unset
> + userspace may check it again.
> +
> + On Dell systems, if Admin password is set, then all BIOS attributes
> + require password validation.
> +
> +What: /sys/class/firmware-attributes/*/attributes/pending_reboot
> +Date: February 2021
> +KernelVersion: 5.11
> +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> + Mario Limonciello <mario.limonciello@dell.com>,
> + Prasanth KSR <prasanth.ksr@dell.com>
> +Description:
> + A read-only attribute reads 1 if a reboot is necessary to apply
> + pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is
> + generated when it changes to 1.
> +
> + 0: All BIOS attributes setting are current
> + 1: A reboot is necessary to get pending BIOS attribute changes
> + applied
> +
> + Note, userspace applications need to follow below steps for efficient
> + BIOS management,
> + 1. Check if admin password is set. If yes, follow session method for
> + password management as briefed under authentication section above.
> + 2. Before setting any attribute, check if it has any modifiers
> + or value_modifiers. If yes, incorporate them and then modify
> + attribute.
> +
> + Drivers may emit a CHANGE uevent when this value changes and userspace
> + may check it again.
> +
> +What: /sys/class/firmware-attributes/*/attributes/reset_bios
> +Date: February 2021
> +KernelVersion: 5.11
> +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> + Mario Limonciello <mario.limonciello@dell.com>,
> + Prasanth KSR <prasanth.ksr@dell.com>
> +Description:
> + This attribute can be used to reset the BIOS Configuration.
> + Specifically, it tells which type of reset BIOS configuration is being
> + requested on the host.
> +
> + Reading from it returns a list of supported options encoded as:
> +
> + 'builtinsafe' (Built in safe configuration profile)
> + 'lastknowngood' (Last known good saved configuration profile)
> + 'factory' (Default factory settings configuration profile)
> + 'custom' (Custom saved configuration profile)
> +
> + The currently selected option is printed in square brackets as
> + shown below:
> +
> + # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
> + # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
> + # builtinsafe lastknowngood [factory] custom
> +
> + Note that any changes to this attribute requires a reboot
> + for changes to take effect.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 190c7fa2ea01..264c8e12fc61 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4951,6 +4951,14 @@ M: Mario Limonciello <mario.limonciello@dell.com>
> S: Maintained
> F: drivers/platform/x86/dell-wmi-descriptor.c
>
> +DELL WMI SYSMAN DRIVER
> +M: Divya Bharathi <divya.bharathi@dell.com>
> +M: Mario Limonciello <mario.limonciello@dell.com>
> +M: Prasanth Ksr <prasanth.ksr@dell.com>
> +L: platform-driver-x86@vger.kernel.org
> +S: Maintained
> +F: drivers/platform/x86/dell-wmi-syman/*
> +
> DELL WMI NOTIFICATIONS DRIVER
> M: Matthew Garrett <mjg59@srcf.ucam.org>
> M: Pali Rohár <pali@kernel.org>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 40219bba6801..190461cfc5da 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -430,6 +430,18 @@ config DELL_WMI
> To compile this driver as a module, choose M here: the module will
> be called dell-wmi.
>
> +config DELL_WMI_SYSMAN
> + tristate "Dell WMI-based Systems management driver"
> + depends on ACPI_WMI
> + depends on DMI
> + select NLS
> + help
> + This driver allows changing BIOS settings on many Dell machines from
> + 2018 and newer without the use of any additional software.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called dell-wmi-sysman.
> +
> config DELL_WMI_DESCRIPTOR
> tristate
> depends on ACPI_WMI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 5f823f7eff45..36ce38e80c8f 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -47,6 +47,7 @@ obj-$(CONFIG_DELL_WMI) += dell-wmi.o
> obj-$(CONFIG_DELL_WMI_DESCRIPTOR) += dell-wmi-descriptor.o
> obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
> obj-$(CONFIG_DELL_WMI_LED) += dell-wmi-led.o
> +obj-$(CONFIG_DELL_WMI_SYSMAN) += dell-wmi-sysman/
>
> # Fujitsu
> obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o
> diff --git a/drivers/platform/x86/dell-wmi-sysman/Makefile b/drivers/platform/x86/dell-wmi-sysman/Makefile
> new file mode 100644
> index 000000000000..825fb2fbeea8
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/Makefile
> @@ -0,0 +1,8 @@
> +obj-$(CONFIG_DELL_WMI_SYSMAN) += dell-wmi-sysman.o
> +dell-wmi-sysman-objs := sysman.o \
> + enum-attributes.o \
> + int-attributes.o \
> + string-attributes.o \
> + passobj-attributes.o \
> + biosattr-interface.o \
> + passwordattr-interface.o
> diff --git a/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c b/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> new file mode 100644
> index 000000000000..820c05d0fb8c
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
> @@ -0,0 +1,199 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to SET methods under BIOS attributes interface GUID for use
> + * with dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include <linux/nls.h>
> +#include <linux/wmi.h>
> +#include "dell-wmi-sysman.h"
> +
> +#define SETDEFAULTVALUES_METHOD_ID 0x02
> +#define SETBIOSDEFAULTS_METHOD_ID 0x03
> +#define SETATTRIBUTE_METHOD_ID 0x04
> +
> +static int call_biosattributes_interface(struct wmi_device *wdev, char *in_args, size_t size,
> + int method_id)
> +{
> + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
> + struct acpi_buffer input;
> + union acpi_object *obj;
> + acpi_status status;
> + int ret = -EIO;
> +
> + input.length = (acpi_size) size;
> + input.pointer = in_args;
> + status = wmidev_evaluate_method(wdev, 0, method_id, &input, &output);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> + obj = (union acpi_object *)output.pointer;
> + if (obj->type == ACPI_TYPE_INTEGER)
> + ret = obj->integer.value;
> +
> + if (wmi_priv.pending_changes == 0) {
> + wmi_priv.pending_changes = 1;
> + /* let userland know it may need to check reboot pending again */
> + kobject_uevent(&wdev->dev.kobj, KOBJ_CHANGE);

I think it would make more sense to to this in the class_dev
created in sysman_init() that way all the uevents come from a single dev
rather then from 2 different wmi-devices.

> + }
> + kfree(output.pointer);
> + return map_wmi_error(ret);
> +}
> +
> +/**
> + * set_attribute() - Update an attribute value
> + * @a_name: The attribute name
> + * @a_value: The attribute value
> + *
> + * Sets an attribute to new value
> + **/
> +int set_attribute(const char *a_name, const char *a_value)
> +{
> + size_t security_area_size, string_area_size, buffer_size;
> + char *attribute_name, *attribute_value;

attribute_name and attribute_value store an utf16 string,
so IMHO it would be better to use "u16 *" as type here,
that also removes the need to multiply the return value
from utf8s_to_utf16s by 2, because when these are
u16 * then the pointer-arithmic of taking them + adding
the return value as is will correctly give a u16 * to
the end of the string.

> + u8 *name_len, *value_len;

Looking at the code below these 2 should be u16 *, not u8 *,
since you skip sizeof(u16) for the lengths. This happens to
work as long as length < 255, because you use kzalloc and x86
is little endian. But if we ever get values with a length > 255,
or for that matter userspace tries to set a value (for a string
attribute) with such a length then this will break.

Also maybe we should verify that the max_length for strings
always fits in an u16 ?

> + char *buffer = NULL;
> + int ret;
> +
> + mutex_lock(&wmi_priv.mutex);
> + if (!wmi_priv.bios_attr_wdev) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + /* build/calculate buffer */
> + security_area_size = calculate_security_buffer();
> + string_area_size = (strlen(a_name) + strlen(a_value))*2;

Maybe use " * sizeof(u16)" here instead of "*2", at least I assume
that that is where the * 2 is coming from? Note if you think you have
a good reason to use " * 2" then please let me know.

Also you must put spaces on both sides of the "*" operator.

> + buffer_size = security_area_size + string_area_size + sizeof(u16) * 2;
> + buffer = kzalloc(buffer_size, GFP_KERNEL);
> + if (!buffer) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + /* build security area */
> + if (strlen(wmi_priv.current_admin_password) > 0)
> + populate_security_buffer(buffer, wmi_priv.current_admin_password);

It seems to me that the strlen(wmi_priv.current_admin_password) > 0 check
belongs in populate_security_buffer(), just like calculate_security_buffer()
has this check.

And populate_security_buffer() should probably explicitly set the 2
u32 values to 0 if the check fails, rather then relying on the buffer
being pre-filled with zeros.

> +
> + /* build variables to set */
> + name_len = buffer + security_area_size;

If you change the type of name_len to an u16 *
then this needs a cast:

name_len = (u16 *)(buffer + security_area_size);

> + attribute_name = name_len + sizeof(u16);

Note that if you change the type of name_len to an u16 *
then this should become:

attribute_name = name_len + 1;

> + *name_len = utf8s_to_utf16s(a_name, strlen(a_name), UTF16_HOST_ENDIAN,
> + (wchar_t *) attribute_name, MAX_BUFF) * 2;

You reserve strlen(a_name) wchar_t-s space, so instead of MAX_BUFF you
should pass strlen(a_name) note the maxlen attribute is expressed in
wchar_t-s not in bytes.

Also as you check below utf8s_to_utf16s may return a negative error code,
but *name_len is an u8, so the error check below:

> + if (*name_len < 0) {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "UTF16 conversion failed\n");
> + goto out;
> + }

Will never be true, since you have truncated e.g. -EINVAL to some 0-255 value.
To preserve error codes here you should do 2 things:

1. Store the return value in "ret" and check ret, and then after the
check indicates there was no error, store ret in *name_len.
You can then also drop the ret = -EINVAL, so that you propagate the
actual error returned by utf8s_to_utf16s

2. To properly preserve the error code, you must also remove
the " * 2" as mentioned above already if you change the type of
attribute_name to an "u16 *" then the * 2 is not necessary.

Also about the dev_err in the error handling, this dev_err should use
&wmi_priv.bios_attr_wdev->dev (you use that above for the -ENODEV check).

> +
> + value_len = (u8 *) attribute_name + *name_len;

The u8 * cast can be dropped here now.

> + attribute_value = value_len + sizeof(u16);

Note that if you change the type of value_len to an u16 *
then this should become:

attribute_value = value_len + 1;

> + *value_len = utf8s_to_utf16s(a_value, strlen(a_value), UTF16_HOST_ENDIAN,
> + (wchar_t *) attribute_value, MAX_BUFF) * 2;

Same remark wrt MAX_BUFF again.

Same remark wrt error-handling again.

> + if (*value_len < 0) {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "UTF16 conversion failed\n");

This dev_err should use &wmi_priv.bios_attr_wdev->dev (you use that above for the -ENODEV check).

> + goto out;
> + }
> +
> + ret = call_biosattributes_interface(wmi_priv.bios_attr_wdev,
> + buffer, buffer_size,
> + SETATTRIBUTE_METHOD_ID);
> + if (ret == -EOPNOTSUPP)
> + dev_err(&wmi_priv.password_attr_wdev->dev, "admin password must be configured\n");
> + else if (ret == -EACCES)
> + dev_err(&wmi_priv.password_attr_wdev->dev, "invalid password\n");

Both of these dev_err should use &wmi_priv.bios_attr_wdev->dev.

> +
> +out:
> + kfree(buffer);
> + mutex_unlock(&wmi_priv.mutex);
> +
> + return ret;
> +}
> +
> +/**
> + * set_bios_defaults() - Resets BIOS defaults
> + * @deftype: the type of BIOS value reset to issue.
> + *
> + * Resets BIOS defaults
> + **/
> +int set_bios_defaults(u8 deftype)
> +{
> + size_t security_area_size, buffer_size;
> + size_t integer_area_size = sizeof(u8);
> + char *buffer = NULL;
> + u8 *defaultType;
> + int ret;
> +
> + mutex_lock(&wmi_priv.mutex);
> + if (!wmi_priv.bios_attr_wdev) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + security_area_size = calculate_security_buffer();
> + buffer_size = security_area_size + integer_area_size;
> + buffer = kzalloc(buffer_size, GFP_KERNEL);
> + if (!buffer)
> + return -ENOMEM;

As Mark pointed out this need to use a goto out to unlock
the mutex.

> +
> + /* build security area */
> + if (strlen(wmi_priv.current_admin_password) > 0)
> + populate_security_buffer(buffer, wmi_priv.current_admin_password);

Same remark as above wrt moving the strlen() check to
populate_security_buffer(). This also shows that this is not
only consistent with calculate_security_buffer(), it also
makes the code easier to read because now you can drop the
strlen() > 0 check in all the callers.

> +
> + defaultType = buffer + security_area_size;
> + *defaultType = deftype;
> +
> + ret = call_biosattributes_interface(wmi_priv.bios_attr_wdev, buffer, buffer_size,
> + SETBIOSDEFAULTS_METHOD_ID);
> + if (ret)
> + dev_err(&wmi_priv.bios_attr_wdev->dev, "reset BIOS defaults failed: %d\n", ret);
> +
> +out:
> + kfree(buffer);
> + mutex_unlock(&wmi_priv.mutex);
> +
> + return ret;
> +}
> +
> +static int bios_attr_set_interface_probe(struct wmi_device *wdev, const void *context)
> +{
> + mutex_lock(&wmi_priv.mutex);
> + wmi_priv.bios_attr_wdev = wdev;
> + mutex_unlock(&wmi_priv.mutex);
> + return 0;
> +}
> +
> +static int bios_attr_set_interface_remove(struct wmi_device *wdev)
> +{
> + mutex_lock(&wmi_priv.mutex);
> + wmi_priv.bios_attr_wdev = NULL;
> + mutex_unlock(&wmi_priv.mutex);
> + return 0;
> +}
> +
> +static const struct wmi_device_id bios_attr_set_interface_id_table[] = {
> + { .guid_string = DELL_WMI_BIOS_ATTRIBUTES_INTERFACE_GUID },
> + { },
> +};
> +static struct wmi_driver bios_attr_set_interface_driver = {
> + .driver = {
> + .name = DRIVER_NAME
> + },
> + .probe = bios_attr_set_interface_probe,
> + .remove = bios_attr_set_interface_remove,
> + .id_table = bios_attr_set_interface_id_table,
> +};
> +
> +int init_bios_attr_set_interface(void)
> +{
> + return wmi_driver_register(&bios_attr_set_interface_driver);
> +}
> +
> +void exit_bios_attr_set_interface(void)
> +{
> + wmi_driver_unregister(&bios_attr_set_interface_driver);
> +}
> +
> +MODULE_DEVICE_TABLE(wmi, bios_attr_set_interface_id_table);
> diff --git a/drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h b/drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h
> new file mode 100644
> index 000000000000..5074592dbfc4
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h
> @@ -0,0 +1,195 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + * Definitions for kernel modules using Dell WMI System Management Driver
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#ifndef _DELL_WMI_BIOS_ATTR_H_
> +#define _DELL_WMI_BIOS_ATTR_H_
> +
> +#include <linux/wmi.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/capability.h>
> +
> +#define DRIVER_NAME "dell-wmi-sysman"
> +#define MAX_BUFF 512
> +
> +#define DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF5"
> +#define DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BFA"
> +#define DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF9"
> +#define DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID "0894B8D6-44A6-4719-97D7-6AD24108BFD4"
> +#define DELL_WMI_BIOS_ATTRIBUTES_INTERFACE_GUID "F1DDEE52-063C-4784-A11E-8A06684B9BF4"
> +#define DELL_WMI_BIOS_PASSWORD_INTERFACE_GUID "70FE8229-D03B-4214-A1C6-1F884B1A892A"
> +
> +struct enumeration_data {
> + struct kobject *attr_name_kobj;
> + char display_name_language_code[MAX_BUFF];
> + char attribute_name[MAX_BUFF];
> + char display_name[MAX_BUFF];
> + char default_value[MAX_BUFF];
> + char current_value[MAX_BUFF];
> + char dell_modifier[MAX_BUFF];
> + int value_modifier_count;
> + char dell_value_modifier[MAX_BUFF];
> + int possible_values_count;
> + char possible_values[MAX_BUFF];
> + char type[MAX_BUFF];
type can just be a "const char *" and then
in the populate function you can simply do:

wmi_priv.enumeration_data[instance_id].type = "enumeration";

This saves some space in the struct and saves a strcpy
during init.

This should still work fine with the attribute_s_property_show macro.

> +};
> +
> +struct integer_data {
> + struct kobject *attr_name_kobj;
> + char display_name_language_code[MAX_BUFF];
> + char attribute_name[MAX_BUFF];
> + char display_name[MAX_BUFF];
> + int default_value;
> + int current_value;
> + char dell_modifier[MAX_BUFF];
> + int min_value;
> + int max_value;
> + int scalar_increment;
> + char type[MAX_BUFF];

Idem.

> +};
> +
> +struct str_data {
> + struct kobject *attr_name_kobj;
> + char display_name_language_code[MAX_BUFF];
> + char attribute_name[MAX_BUFF];
> + char display_name[MAX_BUFF];
> + char default_value[MAX_BUFF];
> + char current_value[MAX_BUFF];
> + char dell_modifier[MAX_BUFF];
> + int min_length;
> + int max_length;
> + char type[MAX_BUFF];

Idem.

> +};
> +
> +struct po_data {
> + struct kobject *attr_name_kobj;
> + char attribute_name[MAX_BUFF];
> + int is_enabled;
> + int min_password_length;
> + int max_password_length;
> +};
> +
> +struct wmi_sysman_priv {
> + char current_admin_password[MAX_BUFF];
> + char current_system_password[MAX_BUFF];
> + struct wmi_device *password_attr_wdev;
> + struct wmi_device *bios_attr_wdev;
> + struct kset *authentication_dir_kset;
> + struct kset *main_dir_kset;
> + struct enumeration_data *enumeration_data;
> + int enumeration_instances_count;
> + struct integer_data *integer_data;
> + int integer_instances_count;
> + struct str_data *str_data;
> + int str_instances_count;
> + struct po_data *po_data;
> + int po_instances_count;
> + bool pending_changes;
> + struct mutex mutex;
> +};
> +
> +/* global structure used by multiple WMI interfaces */
> +extern struct wmi_sysman_priv wmi_priv;
> +
> +enum { ENUM, INT, STR, PO };
> +
> +enum {
> + ATTR_NAME,
> + DISPL_NAME_LANG_CODE,
> + DISPLAY_NAME,
> + DEFAULT_VAL,
> + CURRENT_VAL,
> + MODIFIER
> +};
> +
> +#define get_instance_id(type) \
> +int get_##type##_instance_id(struct kobject *kobj); \

This prototype declaration is not useful, if you actually implement the
function immediately afterwards, please drop it.

Also I believe that you only use these in the c file where they are declared,
so I think that this can be static ?

> +int get_##type##_instance_id(struct kobject *kobj) \
> +{ \
> + int i; \
> + for (i = 0; i <= wmi_priv.type##_instances_count; i++) { \
> + if (!(strcmp(kobj->name, wmi_priv.type##_data[i].attribute_name)))\
> + return i; \
> + } \
> + return -EIO; \
> +}
> +
> +#define attribute_s_property_show(name, type) \
> +static ssize_t name##_show(struct kobject *kobj, struct kobj_attribute *attr, \
> + char *buf) \
> +{ \
> + int i = get_##type##_instance_id(kobj); \
> + if (i >= 0) \
> + return sprintf(buf, "%s\n", wmi_priv.type##_data[i].name); \
> + return 0; \
> +}
> +
> +#define attribute_n_property_show(name, type) \
> +static ssize_t name##_show(struct kobject *kobj, struct kobj_attribute *attr, \
> + char *buf) \
> +{ \
> + int i = get_##type##_instance_id(kobj); \
> + if (i >= 0) \
> + return sprintf(buf, "%d\n", wmi_priv.type##_data[i].name); \
> + return 0; \
> +}
> +
> +#define attribute_property_store(curr_val, type) \
> +static ssize_t curr_val##_store(struct kobject *kobj, \
> + struct kobj_attribute *attr, \
> + const char *buf, size_t count) \
> +{ \
> + char *p = memchr(buf, '\n', count); \
> + int ret = -EIO; \
> + int i; \
> + \
> + if (p != NULL) \
> + *p = '\0'; \

Buf is declared as a const char * so you should not modify it,
I'm somewhat surprised that the compiler did not catch this.

The caller is not expecting the contents of buf to change and
there is no guarantee that in the future the kernel will not call this
with a read-pnly mapped page as buf, so you really must not modify
buf here. I can understand the desire to deal with a possible extra
'\n' here rather then in various places, this means that you will need
to kstrdup the buffer.

> + i = get_##type##_instance_id(kobj); \
> + if (i >= 0) \
> + ret = validate_##type##_input(i, buf); \
> + if (!ret) \
> + ret = set_attribute(kobj->name, buf); \

So it took me some time to grok that the second if never was true in
the i < 0 case because ret is initialized to -EIO.

IMHO the code would be more readable if it was written like this
(I've also thrown in the strdup) :

ssize_t ret;

i = get_##type##_instance_id(kobj);
if (i < 0)
return i;
mybuf = kstrdup(buf, GFP_KERNEL);
if (!mybuf)
return -ENOMEM;
p = strchr(mybuf, '\n');
if (p != NULL)
*p = '\0';
ret = validate_##type##_input(i, buf);
if (ret)
goto out:;
ret = set_attribute(kobj->name, buf);
if (ret)
goto out:;
ret = count;
out:
kfree(mybuf);
return ret;
}


> + return ret ? ret : count; \
> +}
> +
> +union acpi_object *get_wmiobj_pointer(int instance_id, const char *guid_string);
> +int get_instance_count(const char *guid_string);
> +void strlcpy_attr(char *dest, char *src);
> +
> +int populate_enum_data(union acpi_object *enumeration_obj, int instance_id,
> + struct kobject *attr_name_kobj);
> +int alloc_enum_data(void);
> +void exit_enum_attributes(void);
> +
> +int populate_int_data(union acpi_object *integer_obj, int instance_id,
> + struct kobject *attr_name_kobj);
> +int alloc_int_data(void);
> +void exit_int_attributes(void);
> +
> +int populate_str_data(union acpi_object *str_obj, int instance_id, struct kobject *attr_name_kobj);
> +int alloc_str_data(void);
> +void exit_str_attributes(void);
> +
> +int populate_po_data(union acpi_object *po_obj, int instance_id, struct kobject *attr_name_kobj);
> +int alloc_po_data(void);
> +void exit_po_attributes(void);
> +
> +int set_attribute(const char *a_name, const char *a_value);
> +int set_bios_defaults(u8 defType);
> +
> +void exit_bios_attr_set_interface(void);
> +int init_bios_attr_set_interface(void);
> +int map_wmi_error(int error_code);
> +size_t calculate_security_buffer(void);
> +void populate_security_buffer(char *buffer, char *authentication);
> +
> +int set_new_password(const char *password_type, const char *new);
> +int init_bios_attr_pass_interface(void);
> +void exit_bios_attr_pass_interface(void);
> +
> +#endif
> diff --git a/drivers/platform/x86/dell-wmi-sysman/enum-attributes.c b/drivers/platform/x86/dell-wmi-sysman/enum-attributes.c
> new file mode 100644
> index 000000000000..cfcb226db634
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/enum-attributes.c
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to enumeration type attributes under BIOS Enumeration GUID for use
> + * with dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include "dell-wmi-sysman.h"
> +
> +get_instance_id(enumeration);
> +
> +static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + int instance_id;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;

Sorry for not addressing this during earlier reviews, but why is this
check here. Is read-only access to the settings by normal users
considered harmful ?

> + instance_id = get_enumeration_instance_id(kobj);

Can we please move the error return to directly below
the function call and propagate the error please?
So make it:

instance_id = get_enumeration_instance_id(kobj);
if (instance_id < 0)
return instance_id;
/* Non error path code here */
return sprintf(buf, "%s\n", wmi_priv.enumeration_data[instance_id].current_value);
This is the normal way of error handling in the kernel, the
if (success) method gets unwieldly with nested success checks:
if (success) {
...
if (success) {
...
if (success) {
...
> + if (instance_id >= 0) {
> + union acpi_object *obj;
> +
> + /* need to use specific instance_id and guid combination to get right data */
> + obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
> + if (!obj)
> + return -AE_ERROR;

-AE_ERROR is not a standard errno.h error code, so it should not be used here.

> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].current_value,
> + obj->package.elements[CURRENT_VAL].string.pointer);
> + kfree(obj);
> + return sprintf(buf, "%s\n", wmi_priv.enumeration_data[instance_id].current_value);

Why do the strcpy at all, why not directly sprintf the obj->package.elements[CURRENT_VAL].string.pointer ?
the only advantage I see to the strcpy is not overflowing buf.

How about this instead:

union acpi_object *obj;
ssize_t ret;

instance_id = get_enumeration_instance_id(kobj);
if (instance_id < 0)
return instance_id;
obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
if (!obj)
return -EIO;
sprintf(buf, "%s\n",
ret = snprintf(buf, PAGE_SIZE, "%s\n", obj->package.elements[CURRENT_VAL].string.pointer);
kfree(obj);
return ret;
}
Then we can completely drop the current_value member from struct enumeration_data.

> + }
> + return -EIO;
> +}
> +
> +/**
> + * validate_enumeration_input() - Validate input of current_value against possible values
> + * @instance_id: The instance on which input is validated
> + * @buf: Input value
> + **/

The kernel typically terminates kerneldoc comments with a standard '*/'
terminator (not '**/'). Note this comment applies to all kerneldoc comments
in the patch.

> +static int validate_enumeration_input(int instance_id, const char *buf)
> +{
> + char *options, *tmp, *p;
> + int ret = -EINVAL;
> +
> + options = tmp = kstrdup(wmi_priv.enumeration_data[instance_id].possible_values,
> + GFP_KERNEL);
> + if (!options)
> + return -ENOMEM;
> +
> + while ((p = strsep(&options, ";")) != NULL) {
> + if (!*p)
> + continue;
> + if (!strncasecmp(p, buf, strlen(p))) {

So using strncasecmp here is usually done to get rid of the '\n' but it
is a bit finicky and as such you got it wrong here, of say "Enabled"
is a valid value and the user passes "EnabledFooBar" then this
will get accepted because the first 7 chars match. Since you
are already dealing with the \n in the caller you can just drop the
"n" part of the strncasecmp to fix this.

Also are you sure you want a strcasecmp here ? That makes the compare
case-insensitive. So IOW that means that enabled and ENABLED are also
acceptable.





> + ret = 0;
> + break;
> + }
> + }
> +
> + kfree(tmp);
> + return ret;
> +}
> +
> +attribute_s_property_show(display_name_language_code, enumeration);
> +static struct kobj_attribute displ_langcode =
> + __ATTR_RO(display_name_language_code);
> +
> +attribute_s_property_show(display_name, enumeration);
> +static struct kobj_attribute displ_name =
> + __ATTR_RO(display_name);
> +
> +attribute_s_property_show(default_value, enumeration);
> +static struct kobj_attribute default_val =
> + __ATTR_RO(default_value);
> +
> +attribute_property_store(current_value, enumeration);
> +static struct kobj_attribute current_val =
> + __ATTR_RW(current_value);
> +
> +attribute_s_property_show(dell_modifier, enumeration);
> +static struct kobj_attribute modifier =
> + __ATTR_RO(dell_modifier);
> +
> +attribute_s_property_show(dell_value_modifier, enumeration);
> +static struct kobj_attribute value_modfr =
> + __ATTR_RO(dell_value_modifier);
> +
> +attribute_s_property_show(possible_values, enumeration);
> +static struct kobj_attribute poss_val =
> + __ATTR_RO(possible_values);
> +
> +attribute_s_property_show(type, enumeration);
> +static struct kobj_attribute type =
> + __ATTR_RO(type);
> +
> +static struct attribute *enumeration_attrs[] = {
> + &displ_langcode.attr,
> + &displ_name.attr,
> + &default_val.attr,
> + &current_val.attr,
> + &modifier.attr,
> + &value_modfr.attr,
> + &poss_val.attr,
> + &type.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group enumeration_attr_group = {
> + .attrs = enumeration_attrs,
> +};
> +
> +int alloc_enum_data(void)
> +{
> + int ret = 0;
> +
> + wmi_priv.enumeration_instances_count =
> + get_instance_count(DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
> + wmi_priv.enumeration_data = kcalloc(wmi_priv.enumeration_instances_count,
> + sizeof(struct enumeration_data), GFP_KERNEL);
> + if (!wmi_priv.enumeration_data)
> + ret = -ENOMEM;

If we hit this path then exit_enum_attributes() will still get called,
and will dereference wmi_priv.enumeration_data which is NULL.

I suggest changing this to:

if (!wmi_priv.enumeration_data) {
wmi_priv.enumeration_instances_count = 0;
return -ENOMEM;
}
return 0;
}
To avoid this, the same goes for the other alloc_*_data() functions.


> + return ret;
> +}
> +
> +/**
> + * populate_enum_data() - Populate all properties of an instance under enumeration attribute
> + * @enumeration_obj: ACPI object with enumeration data
> + * @instance_id: The instance to enumerate
> + * @attr_name_kobj: The parent kernel object
> + **/
> +int populate_enum_data(union acpi_object *enumeration_obj, int instance_id,
> + struct kobject *attr_name_kobj)
> +{
> + int i, next_obj;
> +
> + wmi_priv.enumeration_data[instance_id].attr_name_kobj = attr_name_kobj;
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].attribute_name,
> + enumeration_obj[ATTR_NAME].string.pointer);
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].display_name_language_code,
> + enumeration_obj[DISPL_NAME_LANG_CODE].string.pointer);
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].display_name,
> + enumeration_obj[DISPLAY_NAME].string.pointer);
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].default_value,
> + enumeration_obj[DEFAULT_VAL].string.pointer);
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].current_value,
> + enumeration_obj[CURRENT_VAL].string.pointer);

There is no reason to store current_value here, since show_current_value
overwrites it before showing; and if we go with my suggestion it can
be completely dropped from the struct.

> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].dell_modifier,
> + enumeration_obj[MODIFIER].string.pointer);
> +
> + next_obj = MODIFIER + 1;
> +
> + wmi_priv.enumeration_data[instance_id].value_modifier_count =
> + (uintptr_t)enumeration_obj[next_obj].string.pointer;

There is no reason to store value_modifier_count this is only used once
below, so this can be a local variable in this function.

> +
> + for (i = 0; i < wmi_priv.enumeration_data[instance_id].value_modifier_count; i++) {
> + strcat(wmi_priv.enumeration_data[instance_id].dell_value_modifier,
> + enumeration_obj[++next_obj].string.pointer);
> + strcat(wmi_priv.enumeration_data[instance_id].dell_value_modifier, ";");
> + }
> +
> + wmi_priv.enumeration_data[instance_id].possible_values_count =
> + (uintptr_t) enumeration_obj[++next_obj].string.pointer;

Same comment as for value_modifier_count.

> + for (i = 0; i < wmi_priv.enumeration_data[instance_id].possible_values_count; i++) {
> + strcat(wmi_priv.enumeration_data[instance_id].possible_values,
> + enumeration_obj[++next_obj].string.pointer);
> + strcat(wmi_priv.enumeration_data[instance_id].possible_values, ";");
> + }
> + strlcpy_attr(wmi_priv.enumeration_data[instance_id].type, "enumeration");

As mentioned above this can be simplified to just:

wmi_priv.enumeration_data[instance_id].type = "enumeration";

> +
> + return sysfs_create_group(attr_name_kobj, &enumeration_attr_group);
> +}
> +
> +/**
> + * exit_enum_attributes() - Clear all attribute data
> + *
> + * Clears all data allocated for this group of attributes
> + **/
> +void exit_enum_attributes(void)
> +{
> + int instance_id;
> +
> + for (instance_id = 0; instance_id < wmi_priv.enumeration_instances_count; instance_id++) {
> + if (wmi_priv.enumeration_data[instance_id].attr_name_kobj)
> + sysfs_remove_group(wmi_priv.enumeration_data[instance_id].attr_name_kobj,
> + &enumeration_attr_group);
> + }
> + kfree(wmi_priv.enumeration_data);
> +}
> diff --git a/drivers/platform/x86/dell-wmi-sysman/int-attributes.c b/drivers/platform/x86/dell-wmi-sysman/int-attributes.c
> new file mode 100644
> index 000000000000..f668d69eaf09
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/int-attributes.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to integer type attributes under BIOS Integer GUID for use with
> + * dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include "dell-wmi-sysman.h"
> +
> +enum int_properties {MIN_VALUE = 6, MAX_VALUE, SCALAR_INCR};
> +
> +get_instance_id(integer);
> +
> +static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + int instance_id;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> + instance_id = get_integer_instance_id(kobj);
> + if (instance_id >= 0) {
> + union acpi_object *obj;
> +
> + /* need to use specific instance_id and guid combination to get right data */
> + obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
> + if (!obj)
> + return -AE_ERROR;
> + wmi_priv.integer_data[instance_id].current_value =
> + (uintptr_t)obj->package.elements[CURRENT_VAL].string.pointer;
> + kfree(obj);
> + return sprintf(buf, "%d\n", wmi_priv.integer_data[instance_id].current_value);
> + }
> + return -EIO;

Same remarks as for the current_value_show code from enum-attributes.c.

> +}
> +
> +/**
> + * validate_integer_input() - Validate input of current_value against lower and upper bound
> + * @instance_id: The instance on which input is validated
> + * @buf: Input value
> + **/
> +static int validate_integer_input(int instance_id, const char *buf)
> +{
> + int ret = -EINVAL;
> + int in_val;
> +
> + if (kstrtoint(buf, 0, &in_val))
> + return ret;

Maybe:

ret = kstrtoint(buf, 0, &in_val);
if (ret)
return ret;
So as to propagate the actual error from kstrtoint. which is usually
-EINVAL, but may be -ERANGE for when passing in e.g. "10000000000".
> + if ((in_val >= wmi_priv.integer_data[instance_id].min_value) &&
> + (in_val <= wmi_priv.integer_data[instance_id].max_value))
> + ret = 0;

And then change this in:

if (in_val < wmi_priv.integer_data[instance_id].min_value ||
in_val > wmi_priv.integer_data[instance_id].max_value)
return -EINVAL;
return 0;

Also note the alignment of the second line of the if condition
behind the '(' of the first line (as Mark also pointed out).


> +
> + return ret;
> +}
> +
> +attribute_s_property_show(display_name_language_code, integer);
> +static struct kobj_attribute integer_displ_langcode =
> + __ATTR_RO(display_name_language_code);
> +
> +attribute_s_property_show(display_name, integer);
> +static struct kobj_attribute integer_displ_name =
> + __ATTR_RO(display_name);
> +
> +attribute_n_property_show(default_value, integer);
> +static struct kobj_attribute integer_default_val =
> + __ATTR_RO(default_value);
> +
> +attribute_property_store(current_value, integer);
> +static struct kobj_attribute integer_current_val =
> + __ATTR_RW(current_value);
> +
> +attribute_s_property_show(dell_modifier, integer);
> +static struct kobj_attribute integer_modifier =
> + __ATTR_RO(dell_modifier);
> +
> +attribute_n_property_show(min_value, integer);
> +static struct kobj_attribute integer_lower_bound =
> + __ATTR_RO(min_value);
> +
> +attribute_n_property_show(max_value, integer);
> +static struct kobj_attribute integer_upper_bound =
> + __ATTR_RO(max_value);
> +
> +attribute_n_property_show(scalar_increment, integer);
> +static struct kobj_attribute integer_scalar_increment =
> + __ATTR_RO(scalar_increment);
> +
> +attribute_s_property_show(type, integer);
> +static struct kobj_attribute integer_type =
> + __ATTR_RO(type);
> +
> +static struct attribute *integer_attrs[] = {
> + &integer_displ_langcode.attr,
> + &integer_displ_name.attr,
> + &integer_default_val.attr,
> + &integer_current_val.attr,
> + &integer_modifier.attr,
> + &integer_lower_bound.attr,
> + &integer_upper_bound.attr,
> + &integer_scalar_increment.attr,
> + &integer_type.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group integer_attr_group = {
> + .attrs = integer_attrs,
> +};
> +
> +int alloc_int_data(void)
> +{
> + int ret = 0;
> +
> + wmi_priv.integer_instances_count = get_instance_count(DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
> + wmi_priv.integer_data = kcalloc(wmi_priv.integer_instances_count,
> + sizeof(struct integer_data), GFP_KERNEL);
> + if (!wmi_priv.integer_data)
> + ret = -ENOMEM;
> + return ret;
> +}
> +
> +/**
> + * populate_int_data() - Populate all properties of an instance under integer attribute
> + * @integer_obj: ACPI object with integer data
> + * @instance_id: The instance to enumerate
> + * @attr_name_kobj: The parent kernel object
> + **/
> +int populate_int_data(union acpi_object *integer_obj, int instance_id,
> + struct kobject *attr_name_kobj)
> +{
> + wmi_priv.integer_data[instance_id].attr_name_kobj = attr_name_kobj;
> + strlcpy_attr(wmi_priv.integer_data[instance_id].attribute_name,
> + integer_obj[ATTR_NAME].string.pointer);
> + strlcpy_attr(wmi_priv.integer_data[instance_id].display_name_language_code,
> + integer_obj[DISPL_NAME_LANG_CODE].string.pointer);
> + strlcpy_attr(wmi_priv.integer_data[instance_id].display_name,
> + integer_obj[DISPLAY_NAME].string.pointer);
> + wmi_priv.integer_data[instance_id].default_value =
> + (uintptr_t)integer_obj[DEFAULT_VAL].string.pointer;
> + wmi_priv.integer_data[instance_id].current_value =
> + (uintptr_t)integer_obj[CURRENT_VAL].string.pointer;
> + strlcpy_attr(wmi_priv.integer_data[instance_id].dell_modifier,
> + integer_obj[MODIFIER].string.pointer);
> + wmi_priv.integer_data[instance_id].min_value =
> + (uintptr_t)integer_obj[MIN_VALUE].string.pointer;
> + wmi_priv.integer_data[instance_id].max_value =
> + (uintptr_t)integer_obj[MAX_VALUE].string.pointer;
> + wmi_priv.integer_data[instance_id].scalar_increment =
> + (uintptr_t)integer_obj[SCALAR_INCR].string.pointer;
> + strlcpy_attr(wmi_priv.integer_data[instance_id].type, "integer");

As for enumeration, if you change type in the struct to a "const char *"
thenthis can just be:

wmi_priv.integer_data[instance_id].type = "integer";

> + return sysfs_create_group(attr_name_kobj, &integer_attr_group);
> +}
> +
> +/**
> + * exit_int_attributes() - Clear all attribute data
> + *
> + * Clears all data allocated for this group of attributes
> + **/
> +void exit_int_attributes(void)
> +{
> + int instance_id;
> +
> + for (instance_id = 0; instance_id < wmi_priv.integer_instances_count; instance_id++) {
> + if (wmi_priv.integer_data[instance_id].attr_name_kobj)
> + sysfs_remove_group(wmi_priv.integer_data[instance_id].attr_name_kobj,
> + &integer_attr_group);
> + }
> + kfree(wmi_priv.integer_data);
> +}
> diff --git a/drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c b/drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c
> new file mode 100644
> index 000000000000..9c56718afd06
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c
> @@ -0,0 +1,171 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to password object type attributes under BIOS Password Object GUID for
> + * use with dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include "dell-wmi-sysman.h"
> +
> +enum po_properties {IS_PASS_SET = 1, MIN_PASS_LEN, MAX_PASS_LEN};
> +
> +get_instance_id(po);
> +
> +static ssize_t is_enabled_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + int instance_id = get_po_instance_id(kobj);
> +
> + if (instance_id >= 0) {
> + union acpi_object *obj;
> +
> + /* need to use specific instance_id and guid combination to get right data */
> + obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
> + if (!obj)
> + return -AE_ERROR;
> + wmi_priv.po_data[instance_id].is_enabled =
> + (uintptr_t)obj->package.elements[IS_PASS_SET].string.pointer;
> + kfree(obj);
> + return sprintf(buf, "%d\n", wmi_priv.po_data[instance_id].is_enabled);
> + }
> + return -EIO;

More or less the same remarks as with current_value_show for enums and ints:

1. Please propagate the error value from get_po_instance_id() and put the
error return directly under the call.

2. There is no need to store is_enabled in wmi_priv.po_data since you query it here,
you can use it directly without storing an unnecessary copy.


> +}
> +
> +struct kobj_attribute po_is_pass_set =
> + __ATTR_RO(is_enabled);
> +
> +static ssize_t current_password_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + char *p = memchr(buf, '\n', count);
> + int ret;
> +
> + if (p != NULL)
> + *p = '\0';

As before you are modifying a const char * argument here. I think in this
case you can avoid the strdup by:

1) Get the length of buf
2) do length-- if the last char is '\n'
3) check the length after the (optional length--)
4) memcpy-ing length bytes + manual 0 terminate it.

> + if (strlen(buf) >= MAX_BUFF)
> + return -EINVAL;

Maybe also check against min/max password lenght here?

I guess that is mostly important when changing the password, since
if the length is not valid then it is just a wrong password.

So I guess it is fine to only check for not exceeding MAX_BUF here.

> +
> + if (strcmp(kobj->name, "Admin") == 0)
> + memcpy(wmi_priv.current_admin_password, buf, (strlen(buf) + 1));
> + if (strcmp(kobj->name, "System") == 0)
> + memcpy(wmi_priv.current_system_password, buf, (strlen(buf) + 1));

What if the kobj->name matches neither (with some future BIOS version) ?
Maybe return -EIO like in role_show() ?

> + return ret ? ret : count;
> +}
> +
> +struct kobj_attribute po_current_password =
> + __ATTR_WO(current_password);
> +
> +static ssize_t new_password_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + char *p = memchr(buf, '\n', count);
> + int ret;
> +
> + if (p != NULL)
> + *p = '\0';

Same as above (modifying a const char * buffer).

> + if (strlen(buf) > MAX_BUFF)
> + return -EINVAL;

I believe that here you really should check against the passwd
min/max length ?

> +
> + ret = set_new_password(kobj->name, buf);
> + return ret ? ret : count;
> +}
> +
> +struct kobj_attribute po_new_password =
> + __ATTR_WO(new_password);
> +
> +attribute_n_property_show(min_password_length, po);
> +struct kobj_attribute po_min_pass_length =
> + __ATTR_RO(min_password_length);
> +
> +attribute_n_property_show(max_password_length, po);
> +struct kobj_attribute po_max_pass_length =
> + __ATTR_RO(max_password_length);
> +
> +static ssize_t mechanism_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "password\n");
> +}

Why not also do this for the type show functions in:
enum-attributes.c, int-attributes.c, string-attributes.c ?

I think that would be even better then my original suggestion to
make the type struct members a "const char *" . There really is
no need to lookup the instance-id for the type_show function, so
doing this will both make the function and the data structs smaller.

> +
> +struct kobj_attribute po_mechanism =
> + __ATTR_RO(mechanism);
> +
> +static ssize_t role_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + if (strcmp(kobj->name, "Admin") == 0)
> + return sprintf(buf, "bios-admin\n");
> + else if (strcmp(kobj->name, "System") == 0)
> + return sprintf(buf, "power-on\n");
> + return -EIO;
> +}
> +
> +struct kobj_attribute po_role =
> + __ATTR_RO(role);
> +
> +static struct attribute *po_attrs[] = {
> + &po_is_pass_set.attr,
> + &po_min_pass_length.attr,
> + &po_max_pass_length.attr,
> + &po_current_password.attr,
> + &po_new_password.attr,
> + &po_role.attr,
> + &po_mechanism.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group po_attr_group = {
> + .attrs = po_attrs,
> +};
> +
> +int alloc_po_data(void)
> +{
> + int ret = 0;
> +
> + wmi_priv.po_instances_count = get_instance_count(DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
> + wmi_priv.po_data = kcalloc(wmi_priv.po_instances_count, sizeof(struct po_data), GFP_KERNEL);
> + if (!wmi_priv.po_data)
> + ret = -ENOMEM;
> + return ret;
> +}
> +
> +/**
> + * populate_po_data() - Populate all properties of an instance under password object attribute
> + * @po_obj: ACPI object with password object data
> + * @instance_id: The instance to enumerate
> + * @attr_name_kobj: The parent kernel object
> + **/
> +int populate_po_data(union acpi_object *po_obj, int instance_id, struct kobject *attr_name_kobj)
> +{
> + wmi_priv.po_data[instance_id].attr_name_kobj = attr_name_kobj;
> + strlcpy_attr(wmi_priv.po_data[instance_id].attribute_name,
> + po_obj[ATTR_NAME].string.pointer);
> + wmi_priv.po_data[instance_id].is_enabled =
> + (uintptr_t)po_obj[IS_PASS_SET].string.pointer;
> + wmi_priv.po_data[instance_id].min_password_length =
> + (uintptr_t)po_obj[MIN_PASS_LEN].string.pointer;
> + wmi_priv.po_data[instance_id].max_password_length =
> + (uintptr_t) po_obj[MAX_PASS_LEN].string.pointer;
> +
> + return sysfs_create_group(attr_name_kobj, &po_attr_group);
> +}
> +
> +/**
> + * exit_po_attributes() - Clear all attribute data
> + *
> + * Clears all data allocated for this group of attributes
> + **/
> +void exit_po_attributes(void)
> +{
> + int instance_id;
> +
> + for (instance_id = 0; instance_id < wmi_priv.po_instances_count; instance_id++) {
> + if (wmi_priv.po_data[instance_id].attr_name_kobj)
> + sysfs_remove_group(wmi_priv.po_data[instance_id].attr_name_kobj,
> + &po_attr_group);
> + }
> + kfree(wmi_priv.po_data);
> +}
> diff --git a/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c b/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> new file mode 100644
> index 000000000000..40854a2c09a8
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to SET password methods under BIOS attributes interface GUID
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include <linux/nls.h>
> +#include <linux/wmi.h>
> +#include "dell-wmi-sysman.h"
> +
> +static int call_password_interface(struct wmi_device *wdev, char *in_args, size_t size)
> +{
> + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
> + struct acpi_buffer input;
> + union acpi_object *obj;
> + acpi_status status;
> + int ret = -EIO;
> +
> + input.length = (acpi_size) size;
> + input.pointer = in_args;
> + status = wmidev_evaluate_method(wdev, 0, 1, &input, &output);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> + obj = (union acpi_object *)output.pointer;
> + if (obj->type == ACPI_TYPE_INTEGER)
> + ret = obj->integer.value;
> +
> + kfree(output.pointer);
> + /* let userland know it may need to check is_password_set again */
> + kobject_uevent(&wdev->dev.kobj, KOBJ_CHANGE);

I think it would make more sense to to this in the class_dev
created in sysman_init() that way all the uevents come from a single dev
rather then from 2 different wmi-devices.

> + return map_wmi_error(ret);
> +}
> +
> +/**
> + * set_new_password() - Sets a system admin password
> + * @password_type: The type of password to set
> + * @new: The new password
> + *
> + * Sets the password using plaintext interface
> + **/
> +int set_new_password(const char *password_type, const char *new)
> +{
> + char *current_password, *type_value, *old_value, *new_value;
> + size_t security_area_size, string_area_size, buffer_size;
> + u8 *type_len, *old_len, *new_len;
> + char *buffer = NULL;
> + int ret;
> +
> + mutex_lock(&wmi_priv.mutex);
> + if (!wmi_priv.password_attr_wdev) {
> + ret = -ENODEV;
> + goto out;
> + }
> + if (strcmp(password_type, "Admin") == 0) {
> + current_password = wmi_priv.current_admin_password;
> + } else if (strcmp(password_type, "System") == 0) {
> + current_password = wmi_priv.current_system_password;
> + } else {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "unknown password type %s\n",
> + password_type);
> + goto out;
> + }
> +
> + /* build/calculate buffer */
> + security_area_size = calculate_security_buffer();
> + string_area_size = (strlen(password_type) + strlen(current_password) + strlen(new))*2;
> + buffer_size = security_area_size + string_area_size + sizeof(u16) * 3;
> + buffer = kzalloc(buffer_size, GFP_KERNEL);
> + if (!buffer) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + /* build security area */
> + if (strlen(wmi_priv.current_admin_password) > 0)
> + populate_security_buffer(buffer, wmi_priv.current_admin_password);
> +
> + /* build variables to set */
> + type_len = buffer + security_area_size;
> + type_value = type_len + sizeof(u16);
> + *type_len = utf8s_to_utf16s(password_type, strlen(password_type), UTF16_HOST_ENDIAN,
> + (wchar_t *) type_value, MAX_BUFF) * 2;
> + if (*type_len < 0) {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "UTF16 conversion failed\n");
> + goto out;
> + }
> +
> + old_len = type_value + *type_len;
> + old_value = old_len + sizeof(u16);
> + *old_len = utf8s_to_utf16s(current_password, strlen(current_password), UTF16_HOST_ENDIAN,
> + (wchar_t *) old_value, MAX_BUFF) * 2;
> + if (*old_len < 0) {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "UTF16 conversion failed\n");
> + goto out;
> + }
> +
> + new_len = old_value + *old_len;
> + new_value = new_len + sizeof(u16);
> + *new_len = utf8s_to_utf16s(new, strlen(new), UTF16_HOST_ENDIAN,
> + (wchar_t *) new_value, MAX_BUFF) * 2;
> + if (*new_len < 0) {
> + ret = -EINVAL;
> + dev_err(&wmi_priv.password_attr_wdev->dev, "UTF16 conversion failed\n");
> + goto out;
> + }
> +
> + ret = call_password_interface(wmi_priv.password_attr_wdev, buffer, buffer_size);
> + /* clear current_password here and use user input from wmi_priv.current_password */
> + if (!ret)
> + current_password = "";
> + /* explain to user the detailed failure reason */
> + else if (ret == -EOPNOTSUPP)
> + dev_err(&wmi_priv.password_attr_wdev->dev, "admin password must be configured\n");
> + else if (ret == -EACCES)
> + dev_err(&wmi_priv.password_attr_wdev->dev, "invalid password\n");

Pretty much all my remarks about set_attribute() apply here too.

Except for my comment about the device argument to the dev_err calls being wrong
in set_attribute(), using &wmi_priv.password_attr_wdev->dev is correct here.

> +
> +out:
> + kfree(buffer);
> + mutex_unlock(&wmi_priv.mutex);
> +
> + return ret;
> +}
> +
> +static int bios_attr_pass_interface_probe(struct wmi_device *wdev, const void *context)
> +{
> + mutex_lock(&wmi_priv.mutex);
> + wmi_priv.password_attr_wdev = wdev;
> + mutex_unlock(&wmi_priv.mutex);
> + return 0;
> +}
> +
> +static int bios_attr_pass_interface_remove(struct wmi_device *wdev)
> +{
> + mutex_lock(&wmi_priv.mutex);
> + wmi_priv.password_attr_wdev = NULL;
> + mutex_unlock(&wmi_priv.mutex);
> + return 0;
> +}
> +
> +static const struct wmi_device_id bios_attr_pass_interface_id_table[] = {
> + { .guid_string = DELL_WMI_BIOS_PASSWORD_INTERFACE_GUID },
> + { },
> +};
> +static struct wmi_driver bios_attr_pass_interface_driver = {
> + .driver = {
> + .name = DRIVER_NAME"-password"
> + },
> + .probe = bios_attr_pass_interface_probe,
> + .remove = bios_attr_pass_interface_remove,
> + .id_table = bios_attr_pass_interface_id_table,
> +};
> +
> +int init_bios_attr_pass_interface(void)
> +{
> + return wmi_driver_register(&bios_attr_pass_interface_driver);
> +}
> +
> +void exit_bios_attr_pass_interface(void)
> +{
> + wmi_driver_unregister(&bios_attr_pass_interface_driver);
> +}
> +
> +MODULE_DEVICE_TABLE(wmi, bios_attr_pass_interface_id_table);
> diff --git a/drivers/platform/x86/dell-wmi-sysman/string-attributes.c b/drivers/platform/x86/dell-wmi-sysman/string-attributes.c
> new file mode 100644
> index 000000000000..6b9948157b8d
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/string-attributes.c
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Functions corresponding to string type attributes under BIOS String GUID for use with
> + * dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#include "dell-wmi-sysman.h"
> +
> +enum string_properties {MIN_LEN = 6, MAX_LEN};
> +
> +get_instance_id(str);
> +
> +static ssize_t current_value_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + int instance_id;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> + instance_id = get_str_instance_id(kobj);
> + if (instance_id >= 0) {
> + union acpi_object *obj;
> +
> + /* need to use specific instance_id and guid combination to get right data */
> + obj = get_wmiobj_pointer(instance_id, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
> + if (!obj)
> + return -AE_ERROR;
> + strlcpy_attr(wmi_priv.str_data[instance_id].current_value,
> + obj->package.elements[CURRENT_VAL].string.pointer);
> + kfree(obj);
> + return sprintf(buf, "%s\n", wmi_priv.str_data[instance_id].current_value);
> + }
> + return -EIO;

Same remarks as for the current_value_show code from enum-attributes.c.

> +}
> +
> +/**
> + * validate_str_input() - Validate input of current_value against min and max lengths
> + * @instance_id: The instance on which input is validated
> + * @buf: Input value
> + **/
> +static int validate_str_input(int instance_id, const char *buf)
> +{
> + int in_len = strlen(buf);
> +
> + if ((in_len >= wmi_priv.str_data[instance_id].min_length) &&
> + (in_len <= wmi_priv.str_data[instance_id].max_length))

Indentation is off here.

Also I have a slight preference for checking for the length being wrong
here and have the return -EINVAL here, like in the modified
validate_integer_input().

> + return 0;
> +
> + return -EINVAL;
> +}
> +
> +attribute_s_property_show(display_name_language_code, str);
> +static struct kobj_attribute str_displ_langcode =
> + __ATTR_RO(display_name_language_code);
> +
> +attribute_s_property_show(display_name, str);
> +static struct kobj_attribute str_displ_name =
> + __ATTR_RO(display_name);
> +
> +attribute_s_property_show(default_value, str);
> +static struct kobj_attribute str_default_val =
> + __ATTR_RO(default_value);
> +
> +attribute_property_store(current_value, str);
> +static struct kobj_attribute str_current_val =
> + __ATTR_RW(current_value);
> +
> +attribute_s_property_show(dell_modifier, str);
> +static struct kobj_attribute str_modifier =
> + __ATTR_RO(dell_modifier);
> +
> +attribute_n_property_show(min_length, str);
> +static struct kobj_attribute str_min_length =
> + __ATTR_RO(min_length);
> +
> +attribute_n_property_show(max_length, str);
> +static struct kobj_attribute str_max_length =
> + __ATTR_RO(max_length);
> +
> +attribute_s_property_show(type, str);
> +static struct kobj_attribute str_type =
> + __ATTR_RO(type);
> +
> +static struct attribute *str_attrs[] = {
> + &str_displ_langcode.attr,
> + &str_displ_name.attr,
> + &str_default_val.attr,
> + &str_current_val.attr,
> + &str_modifier.attr,
> + &str_min_length.attr,
> + &str_max_length.attr,
> + &str_type.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group str_attr_group = {
> + .attrs = str_attrs,
> +};
> +
> +int alloc_str_data(void)
> +{
> + int ret = 0;
> +
> + wmi_priv.str_instances_count = get_instance_count(DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
> + wmi_priv.str_data = kcalloc(wmi_priv.str_instances_count,
> + sizeof(struct str_data), GFP_KERNEL);
> + if (!wmi_priv.str_data)
> + ret = -ENOMEM;
> + return ret;
> +}
> +
> +/**
> + * populate_str_data() - Populate all properties of an instance under string attribute
> + * @str_obj: ACPI object with integer data
> + * @instance_id: The instance to enumerate
> + * @attr_name_kobj: The parent kernel object
> + **/
> +int populate_str_data(union acpi_object *str_obj, int instance_id, struct kobject *attr_name_kobj)
> +{
> + wmi_priv.str_data[instance_id].attr_name_kobj = attr_name_kobj;
> + strlcpy_attr(wmi_priv.str_data[instance_id].attribute_name,
> + str_obj[ATTR_NAME].string.pointer);
> + strlcpy_attr(wmi_priv.str_data[instance_id].display_name_language_code,
> + str_obj[DISPL_NAME_LANG_CODE].string.pointer);
> + strlcpy_attr(wmi_priv.str_data[instance_id].display_name,
> + str_obj[DISPLAY_NAME].string.pointer);
> + strlcpy_attr(wmi_priv.str_data[instance_id].default_value,
> + str_obj[DEFAULT_VAL].string.pointer);
> + strlcpy_attr(wmi_priv.str_data[instance_id].current_value,
> + str_obj[CURRENT_VAL].string.pointer);
> + strlcpy_attr(wmi_priv.str_data[instance_id].dell_modifier,
> + str_obj[MODIFIER].string.pointer);
> + wmi_priv.str_data[instance_id].min_length = (uintptr_t)str_obj[MIN_LEN].string.pointer;
> + wmi_priv.str_data[instance_id].max_length = (uintptr_t) str_obj[MAX_LEN].string.pointer;
> + strlcpy_attr(wmi_priv.str_data[instance_id].type, "string");

Please use a dedicated show_type function instead, like you do for show_mechanism
in the password code.

> +
> + return sysfs_create_group(attr_name_kobj, &str_attr_group);
> +}
> +
> +/**
> + * exit_str_attributes() - Clear all attribute data
> + *
> + * Clears all data allocated for this group of attributes
> + **/
> +void exit_str_attributes(void)
> +{
> + int instance_id;
> +
> + for (instance_id = 0; instance_id < wmi_priv.str_instances_count; instance_id++) {
> + if (wmi_priv.str_data[instance_id].attr_name_kobj)
> + sysfs_remove_group(wmi_priv.str_data[instance_id].attr_name_kobj,
> + &str_attr_group);
> + }
> + kfree(wmi_priv.str_data);
> +}
> diff --git a/drivers/platform/x86/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell-wmi-sysman/sysman.c
> new file mode 100644
> index 000000000000..df32abe5261e
> --- /dev/null
> +++ b/drivers/platform/x86/dell-wmi-sysman/sysman.c
> @@ -0,0 +1,589 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Common methods for use with dell-wmi-sysman
> + *
> + * Copyright (c) 2020 Dell Inc.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/fs.h>
> +#include <linux/dmi.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/wmi.h>
> +#include "dell-wmi-sysman.h"
> +
> +#define MAX_TYPES 4
> +
> +static struct class firmware_attributes_class = {
> + .name = "firmware-attributes",
> +};
> +
> +struct wmi_sysman_priv wmi_priv = {
> + .mutex = __MUTEX_INITIALIZER(wmi_priv.mutex),
> +};
> +
> +/* reset bios to defaults */
> +static const char * const reset_types[] = {"builtinsafe", "lastknowngood", "factory", "custom"};
> +static int reset_option = -1;
> +
> +/**
> + * calculate_security_buffer() - determines size of security buffer for authentication scheme
> + *
> + * Currently only supported type is Admin password
> + **/
> +size_t calculate_security_buffer(void)
> +{
> + if (strlen(wmi_priv.current_admin_password) > 0) {
> + return (sizeof(u32) * 2) +
> + strlen(wmi_priv.current_admin_password) +
> + strlen(wmi_priv.current_admin_password) % 2;
> + }
> + return sizeof(u32) * 2;
> +}
> +
> +/**
> + * populate_security_buffer() - builds a security buffer for authentication scheme
> + * @buffer: the buffer to populate
> + * @authentication: the authentication content
> + *
> + * Currently only supported type is PLAIN TEXT
> + **/
> +void populate_security_buffer(char *buffer, char *authentication)
> +{
> + char *auth = buffer + sizeof(u32)*2;
> + u32 *sectype = (u32 *) buffer;
> + u32 *seclen = sectype + 1;
> + /* plain text */
> + *sectype = 1;
> + *seclen = strlen(authentication);
> + memcpy(auth, authentication, *seclen);
> +}

Why does populate_security_buffer() get the password passed in,
while calculate_security_buffer() does not ? That is not consistent.

Also see my earlier remarks about adding a strlen() > 0 check
to populate_security_buffer() to make it consistent with how
calculate_security_buffer() works.
> +
> +/**
> + * map_wmi_error() - map errors from WMI methods to kernel error codes
> + * @error_code: integer error code returned from Dell's firmware
> + **/
> +int map_wmi_error(int error_code)
> +{
> + switch (error_code) {
> + case 0:
> + /* success */
> + return 0;
> + case 1:
> + /* failed */
> + return -EIO;
> + case 2:
> + /* invalid parameter */
> + return -EINVAL;
> + case 3:
> + /* access denied */
> + return -EACCES;
> + case 4:
> + /* not supported */
> + return -EOPNOTSUPP;
> + case 5:
> + /* memory error */
> + return -ENOMEM;
> + case 6:
> + /* protocol error */
> + return -EPROTO;
> + }
> + /* unspecified error */
> + return -EIO;
> +}
> +
> +/**
> + * reset_bios_show() - sysfs implementaton for read reset_bios
> + * @kobj: Kernel object for this attribute
> + * @attr: Kernel object attribute
> + * @buf: The buffer to display to userspace
> + **/
> +static ssize_t reset_bios_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> +{
> + char *start = buf;
> + int i;
> +
> + for (i = 0; i < MAX_TYPES; i++) {
> + if (i == reset_option)
> + buf += sprintf(buf, "[%s] ", reset_types[i]);
> + else
> + buf += sprintf(buf, "%s ", reset_types[i]);
> + }
> + buf += sprintf(buf, "\n");
> + return buf-start;
> +}
> +
> +/**
> + * reset_bios_store() - sysfs implementaton for write reset_bios
> + * @kobj: Kernel object for this attribute
> + * @attr: Kernel object attribute
> + * @buf: The buffer from userspace
> + * @count: the size of the buffer from userspace
> + **/
> +static ssize_t reset_bios_store(struct kobject *kobj,
> + struct kobj_attribute *attr, const char *buf, size_t count)
> +{
> + int len, ret, i;
> + int type = -1;
> + char *p;
> +
> + p = memchr(buf, '\n', count);
> + if (p != NULL)
> + *p = '\0';

As before. you are modifying a const char * buffer here.

> + len = p ? p - buf : count;
> +
> + for (i = 0; i < MAX_TYPES; i++) {
> + if (len == strlen(reset_types[i])
> + && !strncmp(buf, reset_types[i], len)) {
> + type = i;
> + break;
> + }
> + }
> +
> + if (type < 0 || type >= MAX_TYPES) {
> + ret = -EINVAL;
> + goto out;
> + }

All this code can be replaced with:

type = sysfs_match_string(reset_types, buf);
if (type < 0)
return type;
That will also take care of the optional extra '\n' for you.

> +
> + ret = set_bios_defaults(type);
> + pr_debug("reset all attributes request type %d: %d\n", type, ret);
> + if (ret) {
> + ret = -EINVAL;

Why not propagate the error code used by set_bios_defaults here?

E.g. make the code look like this:

ret = set_bios_defaults(type);
pr_debug("reset all attributes request type %d: %d\n", type, ret);
if (!ret) {
reset_option = type;
ret = count; }


> + }
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * pending_reboot_show() - sysfs implementaton for read pending_reboot
> + * @kobj: Kernel object for this attribute
> + * @attr: Kernel object attribute
> + * @buf: The buffer to display to userspace
> + *
> + * Stores default value as 0
> + * When current_value is changed this attribute is set to 1 to notify reboot may be required
> + **/
> +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%d\n", wmi_priv.pending_changes);
> +}
> +
> +static struct kobj_attribute reset_bios = __ATTR_RW(reset_bios);
> +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot);
> +
> +
> +/**
> + * create_reset_bios() - Creates reset_bios and pending_reboot attributes
> + **/

The name suggests this creates a single ssysfs file, but it creates
2 files. Maybe rename this function to "create_toplevel_sysfs_files"
or something else ?

> +static int create_reset_bios(void)
> +{
> + int ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
> +
> + if (ret) {
> + pr_debug("could not create reset_bios file\n");
> + return ret;
> + }
> +
> + ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr);
> + if (ret) {
> + pr_debug("could not create changing_pending_reboot file\n");
> + sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
> + }
> + return ret;
> +}
> +
> +static void release_reset_bios_data(void)
> +{
> + sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
> + sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr);
> +}
> +
> +static ssize_t wmi_sysman_attr_show(struct kobject *kobj, struct attribute *attr,
> + char *buf)
> +{
> + struct kobj_attribute *kattr;
> + ssize_t ret = -EIO;
> +
> + kattr = container_of(attr, struct kobj_attribute, attr);
> + if (kattr->show)
> + ret = kattr->show(kobj, kattr, buf);
> + return ret;
> +}
> +
> +static ssize_t wmi_sysman_attr_store(struct kobject *kobj, struct attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct kobj_attribute *kattr;
> + ssize_t ret = -EIO;
> +
> + kattr = container_of(attr, struct kobj_attribute, attr);
> + if (kattr->store)
> + ret = kattr->store(kobj, kattr, buf, count);
> + return ret;
> +}
> +
> +const struct sysfs_ops wmi_sysman_kobj_sysfs_ops = {
> + .show = wmi_sysman_attr_show,
> + .store = wmi_sysman_attr_store,
> +};
> +
> +static void attr_name_release(struct kobject *kobj)
> +{
> + kfree(kobj);
> +}
> +
> +static struct kobj_type attr_name_ktype = {
> + .release = attr_name_release,
> + .sysfs_ops = &wmi_sysman_kobj_sysfs_ops,
> +};
> +
> +/**
> + * strlcpy_attr - Copy a length-limited, NULL-terminated string with bound checks
> + * @dest: Where to copy the string to
> + * @src: Where to copy the string from
> + **/
> +void strlcpy_attr(char *dest, char *src)
> +{
> + size_t len = strlen(src) + 1;
> +
> + if (len > 1 && len < MAX_BUFF)
> + strlcpy(dest, src, len);
> +
> + /*len can be zero because any property not-applicable to attribute can
> + * be empty so check only for too long buffers and log error
> + */
> + if (len > MAX_BUFF)
> + pr_err("Source string returned from BIOS is out of bound!\n");

If len == MAX_BUFF you neither strlcpy, nor print an error.

Since you set len to strlen(src) + 1, the first check should be:

if (len > 1 && len <= MAX_BUFF)
strlcpy(dest, src, len);

> +}
> +
> +/**
> + * get_wmiobj_pointer() - Get Content of WMI block for particular instance
> + * @instance_id: WMI instance ID
> + * @guid_string: WMI GUID (in str form)
> + *
> + * Fetches the content for WMI block (instance_id) under GUID (guid_string)
> + * Caller must kfree the return
> + **/
> +union acpi_object *get_wmiobj_pointer(int instance_id, const char *guid_string)
> +{
> + struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> +
> + status = wmi_query_block(guid_string, instance_id, &out);
> +
> + return ACPI_SUCCESS(status) ? (union acpi_object *)out.pointer : NULL;
> +}
> +
> +/**
> + * get_instance_count() - Compute total number of instances under guid_string
> + * @guid_string: WMI GUID (in string form)
> + **/
> +int get_instance_count(const char *guid_string)
> +{
> + union acpi_object *wmi_obj = NULL;
> + int i = 0;
> +
> + do {
> + kfree(wmi_obj);
> + wmi_obj = get_wmiobj_pointer(i, guid_string);
> + i++;
> + } while (wmi_obj);
> +
> + return (i-1);
> +}
> +
> +/**
> + * alloc_attributes_data() - Allocate attributes data for a particular type
> + * @attr_type: Attribute type to allocate
> + **/
> +static int alloc_attributes_data(int attr_type)
> +{
> + int retval = 0;
> +
> + switch (attr_type) {
> + case ENUM:
> + retval = alloc_enum_data();
> + break;
> + case INT:
> + retval = alloc_int_data();
> + break;
> + case STR:
> + retval = alloc_str_data();
> + break;
> + case PO:
> + retval = alloc_po_data();
> + break;
> + default:
> + break;
> + }
> +
> + return retval;
> +}
> +
> +/**
> + * destroy_attribute_objs() - Free a kset of kobjects
> + * @kset: The kset to destroy
> + *
> + * Fress kobjects created for each attribute_name under attribute type kset
> + **/
> +static void destroy_attribute_objs(struct kset *kset)
> +{
> + struct kobject *pos, *next;
> +
> + list_for_each_entry_safe(pos, next, &kset->list, entry) {
> + kobject_put(pos);
> + }
> +}
> +
> +/**
> + * release_attributes_data() - Clean-up all sysfs directories and files created
> + **/
> +static void release_attributes_data(void)
> +{
> + release_reset_bios_data();
> +
> + mutex_lock(&wmi_priv.mutex);
> + exit_enum_attributes();
> + exit_int_attributes();
> + exit_str_attributes();
> + exit_po_attributes();
> + destroy_attribute_objs(wmi_priv.main_dir_kset);
> + destroy_attribute_objs(wmi_priv.authentication_dir_kset);
> + kset_unregister(wmi_priv.main_dir_kset);
> + kset_unregister(wmi_priv.authentication_dir_kset);
> + mutex_unlock(&wmi_priv.mutex);
> +
> +}
> +
> +/**
> + * init_bios_attributes() - Initialize all attributes for a type
> + * @attr_type: The attribute type to initialize
> + * @guid: The WMI GUID associated with this type to initialize
> + *
> + * Initialiaze all 4 types of attributes enumeration, integer, string and password object.
> + * Populates each attrbute typ's respective properties under sysfs files
> + **/
> +static int init_bios_attributes(int attr_type, const char *guid)
> +{
> + struct kobject *attr_name_kobj; //individual attribute names
> + union acpi_object *obj = NULL;
> + union acpi_object *elements;
> + struct kset *tmp_set;
> +
> + /* instance_id needs to be reset for each type GUID
> + * also, instance IDs are unique within GUID but not across
> + */
> + int instance_id = 0;
> + int retval = 0;
> +
> + retval = alloc_attributes_data(attr_type);
> + if (retval)
> + return retval;
> + /* need to use specific instance_id and guid combination to get right data */
> + obj = get_wmiobj_pointer(instance_id, guid);
> + if (!obj)
> + return -ENODEV;
> + elements = obj->package.elements;
> +
> + mutex_lock(&wmi_priv.mutex);
> + while (elements) {
> + /* sanity checking */
> + if (strlen(elements[ATTR_NAME].string.pointer) == 0) {
> + pr_debug("empty attribute found\n");
> + goto nextobj;
> + }
> + if (attr_type == PO)
> + tmp_set = wmi_priv.authentication_dir_kset;
> + else
> + tmp_set = wmi_priv.main_dir_kset;
> +
> + if (kset_find_obj(tmp_set, elements[ATTR_NAME].string.pointer)) {
> + pr_debug("duplicate attribute name found - %s\n",
> + elements[ATTR_NAME].string.pointer);
> + goto nextobj;
> + }
> +
> + /* build attribute */
> + attr_name_kobj = kzalloc(sizeof(*attr_name_kobj), GFP_KERNEL);
> + if (!attr_name_kobj)
> + goto err_attr_init;
> +
> + attr_name_kobj->kset = tmp_set;
> +
> + retval = kobject_init_and_add(attr_name_kobj, &attr_name_ktype, NULL, "%s",
> + elements[ATTR_NAME].string.pointer);
> + if (retval) {
> + kobject_put(attr_name_kobj);
> + goto err_attr_init;
> + }
> +
> + /* enumerate all of this attribute */
> + switch (attr_type) {
> + case ENUM:
> + retval = populate_enum_data(elements, instance_id, attr_name_kobj);
> + break;
> + case INT:
> + retval = populate_int_data(elements, instance_id, attr_name_kobj);
> + break;
> + case STR:
> + retval = populate_str_data(elements, instance_id, attr_name_kobj);
> + break;
> + case PO:
> + retval = populate_po_data(elements, instance_id, attr_name_kobj);
> + break;
> + default:
> + break;
> + }

The show functions don't take the mutex and can be called as soon as
kobject_init_and_add() is called, so it would be better to first populate the
data for the current instance_id and only then call kobject_init_and_add()

> +
> + if (retval) {
> + pr_debug("failed to populate %s\n",
> + elements[ATTR_NAME].string.pointer);
> + goto err_attr_init;
> + }
> +
> +nextobj:
> + kfree(obj);
> + instance_id++;
> + obj = get_wmiobj_pointer(instance_id, guid);
> + elements = obj ? obj->package.elements : NULL;
> + }
> +
> + goto out;
> +
> +err_attr_init:
> + release_attributes_data();
> + kfree(obj);
> +out:
> + mutex_unlock(&wmi_priv.mutex);
> + return retval;
> +}
> +
> +static int __init sysman_init(void)
> +{
> + int ret = 0;
> + struct device *class_dev;
> +
> + if (!dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "Dell System", NULL) &&
> + !dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "www.dell.com", NULL)) {
> + pr_err("Unable to run on non-Dell system\n");
> + return -ENODEV;
> + }
> +
> + ret = init_bios_attr_set_interface();
> + if (ret || !wmi_priv.bios_attr_wdev) {
> + pr_debug("failed to initialize set interface\n");
> + goto fail_set_interface;
> + }
> +
> + ret = init_bios_attr_pass_interface();
> + if (ret || !wmi_priv.password_attr_wdev) {
> + pr_debug("failed to initialize pass interface\n");
> + goto fail_pass_interface;
> + }
> +
> + ret = class_register(&firmware_attributes_class);
> + if (ret)
> + goto fail_class;
> +
> + class_dev = device_create(&firmware_attributes_class, NULL, MKDEV(0, 0),
> + NULL, "%s", DRIVER_NAME);
> + if (IS_ERR(class_dev)) {
> + ret = PTR_ERR(class_dev);
> + goto fail_classdev;
> + }
> +
> + wmi_priv.main_dir_kset = kset_create_and_add("attributes", NULL,
> + &class_dev->kobj);
> + if (!wmi_priv.main_dir_kset) {
> + ret = -ENOMEM;
> + goto fail_main_kset;
> + }
> +
> + wmi_priv.authentication_dir_kset = kset_create_and_add("authentication", NULL,
> + &class_dev->kobj);
> + if (!wmi_priv.authentication_dir_kset) {
> + ret = -ENOMEM;
> + goto fail_authentication_kset;
> + }
> +
> + ret = create_reset_bios();
> + if (ret) {
> + pr_debug("could not create reset BIOS attribute\n");
> + goto fail_reset_bios;
> + }
> +
> + ret = init_bios_attributes(ENUM, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
> + if (ret) {
> + pr_debug("failed to populate enumeration type attributes\n");
> + goto fail_create_group;
> + }
> +
> + ret = init_bios_attributes(INT, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
> + if (ret) {
> + pr_debug("failed to populate integer type attributes\n");
> + goto fail_create_group;
> + }
> +
> + ret = init_bios_attributes(STR, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
> + if (ret) {
> + pr_debug("failed to populate string type attributes\n");
> + goto fail_create_group;
> + }
> +
> + ret = init_bios_attributes(PO, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
> + if (ret) {
> + pr_debug("failed to populate pass object type attributes\n");
> + goto fail_create_group;
> + }
> +
> + return 0;
> +
> +fail_create_group:
> + release_attributes_data();
> +
> +fail_reset_bios:
> + kset_unregister(wmi_priv.authentication_dir_kset);
> +
> +fail_authentication_kset:
> + kset_unregister(wmi_priv.main_dir_kset);

These 2 kset unregister calls are already done by release_attributes_data();
I'm not sure unregistering them twice is a good idea ?

> +
> +fail_main_kset:
> + device_destroy(&firmware_attributes_class, MKDEV(0, 0));
> +
> +fail_classdev:
> + class_unregister(&firmware_attributes_class);
> +
> +fail_class:
> + exit_bios_attr_pass_interface();
> +
> +fail_pass_interface:
> + exit_bios_attr_set_interface();
> +
> +fail_set_interface:
> + return ret;
> +}
> +
> +static void __exit sysman_exit(void)
> +{
> + release_attributes_data();
> + exit_bios_attr_set_interface();
> + exit_bios_attr_pass_interface();
> + device_destroy(&firmware_attributes_class, MKDEV(0, 0));
> + class_unregister(&firmware_attributes_class);

The teardown order here is different from that in the error handling of
sysman_init(), please make it the same:

release_attributes_data();
device_destroy(&firmware_attributes_class, MKDEV(0, 0));
class_unregister(&firmware_attributes_class);
exit_bios_attr_set_interface();
exit_bios_attr_pass_interface();


> +}
> +
> +module_init(sysman_init);
> +module_exit(sysman_exit);
> +
> +MODULE_AUTHOR("Mario Limonciello <mario.limonciello@dell.com>");
> +MODULE_AUTHOR("Prasanth Ksr <prasanth.ksr@dell.com>");
> +MODULE_AUTHOR("Divya Bharathi <divya.bharathi@dell.com>");
> +MODULE_DESCRIPTION("Dell platform setting control interface");
> +MODULE_LICENSE("GPL");
>

Regards,

Hans

\
 
 \ /
  Last update: 2020-10-01 20:22    [W:0.292 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site