lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/3] hwmon: (lm75) Add regulator support
From
Date
On 10/1/20 7:57 AM, Alban Bedel wrote:
> Add regulator support for boards where the sensor first need to be
> powered up before it can be used.
>
> Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
> ---
> v2: Rely on dummy regulators instead of explicitly handling missing
> regulator
> v3: Use a devm action to handle disabling the regulator
> ---

Second '---' is not needed.

I can not apply patches 1 and 2 of the series since I don't have an
Ack from a DT maintainer, but this one looks good. Applied.

Guenter


> drivers/hwmon/lm75.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index ba0be48aeadd..e9c1f55b2706 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -17,6 +17,7 @@
> #include <linux/of.h>
> #include <linux/regmap.h>
> #include <linux/util_macros.h>
> +#include <linux/regulator/consumer.h>
> #include "lm75.h"
>
> /*
> @@ -101,6 +102,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
> struct lm75_data {
> struct i2c_client *client;
> struct regmap *regmap;
> + struct regulator *vs;
> u8 orig_conf;
> u8 current_conf;
> u8 resolution; /* In bits, 9 to 16 */
> @@ -534,6 +536,13 @@ static const struct regmap_config lm75_regmap_config = {
> .use_single_write = true,
> };
>
> +static void lm75_disable_regulator(void *data)
> +{
> + struct lm75_data *lm75 = data;
> +
> + regulator_disable(lm75->vs);
> +}
> +
> static void lm75_remove(void *data)
> {
> struct lm75_data *lm75 = data;
> @@ -567,6 +576,10 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
> data->client = client;
> data->kind = kind;
>
> + data->vs = devm_regulator_get(dev, "vs");
> + if (IS_ERR(data->vs))
> + return PTR_ERR(data->vs);
> +
> data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
> if (IS_ERR(data->regmap))
> return PTR_ERR(data->regmap);
> @@ -581,6 +594,17 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
> data->sample_time = data->params->default_sample_time;
> data->resolution = data->params->default_resolution;
>
> + /* Enable the power */
> + err = regulator_enable(data->vs);
> + if (err) {
> + dev_err(dev, "failed to enable regulator: %d\n", err);
> + return err;
> + }
> +
> + err = devm_add_action_or_reset(dev, lm75_disable_regulator, data);
> + if (err)
> + return err;
> +
> /* Cache original configuration */
> status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
> if (status < 0) {
>

\
 
 \ /
  Last update: 2020-10-01 20:14    [W:0.076 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site