lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 RESEND 8/9] spi: spi-s3c64xx: Increase transfer timeout
Date
Increase timeout by 30 ms for some wiggle room and set the minimum value
to 100 ms. This ensures a non-zero value for short transfers which
may take less than 1 ms. The timeout value does not affect
performance because it is used with a completion.

Similar formula is used in other drivers e.g. sun4i, sun6i.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
drivers/spi/spi-s3c64xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 89c162efe355..ea5a22dec53d 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -473,7 +473,8 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,

/* millisecs to xfer 'len' bytes @ 'cur_speed' */
ms = xfer->len * 8 * 1000 / sdd->cur_speed;
- ms += 10; /* some tolerance */
+ ms += 30; /* some tolerance */
+ ms = max(ms, 100); /* minimum timeout */

val = msecs_to_jiffies(ms) + 10;
val = wait_for_completion_timeout(&sdd->xfer_completion, val);
--
2.26.2
\
 
 \ /
  Last update: 2020-10-01 17:23    [W:0.226 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site