lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 00/13] Add RCEC handling to PCI/AER
On Wed, 30 Sep 2020 14:58:07 -0700
Sean V Kelley <seanvk.dev@oregontracks.org> wrote:

> From: Sean V Kelley <sean.v.kelley@intel.com>
>
> Changes since v6 [1]:
>
> - Remove unused includes in rcec.c.
> - Add local variable for dev->rcec_ea.
> - If no valid capability version then just fill in nextbusn = 0xff.
> - Leave a blank line after pci_rcec_init(dev).
> - Reword commit w/ "Attempt to do a function level reset for an RCiEP on fatal error."
> - Change An RCiEP found on bus in range -> An RCiEP found on a different bus in range
> - Remove special check on capability version if you fill in nextbusn = 0xff.
> - Remove blank lines in pcie_link_rcec header.
> - Fix indentation aer.c.
> (Jonathan Cameron)
>
> - Relocate enabling of PME for RCECs to later RCEC handling additions to PME.
> - Rename rcec_ext to rcec_ea.
> - Remove rcec_cap as its use can be handled with rcec_ea.
> - Add a forward declaration for struct rcec_ea.
> - Rename pci_bridge_walk() to pci_walk_bridge() to match consistency with other usage.
> - Separate changes to "reset_subordinate_devices" because it doesn't change the interface.
> - Separate the use of "type", rename of "dev" to "bridge", the inversion of the condition and
> use of pci_upstream_bridge() instead of dev->bus->self.
> - Separate the conditional check (TYPE_ROOT_PORT and TYPE_DOWNSTREAM) for AER resets.
> - Consider embedding RCiEP's parent RCEC in the rcec_ea struct. However, the
> issue here is that we don't normally allocate the rcec_ea struct for RCiEPs and
> the linkage of rcec_ea->rcec is not necessarily more clear.
> - Provide more comment on the non-native case for clarity.
> (Bjorn Helgaas)
>
> [1] https://lore.kernel.org/linux-pci/20200922213859.108826-1-seanvk.dev@oregontracks.org/
>
> Root Complex Event Collectors (RCEC) provide support for terminating error
> and PME messages from Root Complex Integrated Endpoints (RCiEPs). An RCEC
> resides on a Bus in the Root Complex. Multiple RCECs can in fact reside on
> a single bus. An RCEC will explicitly declare supported RCiEPs through the
> Root Complex Endpoint Association Extended Capability.
>
> (See PCIe 5.0-1, sections 1.3.2.3 (RCiEP), and 7.9.10 (RCEC Ext. Cap.))
>
> The kernel lacks handling for these RCECs and the error messages received
> from their respective associated RCiEPs. More recently, a new CPU
> interconnect, Compute eXpress Link (CXL) depends on RCEC capabilities for
> purposes of error messaging from CXL 1.1 supported RCiEP devices.
>
> DocLink: https://www.computeexpresslink.org/
>
> This use case is not limited to CXL. Existing hardware today includes
> support for RCECs, such as the Denverton microserver product
> family. Future hardware will be forthcoming.
>
> (See Intel Document, Order number: 33061-003US)
>
> So services such as AER or PME could be associated with an RCEC driver.
> In the case of CXL, if an RCiEP (i.e., CXL 1.1 device) is associated with a
> platform's RCEC it shall signal PME and AER error conditions through that
> RCEC.
>
> Towards the above use cases, add the missing RCEC class and extend the
> PCIe Root Port and service drivers to allow association of RCiEPs to their
> respective parent RCEC and facilitate handling of terminating error and PME
> messages.

I took a look at the combined result of the series as well as individual
patches I've acked. All looks good to me.

Also ran a quick batch of tests with the non-native / no visible RCEC case
and that's working as expected. Feels a bit odd too give a tested-by for
the case that touches only a tiny corner of the code, but if you want to include
it...

Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #non-native/no RCEC

Thanks,

Jonathan

>
>
> Jonathan Cameron (1):
> PCI/AER: Extend AER error handling to RCECs
>
> Qiuxu Zhuo (5):
> PCI/RCEC: Add RCEC class code and extended capability
> PCI/RCEC: Bind RCEC devices to the Root Port driver
> PCI/AER: Apply function level reset to RCiEP on fatal error
> PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
> PCI/AER: Add RCEC AER error injection support
>
> Sean V Kelley (7):
> PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities()
> PCI/ERR: Rename reset_link() to reset_subordinate_device()
> PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()
> PCI/ERR: Limit AER resets in pcie_do_recovery()
> PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs
> PCI/AER: Add pcie_walk_rcec() to RCEC AER handling
> PCI/PME: Add pcie_walk_rcec() to RCEC PME handling
>
> drivers/pci/pci.h | 25 ++++-
> drivers/pci/pcie/Makefile | 2 +-
> drivers/pci/pcie/aer.c | 36 ++++--
> drivers/pci/pcie/aer_inject.c | 5 +-
> drivers/pci/pcie/err.c | 109 +++++++++++++++----
> drivers/pci/pcie/pme.c | 15 ++-
> drivers/pci/pcie/portdrv_core.c | 8 +-
> drivers/pci/pcie/portdrv_pci.c | 8 +-
> drivers/pci/pcie/rcec.c | 187 ++++++++++++++++++++++++++++++++
> drivers/pci/probe.c | 2 +
> include/linux/pci.h | 5 +
> include/linux/pci_ids.h | 1 +
> include/uapi/linux/pci_regs.h | 7 ++
> 13 files changed, 367 insertions(+), 43 deletions(-)
> create mode 100644 drivers/pci/pcie/rcec.c
>
> --
> 2.28.0
>


\
 
 \ /
  Last update: 2020-10-01 12:18    [W:0.099 / U:4.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site