lkml.org 
[lkml]   [2020]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 06/13] PCI/ERR: Limit AER resets in pcie_do_recovery()
On Wed, 30 Sep 2020 14:58:13 -0700
Sean V Kelley <seanvk.dev@oregontracks.org> wrote:

> From: Sean V Kelley <sean.v.kelley@intel.com>
>
> In some cases a bridge may not exist as the hardware
> controlling may be handled only by firmware and so is
> not visible to the OS. This scenario is also possible
> in future use cases involving non-native use of RCECs
> by firmware. So explicitly apply conditional logic
> around these resets by limiting them to root ports and
> downstream ports.
>
> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
> drivers/pci/pcie/err.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index c6922c099c76..9e552330155b 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -203,9 +203,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> pci_dbg(dev, "broadcast resume message\n");
> pci_walk_bus(bus, report_resume, &status);
>
> - if (pcie_aer_is_native(dev))
> - pcie_clear_device_status(dev);
> - pci_aer_clear_nonfatal_status(dev);
> + if (type == PCI_EXP_TYPE_ROOT_PORT ||
> + type == PCI_EXP_TYPE_DOWNSTREAM) {
> + if (pcie_aer_is_native(bridge))
> + pcie_clear_device_status(bridge);
> + pci_aer_clear_nonfatal_status(bridge);
> + }
> pci_info(dev, "device recovery successful\n");
> return status;
>


\
 
 \ /
  Last update: 2020-10-01 12:03    [W:1.261 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site