lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] efi: arm: defer probe of PCIe backed efifb on DT systems
On Thu, 9 Jan 2020 at 19:53, Saravana Kannan <saravanak@google.com> wrote:
>
> On Thu, Jan 9, 2020 at 6:06 AM Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> >
> > On Tue, 24 Dec 2019 at 05:41, Saravana Kannan <saravanak@google.com> wrote:
> > >
> > > From: Ard Biesheuvel <ardb@kernel.org>
> > >
> > > The new of_devlink support breaks PCIe probing on ARM platforms booting
> > > via UEFI if the firmware exposes a EFI framebuffer that is backed by a
> > > PCI device. The reason is that the probing order gets reversed,
> > > resulting in a resource conflict on the framebuffer memory window when
> > > the PCIe probes last, causing it to give up entirely.
> > >
> > > Given that we rely on PCI quirks to deal with EFI framebuffers that get
> > > moved around in memory, we cannot simply drop the memory reservation, so
> > > instead, let's use the device link infrastructure to register this
> > > dependency, and force the probing to occur in the expected order.
> > >
> > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> > > Co-developed-by: Saravana Kannan <saravanak@google.com>
> > > Signed-off-by: Saravana Kannan <saravanak@google.com>
> > > ---
> > >
> > > Hi Ard,
> > >
> > > I compile tested it and I think it should work. If you can actually run
> > > and test it, that'd be nice.
> > >
> > > You can also optimize find_pci_overlap_node() by caching the result if
> > > you think that's necessary.
> > >
> > > Right now this code will run always just like your code did. But once I
> > > rename of_devlink to fw_devlink, this code won't be run if fw_devlink is
> > > disabled.
> > >
> > > v1 -> v2:
> > > - Rewrote the device linking part to not depend on initcall ordering
> > >
> > > drivers/firmware/efi/arm-init.c | 106 ++++++++++++++++++++++++++++++--
> > > 1 file changed, 102 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
> > > index 904fa09e6a6b..8b789ff83af0 100644
> > > --- a/drivers/firmware/efi/arm-init.c
> > > +++ b/drivers/firmware/efi/arm-init.c
> > > @@ -10,10 +10,12 @@
> > > #define pr_fmt(fmt) "efi: " fmt
> > >
> > > #include <linux/efi.h>
> > > +#include <linux/fwnode.h>
> > > #include <linux/init.h>
> > > #include <linux/memblock.h>
> > > #include <linux/mm_types.h>
> > > #include <linux/of.h>
> > > +#include <linux/of_address.h>
> > > #include <linux/of_fdt.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/screen_info.h>
> > > @@ -276,15 +278,111 @@ void __init efi_init(void)
> > > efi_memmap_unmap();
> > > }
> > >
> > > +static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
> > > +{
> > > + u64 fb_base = screen_info.lfb_base;
> > > +
> > > + if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
> > > + fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
> > > +
> > > + return fb_base >= range->cpu_addr &&
> > > + fb_base < (range->cpu_addr + range->size);
> > > +}
> > > +
> > > +static struct device_node *find_pci_overlap_node(void)
> > > +{
> > > + struct device_node *np;
> > > +
> > > + for_each_node_by_type(np, "pci") {
> > > + struct of_pci_range_parser parser;
> > > + struct of_pci_range range;
> > > + int err;
> > > +
> > > + err = of_pci_range_parser_init(&parser, np);
> > > + if (err) {
> > > + pr_warn("of_pci_range_parser_init() failed: %d\n", err);
> > > + continue;
> > > + }
> > > +
> > > + for_each_of_pci_range(&parser, &range)
> > > + if (efifb_overlaps_pci_range(&range))
> > > + return np;
> > > + }
> > > + return NULL;
> > > +}
> > > +
> > > +/*
> > > + * If the efifb framebuffer is backed by a PCI graphics controller, we have
> > > + * to ensure that this relation is expressed using a device link when
> > > + * running in DT mode, or the probe order may be reversed, resulting in a
> > > + * resource reservation conflict on the memory window that the efifb
> > > + * framebuffer steals from the PCIe host bridge.
> > > + */
> > > +static int efifb_add_links(const struct fwnode_handle *fwnode,
> > > + struct device *dev)
> > > +{
> > > + struct device_node *sup_np;
> > > + struct device *sup_dev;
> > > +
> > > + sup_np = find_pci_overlap_node();
> > > +
> > > + /*
> > > + * If there's no PCI graphics controller backing the efifb, we are
> > > + * done here.
> > > + */
> > > + if (!sup_np)
> > > + return 0;
> > > +
> > > + sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
> > > + of_node_put(sup_np);
> > > +
> > > + /*
> > > + * Return -ENODEV if the PCI graphics controller device hasn't been
> > > + * registered yet. This ensures that efifb isn't allowed to probe
> > > + * and this function is retried again when new devices are
> > > + * registered.
> > > + */
> > > + if (!sup_dev)
> > > + return -ENODEV;
> > > +
> > > + /*
> > > + * If this fails, retrying this function at a later point won't
> > > + * change anything. So, don't return an error after this.
> > > + */
> > > + if (!device_link_add(dev, sup_dev, 0))
> > > + dev_warn(dev, "device_link_add() failed\n");
> > > +
> > > + put_device(sup_dev);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct fwnode_operations efifb_fwnode_ops = {
> >
> > Please make this const
>
> Ack
>
> > > + .add_links = efifb_add_links,
> > > +};
> > > +
> > > +static struct fwnode_handle efifb_fwnode = {
> > > + .ops = &efifb_fwnode_ops,
> > > +};
> > > +
> > > static int __init register_gop_device(void)
> > > {
> > > - void *pd;
> > > + struct platform_device *pd;
> > > + int err;
> > >
> > > if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
> > > return 0;
> > >
> > > - pd = platform_device_register_data(NULL, "efi-framebuffer", 0,
> > > - &screen_info, sizeof(screen_info));
> > > - return PTR_ERR_OR_ZERO(pd);
> > > + pd = platform_device_alloc("efi-framebuffer", 0);
> > > + if (!pd)
> > > + return -ENOMEM;
> > > +
> >
> > Add
> >
> > if (IS_ENABLED(CONFIG_PCI))
> >
> > here
>
> As in around the line below where I set the fwnode? Then it's going to
> warn about unused variable.

If you use if() instead of #if, the compiler will not warn about an
unused variable here.

> Maybe I should just do the if
> (IS_ENABLED(CONFIG_PCI)) inside the add_links() function to short
> circuit it.
>

No, let's put it it here.

> Responding to your other email here. Adding ifdef CONFIG_PCI was my
> first inclination, but then those 2 functions are defined if
> CONFIG_OF_ADDRESS are defined and if not the stubs are always there.
> There's no #ifdef CONFIG_PCI around any of them AFAICT. So I'm
> confused about what's going on.
>

There is

> > > + pd->dev.fwnode = &efifb_fwnode;
> > > +
> > > + err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
> > > + if (err)
> > > + return err;
> > > +
> > > + return platform_device_add(pd);
> > > }
> > > subsys_initcall(register_gop_device);
> > > --
> > > 2.24.1.735.g03f4e72817-goog
> > >
> >
> > With the changes above
>
> Yeah, will make them all.
>
> >
> > Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
> >
>
> Thanks!
>
> -Saravana

\
 
 \ /
  Last update: 2020-01-09 22:53    [W:0.075 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site