lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] pinctrl: intel: Pass irqchip when adding gpiochip
Date
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward conversion.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Please apply this to the Intel pinctrl tree when you are
happy with the result!
---
drivers/pinctrl/intel/pinctrl-intel.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index b479bcf1e246..ffacd77861f7 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1224,6 +1224,7 @@ static unsigned int intel_gpio_ngpio(const struct intel_pinctrl *pctrl)
static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
{
int ret;
+ struct gpio_irq_chip *girq;

pctrl->chip = intel_gpio_chip;

@@ -1244,16 +1245,9 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
pctrl->irqchip.irq_set_wake = intel_gpio_irq_wake;
pctrl->irqchip.flags = IRQCHIP_MASK_ON_SUSPEND;

- ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl);
- if (ret) {
- dev_err(pctrl->dev, "failed to register gpiochip\n");
- return ret;
- }
-
/*
- * We need to request the interrupt here (instead of providing chip
- * to the irq directly) because on some platforms several GPIO
- * controllers share the same interrupt line.
+ * On some platforms several GPIO controllers share the same interrupt
+ * line.
*/
ret = devm_request_irq(pctrl->dev, irq, intel_gpio_irq,
IRQF_SHARED | IRQF_NO_THREAD,
@@ -1263,14 +1257,20 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
return ret;
}

- ret = gpiochip_irqchip_add(&pctrl->chip, &pctrl->irqchip, 0,
- handle_bad_irq, IRQ_TYPE_NONE);
+ girq = &pctrl->chip.irq;
+ girq->chip = &pctrl->irqchip;
+ /* This will let us handle the IRQ in the driver */
+ girq->parent_handler = NULL;
+ girq->num_parents = 0;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+
+ ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl);
if (ret) {
- dev_err(pctrl->dev, "failed to add irqchip\n");
+ dev_err(pctrl->dev, "failed to register gpiochip\n");
return ret;
}

- gpiochip_set_chained_irqchip(&pctrl->chip, &pctrl->irqchip, irq, NULL);
return 0;
}

--
2.23.0
\
 
 \ /
  Last update: 2020-01-09 08:57    [W:0.071 / U:7.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site