lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
Date
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index a109e82982ae..d60110ad8367 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -103,6 +103,11 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
post-power-on-delay-ms = <10>;
};
+
+ ina226 {
+ compatible = "iio-hwmon";
+ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+ };
};

&dcc {
@@ -191,8 +196,9 @@ i2csw_5: i2c@5 {
#size-cells = <0>;
reg = <5>;
/* PS_PMBUS */
- ina226@40 { /* u35 */
+ u35: ina226@40 { /* u35 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
reg = <0x40>;
shunt-resistor = <10000>;
/* MIO31 is alert which should be routed to PMUFW */
--
2.24.0
\
 
 \ /
  Last update: 2020-01-09 15:03    [W:0.050 / U:4.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site